Hardtop Roof Rail Weatherstrips
p/n: 20-1159-68
This Hardtop Roof Rail Weatherstrip pair is made of ozone resistant EPDM sponge rubber with molded A pillar ends and corners for a factory like fit. These Left and Right weatherstrips fit on the roof of the vehicle and work to seal the side windows when the window is fully raised.
Vent Window Weatherstrips
p/n: 20-1109-55
This front door Vent Window Weatherstrip pair is the main vent window seals designed from original parts for a precise, factory fit. A two (2) piece pair that fits both driver (Left) and passenger (Right) front doors of the vent / wing window assemblies.
Windshield Gasket
p/n: 20-1107-50
This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Front Door Weatherstrips
p/n: 20-1183-72
This Front Door Weatherstrip pair is designed from the original parts for superior fitment and seal. These primary door weatherstrips mount (pin and glue) directly to the left and right doors sealing the full perimeter of the doors against the vehicle body when the door is closed.
Window Felt Beltline Weatherstrips
p/n: 20-1120-60
This is a Original equipment style side window horizontal weatherstrip set (also known as beltline weatherstrip). This eight (8) piece anti-rattle set includes inner and outer window felt beltline weatherstrips for each door and quarter window.
Rear Window Gasket
p/n: 20-1201-81
This Rear Window Gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. Fitted gasket provides a formed, seamless seal.
Leaf Spring Shackle Set
p/n: 20-1064-32
This Leaf Spring Shackle Set is manufactured to OEM specifications to install for an authentic fit and finish. Rear of rear spring shackle bars and bolt assembly with rubber bushings. Two (2) sets required per car.
Quarter Window Pads / Lock Pillar Filler
p/n: 20-1193-79
This Quarter Window Pads / Lock Pillar Filler pair is designed from the original part for superior fitment and seal. This part is located on the pillar above your door latch and works to seal the front lower corner of the rear side window. May also be known as a door u jamb seal.
Engine Mount - Lower
p/n: 20-1004-11
This left or right Lower Engine Mount is designed from the original part for superior performance and correct fitment. For 221, 260, 289 or 289 Hi-Po V-8 engines.
Rear Bumper To Body Stone Deflector
p/n: 20-1053-29
This Rear Bumper To Body Stone Deflector is designed from the original part for a superior fitment level. This filler piece seals between the rear bumper and the body.
Taillight to Body Gaskets
p/n: 20-1017-15
This Taillight to Body Gasket pair is designed from the original part for superior fitment and seal. These reproduction gaskets fit between taillight frame housing and the body.
Steering Column Seal
p/n: 20-1070-88
This collared Steering Column Floor Seal is designed from the original part for superior fitment and sealing. This gasket is manufactured from top quality EPDM rubber to authentic original dimensions. This part fits around the steering column to seal the column through the body floor pan.
Automatic Transmission Mount
p/n: 20-1003-11
This Automatic Transmission Mount is designed from the original part for superior fitment and seal. This rear mount fits between the transmission and the crossmember to locate and retain the rear of the engine / transmission powertrain.
Upper Engine Mount
p/n: 20-2655-11
This doughnut type Upper Engine Mount is designed from the original part for superior performance and correct fitment.
Side Window Vertical Leading Edge
p/n: 20-1197-80
This quarter and side window Vertical Leading Edge Weatherstrip pair is designed from the original part for superior fitment and seal. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised.
Voltage Regulator Cover Shield
p/n: 70-4531-17
This Voltage Regulator Cover Shield is designed from the original part for superior fitment and function. This cover shield is located over and above the voltage regulator.
Firewall to Hood Weatherstrip - Cowl Lacing
p/n: 20-1086-42
This Firewall To Hood Weatherstrip - Cowl Lacing is designed from the original part for superior fitment and seal. The weatherstrip is made of dense rubber and comes with pre-installed fastener clips.
Trunk Decklid Weatherstrip
p/n: 20-0095-84
This Trunk Decklid Weatherstrip is designed from the original part for superior fitment and seal. The weatherstrip mounts around the full perimeter of the trunk directly to the body.
Front Fender To Cowl Seals
p/n: 20-1099-45
This Front Fender To Cowl Seal pair is designed from the original part for superior fitment and seal. These filler strips fit at the rear of the front fender to the cowl side panels.
Hood Bumper
p/n: 20-0014-42
Bumpers, hood front to radiator support. Five sixteenths (5/16) inch by twenty four (24) thread.
Radiator Mounting Pads
p/n: 20-0183-31
This Radiator Mounting Pad pair is designed from the original part for superior fitment and function. These upper mounting pads secure and isolate the radiator at its upper mounting point.
Stabilizer Bar End Link Repair Set
p/n: 20-1068-33
This eleven (11) piece Stabilizer Bar End Link Repair Set is designed to withstand harsh conditions without deteriorating. Two (2) end link sets required per car.
Parking Light Lens Gaskets
p/n: 20-1023-16
This Parking Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the Parking Light Lens and the Parking Light Housing or Bezel.
Clutch or Brake Pedal Pad
p/n: 20-0848-22
This reproduction Clutch and/or Brake Pedal Pad slips over the full perimeter of the pedal for a precise, factory fit. A perfect reproduction to replace worn original pedal pads. Manufactured in quality black rubber.
Door Bumper
p/n: 20-0003-71
Bumpers, door. Seven sixteenths (7/16) inch high. Fits on door jamb where rear of door closes against body and on rear lower part of door.
Taillight Lens Gaskets - With Back Up Lights
p/n: 20-1008-15
This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the taillight lens and taillight housing. For Fairlane models WITH back up lights except Station Wagons.
Taillight Lens Gaskets - Without Back Up Lights
p/n: 20-1007-15
This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the taillight lens and taillight housing. For Fairlane models WITHOUT back up lights except Station Wagons.
Lower Door and Fuel Tank Door Bumpers
p/n: 20-0004-71
Manufactured to OEM specifications this Lower Door and Fuel Tank Door Bumper pair installs for an authentic fit, finish and function. Five eighths (5/8") inches high. Installs on door jamb where rear of door closes against body and on rear lower part of door.
Rear Spring Pad
p/n: 20-1275-32
This Rear Spring Pad is used as a spring insert silencer. The leaf spring insulator installs between the leaves.
Glovebox or Fuel Tank Filler Door Bumpers
p/n: 20-1220-88
This Glovebox or Fuel Tank Filler Door Bumper pair is a quality reproduction of the original factory part. This push on rubber bumper attaches to support / cushion the glovebox or filler door closure.
Body Hole Plug
p/n: 20-1041-21
Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one seven eighths (1-7/8) inch in diameter.
Clutch or Brake Pedal Bumper
p/n: 20-1051-24
This Clutch or Brake Pedal Bumper is designed from the original part for superior fitment, finish and function. This bumper is commonly used as a clutch or brake pedal arm stop cushion.
Standard Bumper
p/n: 20-0001-88
This Standard Bumper pair is designed from the original part for superior fitment and function. This rubber bumper fits ashtray or glovebox doors.