Search for Parts
loading...

Fender & Fender Skirt Edging

These are general parts categories. To narrow your search, please use the "Search for Parts" box.
Fender dust seal

p/n: 70-0376-45

Dust seals, rear fender at rear door, right and left.

$170.10/pr.
Made to Order Takes 1-2 Days
Rumbleseat step pad

p/n: 40-0412-44

Step pad, rumbleseat upper, with "P" logo. Fully molded with core and mounting stud.Height: .625 inches.

$132.60/ea.
Made to Order Takes 2-3 Days
Rumbleseat step pad

p/n: 25-0018-44

Step, rumbleseat fender with molded-in studs.Length: 6.375 inches.

$119.60/ea.
Made to Order Takes 2-3 Days
Body to fender seal

p/n: 60-0001-45

Anti-squeak, front body-to fender, right and left.Length: 22.0 inches.

$112.00/pr.
In Stock
Front fender cushion strip

p/n: 16-0003-44

Cushion strip, front fender to runningboard, close reproduction.Length: 17.75 inches.

$100.50/pr.
Made to Order Takes 1-2 Days
Front apron crossbar grommet

p/n: 70-1131-45

Grommets, front splash apron crossbar.Width: 3.5 inches. Height: 3.5 inches.

$93.00/pr.
Made to Order Takes 1-2 Days
Front apron crossbar grommet

p/n: 70-1130-45

Grommets, front splash apron crossbar.Width: 3.5 inches. Height: 3.6875 inches.

$91.70/pr.
Made to Order Takes 1-2 Days
Runningboard edge seal

p/n: 20-0482-45

Seal, runningboard to rear quarter panel special.

$87.90/pr.
Ships in 3-4 Days
Crown molding mounting pad

p/n: 50-0244-44

Mounting pads, rear fender crown molding. Requires two (2) per car.Length: 40.625 inches.

$84.90/pr.
Made to Order Takes 1-2 Days
Front fender seal

p/n: 30-0189-44

Liners, front fender to runningboard. Reversible right and left like originalLength: 15.0 inches.

$84.90/pr.
Made to Order Takes 1-2 Days
Fender to radiator seal

p/n: 40-0085-44

Anti-squeak or welt radiator shell to fender.Length: 11.25 inches.

$84.40/pr.
Made to Order Takes 1-2 Days
Front fender seal

p/n: 30-0264-44

Liner, front fender to runningboard. Reversible right and left replacement.Length: 15.50 inches.

$81.70/pr.
Made to Order Takes 1-2 Days
Front apron crossbar grommet

p/n: 30-0040-44

Grommets, front apron crossbar. Molded left and right just like original.Length: 3.625 inches. Width: 3.625 inches.

$74.40/pr.
Made to Order Takes 1-2 Days
Rumbleseat step pad

p/n: 40-0124-44

Pad, rumbleseat step, with "Dodge" logo, slip over type to fit old steel core. Perfect detail and lettering.Height: .50 inches.

$72.80/ea.
Made to Order Takes 1-2 Days
Trunk rack mounting pad

p/n: 40-0325-44

Grommet (mounting pad), rear, trunk rack to apron.Length: 6.0 inches.

$70.60/pr.
Made to Order Takes 1-2 Days
Rumbleseat step pad

p/n: 40-0012-44

Pad, rumbleseat step bears Chrysler medallion logo in center.Height: .50 inches.

$66.70/ea.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$66.20/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$66.20/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$66.20/ea.
In Stock
Fenderskirt edge seal

p/n: 70-0897-44

Seal, fender skirt edge.Length: 60.0 inches. Width: .625 inches.

$65.90/pr.
In Stock