Search Results

37 items found matching 1949 in Hood Bumpers & Fittings
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Firewall grommet

p/n: 30-0110-42

Grommets, hood lock link through firewall.

$63.60/pr.
In Stock
Hood fastener seal plate

p/n: 50-0225-42

Seal plate, hood fastener control, cable through firewall. Rubber with brass core.

$58.00/ea.
In Stock
Hood bumper

p/n: 70-0409-42

Bumpers, hood top panel at cowl. One half (1/2) inch by one half (1/2) inch by three and one fourth (3-1/4) inch. Held in place by screws. Two (2) to four (4) per car as required.

$48.30/pr.
In Stock
Hood bumper

p/n: 70-0543-42

Bumpers, hood to fender. Mounted on hood, rubber with steel core. Replaces Bakelite originals which are not available.

$44.30/pr.
In Stock
Hood to cowl weatherstrip

p/n: 30-0233-42

Seal, hood to cowl. High quality closed cell sponge rubber construction as original.Width: .4375 inches. Height: .5625 inches.

$33.40/ea.
In Stock
Hood Rest Pad

p/n: 30-0092-42

Hood Rest Pad. Molded rubber with a steel core. Six (6) required per car. Length: 1.75 inches Width: 1.625 inches.

$29.20/ea.
In Stock
Hood rest roller

p/n: 70-0196-42

Roller, hood rear center rest.

$21.30/ea.
In Stock
Hood to cowl weatherstrip

p/n: 20-0539-42

Lacing, hood cowl.

$21.30/ea.
In Stock
Hood bumper kit

p/n: 33-0680-42

Hood bumper set. Kit includes two (2) each of our #33-0123-42 bumpers and six (6) each of our #33-0459-42 bumpers.

$20.90/set
In Stock
Hood rest pad

p/n: 12-0008-42

Pad, hood rest, front, metal core with non-spring tabs, otherwise as original, six (6) per car.

$20.10/ea.
In Stock
Hood support rod top cap

p/n: 40-0103-42

Top cap, hood support rod. For seven sixteenths (7/16) inch diameter rod. Also see our #40-0346-42.Length: 1.0 inches.

$18.00/ea.
In Stock
Hood support rod top cap

p/n: 40-0346-42

Pad, hood rest rod. For five sixteenths (5/16) inch diameter hood support rod. Also see our #40-0103-42.Length: 1.0 inches.

$18.00/ea.
In Stock
Hood bumper kit

p/n: 20-0446-42

Bumper kit, hood.

$17.10/set
In Stock
Hood bumper kit

p/n: 20-2501-42

Bumper kit, hood.

$17.10/set
In Stock
Hood to cowl filler

p/n: 20-2500-42

Seal, top outside corners of cowl to hood. Includes left and right side.

$17.10/pr.
In Stock
Hood bumper

p/n: 50-0159-42

Bumper, hood ledge corner at shroud.Width: 1.25 inches. Height: .5 inches.

$15.30/ea.
In Stock
Folding seat bumper

p/n: 34-0004-88

Bumper, folding seat rest. Also used as hood pad. Original configuration, with fabric base and molding screw hole to fit #10-32 screw.

$14.50/ea.
In Stock
Hood rest pad

p/n: 70-0139-42

Pad, hood rest (hood bumper). In years 1941-47 purchase six (6) per car. In year 1948-1949 purchase two (2) per car.

$14.20/ea.
In Stock
Front bumper gravel shield

p/n: 70-0127-30

Gravel shield, front bumper, anti-rattle.

$13.10/ea.
In Stock
Hood bumper

p/n: 34-0311-42

Bumper, hood, fastened to cowl at rear of hood. Steel core. One and eleven sixteenths (1-11/16) inch diameter. Two (2) per car.

$12.00/ea.
In Stock
Hood bumper

p/n: 34-0157-42

Bumper, hood to radiator grille frame. Four (4) per car, normally.

$10.10/ea.
In Stock
Hood bumper

p/n: 50-0158-42

Bumper, hood in fender flange.Width: 1.0 inches. Height: 1.5 inches.

$9.60/ea.
In Stock
Hood bumper

p/n: 70-0935-42

Bumper assembly, seven eighths (7/8) inch diameter by three eighths (3/8) inch bumper on 1/4-20 stud.Height: 1.50 inches.

$9.40/ea.
In Stock
Door bumper

p/n: 34-0025-42

Bumper, front and rear body hinge pillar, one (1) inch diameter by one fourth (1/4) inch thick, held by screw, steel core. Auxiliary, used only where needed to prevent door rattle.Note: also used on 1942-50 Packards with Clipper styling near t

$7.90/ea.
In Stock
Hood side bumper

p/n: 70-2617-42

Bumper, hood side upper. Fully molded, authentic configuration for 1/4" hole. Six (6) typically required per vehicle. Note: This part is included in our 90-0213-90 Body Bumper

$6.30/ea.
In Stock
Radiator panel bumper

p/n: 33-0189-31

Bumper, lower radiator panel to grille, four (4) per car. Also used on radiator valance, two (2) per car in year 1941 only. Compare with our #33-0211-31. Also used as a bumper, hood tip panel to grille. Use 10 per car for 1939-1940 models. Use 8 per car

$5.90/ea.
In Stock
Hood bumper

p/n: 50-0468-42

Bumper, hood side to fender. Six (6) required per car.Width: 1.8125 inches. Height: 1.8125 inches.

$5.00/ea.
In Stock
Hood bumper

p/n: 33-0542-42

Pad, hood side to fender. Button type, fits five sixteenths (5/16) inch hole, self retaining.

$4.50/ea.
In Stock
Hood bumper

p/n: 33-0113-42

Pad, hood front to grill. Button type, self retaining.

$4.10/ea.
In Stock
Hood rest pad

p/n: 33-0116-42

Pad, hood rest across cowl. Button style with self retainer. Eleven (11) required per car.

$3.50/ea.
In Stock
Hood bumper

p/n: 70-0294-42

Bumper, hood rest, cap type for adjustable screw, fifteenth sixteenths (15/16) inch, seven sixteenths (7/16) inch thick.

$3.00/ea.
In Stock
Hood & Door bumper

p/n: 33-0459-42

Bumper, hood to cowl and door hinge pillar upper. May be used in both places.

$2.90/ea.
In Stock
Hood bumper

p/n: 33-0046-42

Bumper, hood front in grille.

$2.60/ea.
In Stock
Hood bumper

p/n: 33-0427-42

Bumper, hood panel to fender.

$2.60/ea.
In Stock
Hood rest pad

p/n: 33-0123-42

Pad, hood rest, front, to radiator header bar (top of grille).

$2.60/ea.
In Stock
Trunk or hood bumper

p/n: 34-0203-42

Bumper, trunk or hood. Molded with clearance for screw. Used for: Buick 1942-50 Bumper for trunk. Chevrolet 1949-55 Bumper for rear hood corners on cowl. Chevrolet 1949-50 Bumper for trunk. Oldsmobile 1938 Bumper under hood corner on radi

$2.60/ea.
In Stock
Hood Bumper

p/n: 33-0003-42

Bumper, hood, 2 uses. Hood to radiator shell at side panel, Hood to fender, as required. Up to ten (10) required per car.Buick requires six (6) per car.

$2.40/ea.
In Stock