Search Results

265 items found matching 1930
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Side window run channel

p/n: 70-1168-58

Channel, side window, pre-flocked, five sixteenths (5/16) inch wide base for one fourth (1/4) inch glass. Most Fisher closed bodies except those using stainless beaded channel. For nine sixteenths (9/16) inch wide channel, see our #70-1169-58.

$9.80/ft.
In Stock
Side window run channel

p/n: 70-1169-58

Channel, side window, pre-flocked, nine sixteenths (9/16) inch wide to accommodate metal frame side window.

$9.70/ft.
In Stock
Door Bumper

p/n: 70-1156-71

Pad, door side bumper. Clip retained. Appears identical to Atwood #107, #208.Width: 1.5 inches. Height: 1.3125 inches.

$9.40/ea.
In Stock
Door bumper

p/n: 70-1155-71

Pad, door jamb (door side bumper).Length: 1.25 inches. Width: .9375 inches.

$9.40/ea.
In Stock
Door bumper

p/n: 70-1160-71

Pad, door jamb (door side bumper).Length: 1.1875 inches.

$9.10/ea.
In Stock
Fabric hood lacing

p/n: 70-2221-42

Lacing, hood, fabric, webbing anti-squeak. DOES NOT have hollow center. Fasten with rivets if so found originally. Excellent quality.

$8.10/ft.
In Stock
Fabric hood lacing

p/n: 60-0578-42

Lacing, hood, fabric, webbing anti-squeak. With hollow center to receive wire if needed, or fasten with rivets if so found originally. Excellent quality. Seven eighths (7/8) inch by one eighths (1/8) inch thick.

$8.10/ft.
In Stock
Door bumper

p/n: 34-0025-42

Bumper, front and rear body hinge pillar, one (1) inch diameter by one fourth (1/4) inch thick, held by screw, steel core. Auxiliary, used only where needed to prevent door rattle.Note: also used on 1942-50 Packards with Clipper styling near t

$7.90/ea.
In Stock
Side window stop bumper

p/n: 70-0110-62

Pad, side window lower rest. Two (2) per window.

$7.90/ea.
In Stock
Door alignment pad

p/n: 60-0060-71

Wedge pad, door aligning dovetail. Goes under bumper retainer.Length: .9375 inches. Width: .9375 inches. Height: .4375 inches.

$7.80/ea.
In Stock
Door bumper

p/n: 60-0032-71

Pad, door jamb. One (1) per door.Length: 1.25 inches. Width: .75 inches. Height: .875 inches.

$7.70/ea.
In Stock
Door check link rod end stop

p/n: 70-0384-70

Rubber washer, door check link stop.

$7.70/ea.
In Stock
Headlight stanchion pad

p/n: 70-0323-14

Pad, for base of headlight stanchion tube.

$7.60/ea.
In Stock
Hood bumper

p/n: 60-0035-42

Bumper, hood latch bracket.Width: .625 inches. Height: .5625 inches.

$7.30/ea.
In Stock
Side window roller

p/n: 70-0117-62

Anti-rattle roller, side windows. Rubber only, replaces original perfectly and easily. Fits both styles of brackets.

$7.30/ea.
In Stock
Windshield weatherstrip

p/n: 19-0004-52

Weatherstrip, windshield.Width: 1.1875 inches.

$7.30/ft.
In Stock
Side roof rail weatherstrip

p/n: 70-0060-65

Weatherstrip, side roof rail. Made from dense rubber extrusion.Width: 1.0 inches. Height: .6875 inches.

$7.20/ft.
In Stock
Spark plug grommet

p/n: 70-1181-21

Grommet, spark plug and coil wire at distributor cap outlets. For seven (7mm) millimeter, later years.

$7.20/ea.
In Stock
Door handle grommet

p/n: 70-0009-69

Grommet, for outside door handle ferrule (our #70-0111-69, ordered separately). Molded rubber with cloth covering per original.

$7.00/ea.
In Stock
Motor Mount

p/n: 70-0324-11

Front motor mount support bolt cushion.

$6.90/ea.
In Stock
Spare wheel carrier grommet

p/n: 32-0040-37

Grommet, spare wheel brace for sidemount wheels, at runningboard apron, four (4) per car. Sheet Metal Hole: 1-1/2" Center Hole: 1/2" Outside Diameter: 1-13/16" Slot Width: 1/16"

$6.90/ea.
In Stock
Door bumper

p/n: 30-0312-71

Pad, door jamb. Usually requires two (2) per door.Length: 1.0 inches. Width: 1.0 inches. Height: .50 inches.

$6.80/ea.
In Stock
Hood bumper

p/n: 60-0034-42

Bumper stop, hood, lower center. Two (2) required per vehicle.Length: 1.0 inches. Width: .75 inches. Height: .4375 inches.

$6.80/ea.
In Stock
Leaf spring eye seal

p/n: 27-0059-35

Seal or cover, leaf spring eye or shackle bolt end.

$6.80/ea.
In Stock
Rear spring thrust washer

p/n: 40-0526-32

Thrust washer, rear spring. "Silent Block". Three sixteenths (3/16) inch thick. Seven eighths (7/8) inch by one and five eighths (1-5/8).

$6.80/ea.
In Stock
Spark plug grommet

p/n: 70-1180-21

Grommet, spark plug & coil wire at distributor cap outlets. For nine (9mm) millimeter wire, earlier years.

$6.80/ea.
In Stock
Door bumper

p/n: 20-2243-71

Bumper, door jam.

$6.60/ea.
Ships in 3-4 Days
Rear spring thrust washer

p/n: 40-0525-32

Thrust washer, rear spring. "Silent Block". Three sixteenths (3/16) inch thick. One (1) inch by one and three fourths (1-3/4) inch.

$6.40/ea.
In Stock
Universal Mounting Pad

p/n: 70-0019-52

Pad, universal mounting, two and one eighths (2-1/8) inches wide. Heavy rubbery pad with half round (3/16) inch bead for windshield frame mounting to cowl on open cars. Black rubber.

$6.30/ft.
In Stock
Side roof rail weatherstrip

p/n: 70-0081-67

Weatherstrip, side window.Length: 1.4375 inches. Width: .625 inches.

$6.20/ft.
In Stock
Door check link rod end stop

p/n: 70-0325-70

Pad, door check link. For rod type door check. One (1) inch diameter by three eighths (3/8) inch thick with five sixteenths (5/16) inch hole.

$6.10/ea.
In Stock
Pressure ring

p/n: 70-0261-69

Pressure ring (washer), sponge rubber, interior door handle and window regulator escutcheon. One and three fourths (1-3/4) inches outside diameter by three eighths (3/8) inch thick.

$5.90/ea.
In Stock
Shock absorber arm bushing

p/n: 60-0106-32

Bushing, shock absorber arm link.

$5.90/ea.
In Stock
Channel filler weatherstrip

p/n: 70-0075-57

Channel pad, window carrier, incorporating weatherstrip. Used for some side window lower channel.Width: .375 inches. Height: .6875 inches.

$5.80/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Channel filler weatherstrip

p/n: 30-0154-57

Filler, for glass channel for convertible type windows with metal frame around one fourth (1/4) inch glass.Width: .4375 inches. Height: .50 inches.

$5.40/ft.
In Stock
Channel filler weatherstrip

p/n: 70-0241-57

Weatherstrip, side window, double-lip seal type, used as filler for one fourth (1/4) inch glass in metal carrier channel.Width: .375 inches. Height: .

$5.40/ft.
In Stock
Side roof rail weatherstrip

p/n: 11-0010-57

Weatherstrip, side window, (possibly used on other coachwork). Exact copy of original, top quality, fine detail. Murphy-bodied Duesenberg Convertibles.

$5.40/ft.
In Stock
Side Window Upper Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 40-0280-57

Side window weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.30/ft.
In Stock
Firewall grommet

p/n: 32-0422-20

Grommet, firewall, speedometer cable through firewall. Two (2) used per car. Sheet Metal Hole: 1-3/16" Center Hole: 1/2" Outside Diameter: 1-7/16" Slot Width: 1/4"

$5.20/ea.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Firewall grommet

p/n: 32-0001-37

Grommet, firewall and spare wheel sidemount. Sheet Metal Hole: 1-1/8" Center Hole: 3/4" Outside Diameter: 1-9/16" Slot Width: 1/16"

$4.60/ea.
In Stock
Headlight grommet

p/n: 32-0039-14

Grommet, headlight and horn conduit through fender, made to clear nut on end of conduit. Three (3) per car. Sheet Metal Hole: 15/16" Center Hole: 1/4" Outside Diameter: 1-1/4" Slot Width: 1/16"

$4.50/ea.
In Stock
Hood latch swivel pad

p/n: 34-0408-42

Pad, hood latch swivel for hood latch pressure against hood corners. For screw or rivet.

$4.50/ea.
In Stock
Firewall grommet

p/n: 32-0134-20

Special grommet with wide spacing for frame metal to pass electrical wiring and cables through frame. Sheet Metal Hole: 1-1/16" Center Hole: 13/16" Outside Diameter: 1-5/16" Slot Width: 5/32"

$4.30/ea.
In Stock
Fuel line grommet

p/n: 32-0714-41

Grommet, fuel line and other uses through firewall. Sheet Metal Hole: 1" Center Hole: 3/8" Outside Diameter: 1-5/16" Slot Width: 1/16"

$4.30/ea.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Clutch release bearing grommet

p/n: 32-0342-24

Grommet, clutch release bearing grease tube through side of bell housing. Sheet Metal Hole: 3/4" Center Hole: 3/8" Outside Diameter: 1" Slot Width: 3/16"

$4.20/ea.
In Stock
Filler and cushion strip

p/n: 70-1237-48

Filler and cushion strip, many applications. Five thirty seconds (5/32) inch by one and five eighths (1-5/8) inch.

$4.20/ft.
In Stock
Filler and cushion strip

p/n: 70-1236-48

Filler and cushion strip, many applications. One sixteenth (1/16) inch by one and three eighths (1-3/8) inch.

$4.00/ft.
In Stock
Headlight Grommet

p/n: 32-2004-14

Grommet, headlight wire conduit through radiator shell.

$4.00/ea.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Firewall grommet

p/n: 32-0133-21

Special grommet with wide spacing for frame metal, to pass electrical wiring and cables through frame. Sheet Metal Hole: 31/32" Center Hole: 3/4" Outside Diameter: 1-3/16" Slot Width: 3/16"

$3.90/ea.
In Stock
Windshield weatherstrip

p/n: 19-0024-52

Weatherstrip, windshield, largest type of T-rubber, one and one half (1-1/2) inch high.

$3.49/ft.
In Stock
Windshield weatherstrip

p/n: 19-0023-73

Weatherstrip, windshield, T-rubber, short style. Seven sixteenths (7/16) inch high.Height: .4375 inches.

$3.49/ft.
In Stock
Windshield weatherstrip

p/n: 70-1163-52

Weatherstrip, T-rubber, one (1) inch long with one quarter (1/4) inch top. Numerous applications for windshields.Width: 1.0 inches.

$3.49/ft.
In Stock
Windshield weatherstrip

p/n: 70-0142-52

Weatherstrip, T-rubber, windshield. Three fourth (3/4) inch size, top width is approximately one fourth (1/4) inch.Width: .75 inches.

$3.49/ft.
In Stock
Side window weatherstrip

p/n: 70-0079-58

Weatherstrip, side window lower edge, retained in metal flap on side of carrier channel, seals out water when window is cranked up.Width: .375 inches.

$3.40/ft.
In Stock
Side window weatherstrip

p/n: 70-0064-57

Seal, lower side window. Fastens to inner face of door to seal against outer side of glass. Also used as weatherstrip on crank-up windshield tops.

$3.40/ft.
In Stock
Wiring grommet

p/n: 32-0047-14

Grommet, electric wire through body for head and taillights. Sheet Metal Hole: 11/16" Center Hole: 3/8" Outside Diameter: 1" Slot Width: 1/16"

$3.40/ea.
In Stock
Convertible rail grommet

p/n: 32-0132-67

Grommet, upper side rail, for styles with removable rails. Sheet Metal Hole: 1/2" Center Hole: 3/8" Outside Diameter: 13/16" Slot Width: 3/32"

$3.20/ea.
In Stock
Inner side window bumper

p/n: 70-0775-62

Bumper, inner side window garnish molding. One (1) per door.Length: 1.0 inches. Width: .3125 inches. Height: .25 inches.

$3.00/ea.
In Stock
Trunk or hood bumper

p/n: 34-0203-42

Bumper, trunk or hood. Molded with clearance for screw. Used for: Buick 1942-50 Bumper for trunk. Chevrolet 1949-55 Bumper for rear hood corners on cowl. Chevrolet 1949-50 Bumper for trunk. Oldsmobile 1938 Bumper under hood corner on radi

$2.60/ea.
In Stock
Standard bumper

p/n: 33-0136-42

Bumper, standard. See detail page for specific usage.

$2.50/ea.
In Stock