Please click on the part name in red in order to get a complete description.
Filler strip, radiator brace rods. Retains ignition wire and thermometer tube in hollow brace rods. Thirty (30) inch strips.
Pads, brake and clutch pedal, slip over type. Black and red rubber. For black only see our #30-0188-22.Length: 3.875 inches. Width: 2.875 inches.
Insulator, steering column bracket. Two (2) pieces of extruded rubber like original.Width: 1.3125 inches.
Pad, rumbleseat step, with "DS" logo. Fits old bracket and bezel. See our #40-0055-44 also.Height: .50 inches.
Pad, brake and clutch pedal. See also our #40-0072-22.Length: 3.8125 inches. Width: 2.3125 inches.
Pad, rumbleseat step slip over style for original core, "DB" logo.
Grommet, steering column clamp at dash, one and three fourths (1-3/4)inch wide for one and three fourths (1-3/4)inch column.Length: 6.125 inches.
Bumper, rear spring. Fits original retainer.Width: 2.5625 inches.
Gasket, cowl side ventilator. One eighth (1/8) inch sponge rubber.Length: 11.375 inches. Width: 4.625 inches.
Heel pad for carpet. Identical to original. Five and three fourths (5-3/4) inch by ten and one half (10-1/2) inch, to be stitched in place.Length: 10.
Pads, brake and clutch pedal, slip over type. Black rubber only. For black and red (semi-automatic clutch models) see our #30-0188-89.Length: 3.875 inches.
Accelerator pedal pad manufactured in Brown rubber. Full slip-over type and a perfect copy.
Weatherstrip, lower windshield. Four (4) foot strip.
Grommet, headlight bar to shell. One and one fourth (1-1/4) inch round hole.
Pad, brake and clutch pedals. Horizontal oval style, slip over type.Length: 3.8125 inches. Width: 2.375 inches.
Grommet, steering column floor, black rubber only, excellent copy of original.Length: 5.0 inches.
Weatherstrip or rubber buffer, rumbleseat opening notch-out on perimeter of opening near water catch rail. Two (2) used per car.
Cover, rear apron over fuel tank. 3-1/2 inch diameter hollow cup to cover hole above fuel gauge sending unit.
Cover seal, vacuum brake valve operating rod.
Grommet, steering column at floor.
This rear window gasket weatherstrip comes in a seven foot, three inch (7' 3") strip and mounts around the full perimeter of the back glass. The ends may require trimming and bonding for installation.
Pad, spare wheel standoff post at cowl.
Seal or Cushion, gearshift to floorboard.Length: 12.75 inches.
Accelerator pedal pad manufactured in Black rubber. Full slip-over type and a perfect copy. For Brown see our #50-0080-89.
Weatherstrip, stationary quarter windows. Eight (8) foot strip for two (2) quarter windows. Most models with stationary windows.Length: 96.0 inches.
Grommet, fuel filler neck. 2-5/8" inside diameter. Fits 3-3/8" hole in sheet metal. Overall width 4-1/8".
Pads, hood corners. Square type, brass core. Integral installation tabs. 90 degree angle, used on front or rear corners, as required.
Weatherstrip, fixed back and quarter windows, plain type. Seven and one half (7-1/2) foot strip.Length: 90.0 inches. Width: .5625 inches. Height: .
Bumper, front spring. Fits onto original bracket.Length: 2..125 inches. Width: 2.0 inches. Height: 1.875 inches.
Grommet, side carrier brace rod.
Pad, rumbleseat step, with "P" logo, fully detailed slipover pad for old core. Fits original trim ring.Height: .50 inches.
Cover, brake master cylinder filler and inspection hole. Metal core as original.
Pad, accelerator pedal. Cements and fastens with screws to original metal pedal.Length: 6.50 inches.
Weatherstrip, cowl vent. Top quality sponge rubber.
Mount, transmission. Original pattern, superior workmanship.
Anti-rattle, spare wheel cover in fenderwell.Width: .25 inches.
Grommet, steering column at floor. One and one half (1-1/2) inch tube.
Gaskets, parking light (fender light).Length: 2.75 inches. Width: 1.75 inches.
Grommet, firewall pass through, rectangular. Large type. Also see our #40-0523-21 for smaller type if needed.
Sleeve, coil wire to distributor. Fluted to match upper water hoses rubber only. V-12 & V-16 with coils mounted in radiator, V-8 with coils mounted horizontally on brace rods.
Bumper, front spring to frame. Two (2) required per vehicle.
Grommet, fuel filler neck. Oblong, fully molded rubber. Four and one eighth inch (4-1/8") outside length by two and one fourth inch (2-1/4") inside diameter.
Bumper, fender to hood. Two (2) per car. Held by four (4) rivets.Length: 2.9375 inches.
Dust boot, gearshift, beehive type. Excellent copy and material. Used on some shift ball sockets.Length: 4.75 inches.
Mounting pads, horn and headlight stanchion base to hood latch shelf. Two and one half (2-1/2) inches by four and one fourth (4-1/4) inches.Length: 4.
Pad, rumbleseat step plate mounting, rectangle type for top of fender.Length: 4.875 inches. Width: 4.25 inches.
Gaskets, taillight mounting under fender wire conduit base.Width: 3.25 inches.
Pad, rumbleseat step, on rear bumper bracket or fender. Rubber cover only, full slip-over type with bowtie emblem.
Dust cover, gearshift lever. Elbow type.
Cushion, sidemount clamp. Two and one eighth (2-1/8) inch by four and five eighths (4-5/8) inch.Length: 4.625 inches. Width: 2.125 inches.
Mounting pad, engine. Original pattern, superior workmanship.Qty Required:2 Height: 1.875 inches.
Pad, starter pedal, snap over cover with tread pattern matching other pedals.Length: 2.25 inches.
Dust cover, gearshift lever.
Bumper, trunk lid, rubber. Retained by two (2) screws (not included).Width: 2.50 inches. Height: 1.625 inches.
Inner Fender Seal for anti-rattle, runningboard apron to body, or fender splash panels. Nine sixteenths (9/16) inch by seven eighths (7/8) inch slotted sponge rubber to accept rivets. Sold in eight (8) foot strips.
Headlight tube flange gasket. Two (2) per car. Replaces #1234556.
This golf bag door weatherstrip is designed from the original part for superior fitment and seal. This seal mounts directly to the golf bag door.
Grommet, firewall, 6-hole type.Length: 5.0 inches.
Bushing, rear spring front eye, inlox cartridge type as original.
Grommet, fuel gauge and gas line through rear frame cross member. For five eighths (5/8) inch by two and three eighths (2-3/8) inch slot.Length: 2.
Grommet, steering column at floor.Length: 3.375 inches.
Pad, body mounting, for body bracket. Two (2) collars and retaining rings. Four (4) per car.
Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For
Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.
Pad, starter pedal. Original pattern. Round style.
Body bumpers, rear, at body hold-down bolt. Fully molded rubber. Comes as a pair of two (2). One and three fourths inch (1 3/4") outside length by one and one fourth inch (1 1/4") diameter by three eighths inch (3/8") inside hole diameter.
Pads, brake and clutch pedals. One and seven eighths (1-7/8) inch by four (4) inch overall. Excellent detail with bowtie emblem like original.
Gasket, cowl vent. Sponge rubber, good copy of original. Thirty seven and one half (37-1/2) inch developed length.Length: 37.50 inches.
Cover, starter cable terminal post inside to frame. Full detail and molded as original part.
Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f
Bumper pad, rumbleseat lid, upper corners. Compare with our #70-0120-87.Width: 1.0 inches. Height: 1.125 inches.
Seal, brake and clutch pedal shank to floorboard. Single bellows rubber cup, seals air drafts around pedals.
Grommets, horn wire exit from horn motor cover.
Bumper, inclined toe board pedal hole, carried on toe board to meet our #30-0055-24 pedal. dust cover.
Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.
Grommet, firewall. For coil wire and temperature gauge line. Excellent workmanship and correct design.Height: 1.0 inches.
Seal, brake and clutch pedal shank to floorboard. One and one half (1-1/2) inch by two and one eighth (2-1/8) inch by three fourths (3/4) inch thick.
Grommet for trumpet horn wire through motor cover. Close reproduction. Two (2) per car.
Pad, fender well for sidemounted spares. One (1) pair per fender.Length: 2.875 inches. Width: 2.875 inches. Height: .4375 inches.
Seals, brake and clutch pedal shanks, against underside of floorboard.Length: 2.5625 inches. Width: 1.75 inches.
Bushing, headlight to badge bar.
Headlight bracket-to-fender pad. POA #1245890-1, right and left.
Pad, luggage rack to rear apron.
Side Window vertical run channel that is flexible, felt lined and rubber covered. Pair of thirty (30") inch strips. A replacement for listed vehicles but can be used in many applications.
Pad, body mounting. Three eighths (3/8) inch by two (2) inch by three (3) inch with collar and retainer ring.
Cushion, horn blowing button.Height: 1.0 inches.
Pad, rumbleseat lid corner, Compare with our #60-0191-87.Length: .75 inches.
Tape, black bowdrill cloth. Adhesive backed, used to create cloth cover surface for side rail weatherstrips typically. Five (5) inches by five (5) foot roll. Pressure sensitive, for covering convertible side window weatherstrip such as our #70-1170-99 or
Bushing, brake cross shaft bracket.
Grommet, firewall pass through, rectangular. Also see our #40-0522-21 for larger type if needed.
Seal, brake and clutch pedal shank to floorboard (draft excluder).Length: 2.4375 inches. Width: 1.875 inches.
Grommet, water temperature indicator pipe through dash.
Starter button, push on replacement to rod. Two (2) inch outside diameter.
Swivel, hood latch. Exact copy from .075 steel, pierced for rivets, not plated.
Cover, accelerator rod button. Round slip-over type. Good copy with bow tie center.Height: .4375 inches.
Bushing, shock absorber arm. Restore proper shock action.Height: 1.375 inches.
Spacer, steering column to dash at U-clamp.Length: 2.50 inches.
Pad, door jamb, large size, retained by both dovetail retainer from back, and screw through center. Usually 2 per door.Length: 2.125 inches. Width: 1.
Pad, rear spring insulator for two (2) inch wide springs. (see our number 70-0245-32 for two and one fourth (2-1/4) inch springs). Cloth reinforced. Four (4) per vehicle.
Bumper, rumbleseat lid. Sometimes used on trunk. One half (1/2) inch by one (1) inch by one (1) inch. Two (2) per car.Length: 1.0 inches. Width: 1.0 inches.