Search Results

45 items found matching 1931 Dodge Model DG 2 door Convertible
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Accelerator pedal service

p/n: 70-1587-40

Pad, accelerator pedal. Revulcanization service only.

$238.30/ea.
Made to Order Takes 2-3 Days
Door check strap

p/n: 40-0535-70

Strap, door check. T-type, special heavy duty construction of rubber with multiple ply webbing and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.

$165.30/pr.
In Stock
Rumbleseat step pad

p/n: 40-0124-44

Pad, rumbleseat step, with "Dodge" logo, slip over type to fit old steel core. Perfect detail and lettering.Height: .50 inches.

$84.70/ea.
Made to Order Takes 1-2 Days
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Rumbleseat step pad

p/n: 40-0209-44

Pad, rumbleseat step slip over style for original core, "DB" logo.

$68.30/ea.
In Stock
Carpet heel plate

p/n: 40-0087-88

Heel pad for carpet. Identical to original. Five and three fourths (5-3/4) inch by ten and one half (10-1/2) inch, to be stitched in place.Length: 10.

$65.30/ea.
In Stock
Access hole plug

p/n: 10-0010-44

Cover, rear apron over fuel tank. 3-1/2 inch diameter hollow cup to cover hole above fuel gauge sending unit.

$62.80/ea.
In Stock
Hood corner pad

p/n: 40-0128-42

Pads, hood corners. Square type, brass core. Integral installation tabs. 90 degree angle, used on front or rear corners, as required.

$58.60/pr.
In Stock
Fuel neck grommet

p/n: 40-0067-39

Grommet, fuel filler neck. Oblong, fully molded rubber. Four and one eighth inch (4-1/8") outside length by two and one fourth inch (2-1/4") inside diameter.

$51.60/ea.
In Stock
Hood bumper

p/n: 40-0354-42

Bumper, fender to hood. Two (2) per car. Held by four (4) rivets.Length: 2.9375 inches.

$51.60/pr.
In Stock
Side mount clamp cushion

p/n: 40-0138-37

Cushion, sidemount clamp. Two and one eighth (2-1/8) inch by four and five eighths (4-5/8) inch.Length: 4.625 inches. Width: 2.125 inches.

$50.10/ea.
In Stock
Trunk bumper

p/n: 40-0082-85

Bumper, trunk lid, rubber. Retained by two (2) screws (not included).Width: 2.50 inches. Height: 1.625 inches.

$47.60/pr.
Made to Order Takes 1-2 Days
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
Brake and clutch shank seal

p/n: 40-0175-24

Seal, brake and clutch pedal shank to floorboard. One and one half (1-1/2) inch by two and one eighth (2-1/8) inch by three fourths (3/4) inch thick.

$38.20/pr.
In Stock
Horn trumpet grommet

p/n: 40-0086-21

Grommet for trumpet horn wire through motor cover. Close reproduction. Two (2) per car.

$38.10/pr.
Made to Order Takes 1-2 Days
Flexible run channel

p/n: 40-0309-57

Channel, side window glass, vertical run. (Use our #40-0280-57 across top).

$34.60/pr.
In Stock
Brake and clutch shank seal

p/n: 40-0016-24

Seal, brake and clutch pedal shank to floorboard (draft excluder).Length: 2.4375 inches. Width: 1.875 inches.

$29.50/pr.
In Stock
Rumbleseat lid bumper pad

p/n: 40-0297-85

Bumper, rumbleseat lid. Sometimes used on trunk. One half (1/2) inch by one (1) inch by one (1) inch. Two (2) per car.Length: 1.0 inches. Width: 1.0 inches.

$23.50/pr.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Coil wire sleeve

p/n: 40-0336-21

Nipple, sparkplug wire at sparkplug, for right angle plug terminal. This is an exact copy of the style used at the time. Not a modernistic makeover.

$15.80/ea.
In Stock
Door bumper

p/n: 40-0037-70

Pad, door jamb. One and nine sixteenths (1-9/16) inch long by one and one eighth (1-1/8) inch wide.Length: 1.625 inches. Width: 1.0625 inches.

$12.20/ea.
In Stock
Shock and stabilizer bushing

p/n: 50-0220-32

Bushing, for shock absorber link cross pin or stabilizer link cross pin.1931-36 Bushing, rubber, for shock absorber link cross pin, #41151.

$11.90/ea.
In Stock
Door and trunk handle gasket

p/n: 40-0132-70

Pad, door handle escutcheon. Two and five sixteenths (2-5/16) inch by one and seven sixteenths (1-7/16) inch.

$10.90/ea.
In Stock
Door bumper

p/n: 40-0010-70

Pad, door jamb, fully detailed. One and one eighth (1-1/8) inch long, one and one fourth (1-1/4) inch wide.Length: 1.125 inches. Width: 1.25 inches.

$10.60/ea.
In Stock
Door Bumper

p/n: 70-1156-71

Pad, door side bumper. Clip retained. Appears identical to Atwood #107, #208.Width: 1.5 inches. Height: 1.3125 inches.

$9.40/ea.
In Stock
Fabric hood lacing

p/n: 60-0578-42

Lacing, hood, fabric, webbing anti-squeak. With hollow center to receive wire if needed, or fasten with rivets if so found originally. Excellent quality. Seven eighths (7/8) inch by one eighths (1/8) inch thick.

$8.10/ft.
In Stock
Fabric hood lacing

p/n: 70-2221-42

Lacing, hood, fabric, webbing anti-squeak. DOES NOT have hollow center. Fasten with rivets if so found originally. Excellent quality.

$8.10/ft.
In Stock
Frame hole plug

p/n: 35-0166-44

Plug, for holes in right hand frame rail when car is left hand drive. (Frames were punched for both right hand and left hand drive).

$7.40/ea.
In Stock
Rear spring thrust washer

p/n: 40-0526-32

Thrust washer, rear spring. "Silent Block". Three sixteenths (3/16) inch thick. Seven eighths (7/8) inch by one and five eighths (1-5/8).

$6.80/ea.
In Stock
Rear spring thrust washer

p/n: 40-0525-32

Thrust washer, rear spring. "Silent Block". Three sixteenths (3/16) inch thick. One (1) inch by one and three fourths (1-3/4) inch.

$6.40/ea.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
Made to Order Takes 2-3 Days
Channel filler weatherstrip

p/n: 30-0154-57

Filler, for glass channel for convertible type windows with metal frame around one fourth (1/4) inch glass.Width: .4375 inches. Height: .50 inches.

$5.40/ft.
In Stock
Channel filler weatherstrip

p/n: 70-0241-57

Weatherstrip, side window, double-lip seal type, used as filler for one fourth (1/4) inch glass in metal carrier channel.Width: .375 inches. Height: .

$5.40/ft.
In Stock
Side Window Upper Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 40-0280-57

Side window weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.30/ft.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Windshield weatherstrip

p/n: 70-1163-52

Weatherstrip, T-rubber, one (1) inch long with one quarter (1/4) inch top. Numerous applications for windshields.Width: 1.0 inches.

$3.49/ft.
In Stock
Windshield weatherstrip

p/n: 19-0024-52

Weatherstrip, windshield, largest type of T-rubber, one and one half (1-1/2) inch high.

$3.49/ft.
In Stock
Windshield weatherstrip

p/n: 70-0142-52

Weatherstrip, T-rubber, windshield. Three fourth (3/4) inch size, top width is approximately one fourth (1/4) inch.Width: .75 inches.

$3.49/ft.
In Stock