Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

55 items found matching 1932 Chrysler First Series Six CM 4 door Phaeton
Accelerator pedal pad

p/n: 40-0014-40

Accelerator pedal. Perfect copy in every detail, including heavy two (2) piece metal core with mounting tabs as original.Length: 10.3125 inches.

$196.29/ea.
Made to Order Takes 2-3 Days
Door check strap

p/n: 40-0535-70

Strap, door check. T-type, special heavy duty construction of rubber with multiple ply webbing and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.

$170.39/pr.
In Stock
Side mount grommet

p/n: 40-0039-37

Grommets, sidemount.Length: 5.75 inches.

$90.99/pr.
In Stock
Rumbleseat step pad

p/n: 40-0012-44

Pad, rumbleseat step bears Chrysler medallion logo in center.Height: .50 inches.

$80.79/ea.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Brake and clutch pedal pad

p/n: 40-0038-22

Pad, brake and clutch pedal. See also our #40-0072-22.Length: 3.8125 inches. Width: 2.3125 inches.

$71.99/pr.
In Stock
Carpet heel plate

p/n: 40-0087-88

Heel pad for carpet. Identical to original. Five and three fourths (5-3/4) inch by ten and one half (10-1/2) inch, to be stitched in place.Length: 10.

$67.99/ea.
In Stock
Hood corner pad

p/n: 40-0128-42

Pads, hood corners. Square type, brass core. Integral installation tabs. 90 degree angle, used on front or rear corners, as required.

$60.99/pr.
In Stock
Windshield weatherstrip

p/n: 40-0320-52

Seal, windshield. Lower, glass frame to cowl. Approximately four (4) foot strip. Note: for 2 piece windshields

$60.79/ea.
In Stock
Cowl vent gasket

p/n: 40-0170-54

Gasket, cowl vent, high grade sponge for twin cowl vents of thirty four (34) inch circumference.Length: 34.0 inches. Width: .75 inches. Height: .

$56.39/pr.
In Stock
Side mount cover pad

p/n: 40-0314-37

Anti-rattle, spare wheel cover in fenderwell.Width: .25 inches.

$55.99/pr.
In Stock
Firewall grommet

p/n: 40-0393-21

Grommet, firewall pass through. Similar to our #40-0523-21 but different hole pattern.

$55.39/ea.
Made to Order Takes 1-2 Days
Fuel neck grommet

p/n: 40-0067-39

Grommet, fuel filler neck. Oblong, fully molded rubber. Four and one eighth inch (4-1/8") outside length by two and one fourth inch (2-1/4") inside diameter.

$53.79/ea.
Made to Order Takes 1-2 Days
Hood bumper

p/n: 40-0354-42

Bumper, fender to hood. Two (2) per car. Held by four (4) rivets.Length: 2.9375 inches.

$53.79/pr.
Made to Order Takes 1-2 Days
Gearshift boot

p/n: 40-0076-88

Dust boot, gearshift, beehive type. Excellent copy and material. Used on some shift ball sockets.Length: 4.75 inches.

$53.69/ea.
Made to Order Takes 1-2 Days
Gearshift boot

p/n: 40-0074-88

Dust cover, gearshift lever. Elbow type.

$52.19/ea.
Made to Order Takes 1-2 Days
Gearshift boot

p/n: 40-0163-88

Dust cover, gearshift lever.

$51.49/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Brake and clutch shank seal

p/n: 40-0175-24

Seal, brake and clutch pedal shank to floorboard. One and one half (1-1/2) inch by two and one eighth (2-1/8) inch by three fourths (3/4) inch thick.

$41.39/pr.
In Stock
Horn trumpet grommet

p/n: 40-0086-21

Grommet for trumpet horn wire through motor cover. Close reproduction. Two (2) per car.

$41.19/pr.
Made to Order Takes 1-2 Days
Firewall grommet

p/n: 40-0394-21

Grommet, firewall pass through. Three (3) holes for oil, temp, and coil wires.

$37.89/ea.
In Stock
5" Wide Bowdrill Cloth Tape

p/n: 70-1175-65

Bowdrill cloth tape is used for covering convertible side window weatherstrip. Available in a 5 ft roll.

$35.49/ea.
In Stock
Brake and clutch shank seal

p/n: 50-0066-24

Grommet, brake and clutch pedal floor seal.Width: 1.8125 inches. Height: 2.375 inches.

$35.19/pr.
In Stock
Brake and clutch shank seal

p/n: 40-0016-24

Seal, brake and clutch pedal shank to floorboard (draft excluder).Length: 2.4375 inches. Width: 1.875 inches.

$31.99/pr.
In Stock
Taillight mounting pad

p/n: 40-0061-15

Pad, taillight mounting.Chrysler 1932-33 Pad, tail light mounting. Chrysler and other WPC cars. Chrysler 1932-33 Pad, rumbleseat step mounting.

$25.39/ea.
In Stock
Hood bumper

p/n: 70-1507-42

Bumper, hood side panel. Metal core as original, six (6) per car.

$22.59/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$20.39/ea.
In Stock
Coil wire sleeve

p/n: 40-0336-21

Nipple, sparkplug wire at sparkplug, for right angle plug terminal. This is an exact copy of the style used at the time. Not a modernistic makeover.

$17.19/ea.
In Stock
2-1/2" Bowdrill Cloth Tape

p/n: 70-1172-65

Bowdrill cloth tape is used for covering convertible side window weatherstrip. Available in a 5 ft roll.

$16.79/ea.
In Stock
Shock absorber bushing

p/n: 40-0273-32

Bushing. shock absorber link, smaller type. Eight (8) required per car. Compare with our #40-0069-32 (larger type).Length: .9375 inches. Width: .

$16.79/ea.
In Stock
2-1/2" Tan Bowdrill Cloth Tape

p/n: 70-1173-65

Tan bowdrill cloth tape is used for covering convertible side window weatherstrip.

$14.99/ea.
In Stock
Door bumper

p/n: 40-0037-70

Pad, door jamb. One and nine sixteenths (1-9/16) inch long by one and one eighth (1-1/8) inch wide.Length: 1.625 inches. Width: 1.0625 inches.

$13.29/ea.
In Stock
Battery cable grommet

p/n: 40-0322-21

Grommet, battery ground cable through frame.

$13.19/ea.
Made to Order Takes 1-2 Days
Shock and stabilizer bushing

p/n: 50-0220-32

Bushing, for shock absorber link cross pin or stabilizer link cross pin.1931-36 Bushing, rubber, for shock absorber link cross pin, #41151.

$12.99/ea.
In Stock
Battery cable grommet

p/n: 40-0333-21

Grommet, battery hot cable through frame. Three fourths (3/4) inch inside diameter for one and three sixteenths (1-3/16) inch hole through frame.

$11.19/ea.
Made to Order Takes 1-2 Days
1/8" Fabric Hood Lacing

p/n: 60-0578-42

Fabric hood lacing provides anti-squeak functionality. Available by the foot.

$8.79/ft.
In Stock
3/16" Fabric Hood Lacing

p/n: 70-2221-42

Hood lacing provides anti-squeak functionality. Available by the foot.

$8.79/ft.
In Stock
Frame hole plug

p/n: 35-0166-44

Plug, for holes in right hand frame rail when car is left hand drive. (Frames were punched for both right hand and left hand drive).

$7.99/ea.
In Stock
Rear spring thrust washer

p/n: 40-0526-32

Thrust washer, rear spring. "Silent Block". Three sixteenths (3/16) inch thick. Seven eighths (7/8) inch by one and five eighths (1-5/8).

$7.39/ea.
In Stock
Rear spring thrust washer

p/n: 40-0525-32

Thrust washer, rear spring. "Silent Block". Three sixteenths (3/16) inch thick. One (1) inch by one and three fourths (1-3/4) inch.

$6.99/ea.
In Stock
1/4" Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available. Available by the foot.

$6.39/ft.
In Stock
1/2" Channel Filler Weatherstrip

p/n: 30-0154-57

Filler, for glass channel for convertible type windows with metal frame around one fourth (1/4) inch glass. Available by the foot.

$5.89/ft.
In Stock
11/16" Channel Filler Weatherstrip

p/n: 70-0241-57

Weatherstrip, side window, double-lip seal type, used as filler for one fourth (1/4) inch glass in metal carrier channel. Available by the foot.

$5.89/ft.
In Stock
Side Window Upper Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 40-0280-57

Side window weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$5.79/ft.
In Stock
1/16" Cork Sash Channel Filler

p/n: 70-1115-57

Cork sash channel filler. Available by the foot.

$5.19/ft.
In Stock
1/16" Sash Channel Filler

p/n: 70-2170-57

Sash channel filler. Available by the foot.

$4.69/ft.
In Stock