Search Results

50 items found matching 1932 Packard Deluxe Eight 4 door Sedan - 5 Passenger
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Vibration damper service

p/n: 30-0376-12

Vibration damper, crankshaft, front. Revulcanizing service for rubber cushion elements.

$705.30/ea.
Call or Email
Prop shaft support service

p/n: 30-0526-24

Support, drive shaft intermediate bearing retainer. Revulcanization service only.

$610.50/ea.
Call or Email
Windshield weatherstrip

p/n: 30-0206-52

Seal, windshield, lower.Length: 43.50 inches.

$189.10/ea.
Made to Order Takes 1-2 Days
Hood hinge top strap pivot

p/n: 70-0045-42

Pivot, hood hinge top strap. Cold rolled steel as original. Furnished in a four and one half (4-1/2) foot strip long enough for all models.

$169.70/ea.
In Stock
Door check strap

p/n: 40-0535-70

Strap, door check. T-type, special heavy duty construction of rubber with multiple ply webbing and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.

$165.30/pr.
In Stock
Steering Column Grommet

p/n: 30-0046-36

Steering column to toe board grommet. Made with a brass core, like original. For one and one half (1-1/2) inch steering column tube.

$106.50/ea.
In Stock
Axle rebound pad

p/n: 30-0054-32

Pads, rear axle rebound.Length: 5.125 inches. Width: 1.4375 inches.

$104.90/pr.
In Stock
Axle rebound pad

p/n: 30-0043-32

Pads, front axle rebound. Correct shape and design like original.Length: 3.625 inches. Width: 2.125 inches. Height: 2.125 inches.

$102.60/pr.
In Stock
Headlight mounting pad

p/n: 30-0291-14

Pads, headlight support bar to fender. Molded right and left.Length: 3.75 inches. Width: 3.75 inches.

$98.70/pr.
In Stock
Swing-out Windshield Weatherstrip

p/n: 70-0057-52

This swing-out windshield weatherstrip comes in an twelve foot (12') strip and mounts into the metal channel attached to the glass. The rubber slides into the T-groove and creates a seal when the glass is pressed against the body of the vehicle.

$95.40/ea.
In Stock
Side mount grommet

p/n: 30-0324-37

Grommet, side wheel carrier to runningboard splasher, right and left.Width: 2.50 inches. Height: 4.625 inches.

$81.30/pr.
Made to Order Takes 1-2 Days
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Cowl vent gasket

p/n: 30-0097-54

Gaskets, side cowl vent. One fourth (1/4) inch square cross section.

$72.80/pr.
In Stock
Red brake and clutch pedal pad

p/n: 30-0188-89

Pads, brake and clutch pedal, slip over type. Black and red rubber. For black only see our #30-0188-22.Length: 3.875 inches. Width: 2.875 inches.

$71.70/pr.
In Stock
Brake and clutch pedal pad

p/n: 30-0188-22

Pads, brake and clutch pedal, slip over type. Black rubber only. For black and red (semi-automatic clutch models) see our #30-0188-89.Length: 3.875 inches.

$65.20/pr.
In Stock
Window weatherstrip

p/n: 70-0084-77

Weatherstrip, fixed back and quarter windows, plain type. Seven and one half (7-1/2) foot strip.Length: 90.0 inches. Width: .5625 inches. Height: .

$58.40/ea.
In Stock
Parking light mounting pad

p/n: 30-0416-17

Gasket, fender light. Faithful copy with correct shape and detail as originalLength: 2.75 inches.

$52.20/pr.
In Stock
Radiator mounting pad

p/n: 30-0395-31

Spacer or Pad, radiator anchorage stud, upper stud. One (1) pair required per car.Length: 2.5625 inches.

$52.20/pr.
In Stock
Hood rest pad

p/n: 30-0222-42

Pads, hood inner rest center. Rubber only, fits original bracket.Length: 2.0625 inches. Width: .6875 inches.

$50.00/pr.
In Stock
Cowl vent gasket

p/n: 30-0096-54

Gasket, top cowl vent. Closed cell sponge rubber. One half (1/2) inch by three fourths (3/4) inch. Rectangular cross section.

$49.90/ea.
In Stock
Radiator mounting pad

p/n: 30-0209-31

Shim, radiator core mounting stud spacer. Fully molded rubber. Use as required. Comes as a pair of two (2). Two and seven eighths inch (2 7/8") square by five eighths inch (5/8") inside hole diameter by three eighths inch (3/8") height.

$49.40/pr.
Made to Order Takes 1-2 Days
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
Brake and clutch pedal bumper

p/n: 30-0380-20

Bumper, inclined toe board pedal hole, carried on toe board to meet our #30-0055-24 pedal. dust cover.

$40.40/pr.
In Stock
Brake and clutch shank seal

p/n: 30-0055-24

Seals, brake and clutch pedal shanks, against underside of floorboard.Length: 2.5625 inches. Width: 1.75 inches.

$37.40/pr.
In Stock
Radiator mounting pad

p/n: 30-0451-31

Spacer or Pad, lower radiator anchor stud. Used in conjunction with our #30-0395-31.Height: .3125 inches.

$36.60/pr.
In Stock
Taillight mounting pad

p/n: 30-0290-15

Pad, taillight bracket mounting. Proper construction and beading as original.

$36.00/ea.
In Stock
Firewall grommet

p/n: 30-0319-21

Grommet, water temperature coil wire through firewall. Good reproduction of part that always needs replacement when restoring.Height: 1.50 inches.

$31.90/ea.
In Stock
Shock absorber arm bushing

p/n: 30-0192-32

Bushing, shock absorber arm. Restore proper shock action.Height: 1.375 inches.

$24.40/ea.
In Stock
Brake vacuum cylinder rod boot

p/n: 30-0426-24

Boot, brake vacuum control valve.Height: .25 inches.

$24.30/ea.
In Stock
Door bumper

p/n: 30-0152-71

Bumper, door, rubber, round style, screw retained. One and five sixteenths (1-5/16) inch diameter.

$20.40/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Door bumper

p/n: 30-0052-71

Bumper, door side, upper. Oblong type, perfect copy of original.Length: 2.4375 inches.

$18.50/ea.
In Stock
Door bumper

p/n: 30-0002-71

Bumper, door side. One and one fourth (1-1/4) inch by two (2) inch.Length: 2.0 inches. Width: 1.25 inches.

$16.70/ea.
In Stock
Door bumper

p/n: 30-0021-71

Pad, door jamb.Length: 1.50 inches. Width: 1.25 inches.

$14.50/ea.
In Stock
Door bumper

p/n: 30-0032-71

Pad, for door. Circular shape, one and one fourth (1-1/4) inch diameter.

$13.00/ea.
In Stock
Door bumper

p/n: 30-0350-71

Bumper, door dovetail. Goes in door opening, two (2) door, under steel cap in dovetail receiver.Width: 1.125 inches. Height: .9375 inches.

$11.30/pr.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Bijur lubricator spring seal

p/n: 30-0434-32

Seal, spring shackle. For models with Bijur lubrication systems.

$5.30/ea.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Windshield weatherstrip

p/n: 19-0023-73

Weatherstrip, windshield, T-rubber, short style. Seven sixteenths (7/16) inch high.Height: .4375 inches.

$3.49/ft.
In Stock
Bijur lubricator frame grommet

p/n: 32-0414-32

Grommet, Bijur Lubricator delivery tube thru frame at various places. Use as required, up to eight (8) per car. Sheet Metal Hole: 3/8" Center Hole: 5/32" Outside Diameter: 9/16" Slot Width: 5/32"

$2.80/ea.
In Stock
Standard bumper

p/n: 33-0136-42

Bumper, standard. See detail page for specific usage.

$2.50/ea.
In Stock