Search Results

56 items found matching 1932 Packard Light Eight 4 door Sedan
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Vibration damper service

p/n: 30-0376-12

Vibration damper, crankshaft, front. Revulcanizing service for rubber cushion elements.

$705.30/ea.
Call or Email
Prop shaft support service

p/n: 30-0526-24

Support, drive shaft intermediate bearing retainer. Revulcanization service only.

$610.50/ea.
Call or Email
Motor mount service

p/n: 30-0403-11

Insulator, motor mount support, rear. Revulcanization service only.

$519.40/pr.
Call or Email
Motor mount service

p/n: 30-0509-11

Insulator, rear engine support. Revulcanization service only. Found on an original 900, but different from our #30-0403-11.

$493.50/pr.
Call or Email
Motor mount service

p/n: 30-0508-11

Insulator, front engine support. Revulcanization service only. Found on an original 900, but different from our #30-0402-11.

$469.60/pr.
Call or Email
Motor mount service

p/n: 30-0402-11

Insulator, motor mount support. Front right and left. Revulcanization service only.

$305.20/pr.
Call or Email
Windshield weatherstrip

p/n: 30-0206-52

Seal, windshield, lower.Length: 43.50 inches.

$189.10/ea.
Made to Order Takes 1-2 Days
Hood hinge top strap pivot

p/n: 70-0045-42

Pivot, hood hinge top strap. Cold rolled steel as original. Furnished in a four and one half (4-1/2) foot strip long enough for all models.

$169.70/ea.
In Stock
Door check strap

p/n: 40-0535-70

Strap, door check. T-type, special heavy duty construction of rubber with multiple ply webbing and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.

$165.30/pr.
In Stock
Windshield weatherstrip

p/n: 30-0256-52

Weatherstrip, cowl to windshield. Glass frame. Three (3) piece set of right and left molded ends plus center section of soft yielding rubber.

$153.70/set
Made to Order Takes 1-2 Days
Headlight mounting pad set

p/n: 30-0236-14

Pad set, headlight mounting. Six (6) piece replacement set. Sold in complete sets only.

$153.50/set
In Stock
Rear Window Gasket

p/n: 30-0513-81

This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.

$143.80/ea.
Made to Order Takes 2-3 Days
Axle rebound pad

p/n: 30-0054-32

Pads, rear axle rebound.Length: 5.125 inches. Width: 1.4375 inches.

$104.90/pr.
In Stock
Headlight mounting pad

p/n: 30-0291-14

Pads, headlight support bar to fender. Molded right and left.Length: 3.75 inches. Width: 3.75 inches.

$98.70/pr.
In Stock
Swing-out Windshield Weatherstrip

p/n: 70-0057-52

This swing-out windshield weatherstrip comes in an twelve foot (12') strip and mounts into the metal channel attached to the glass. The rubber slides into the T-groove and creates a seal when the glass is pressed against the body of the vehicle.

$95.40/ea.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Cowl vent gasket

p/n: 30-0097-54

Gaskets, side cowl vent. One fourth (1/4) inch square cross section.

$72.80/pr.
In Stock
Red brake and clutch pedal pad

p/n: 30-0188-89

Pads, brake and clutch pedal, slip over type. Black and red rubber. For black only see our #30-0188-22.Length: 3.875 inches. Width: 2.875 inches.

$71.70/pr.
In Stock
Brake and clutch pedal pad

p/n: 30-0188-22

Pads, brake and clutch pedal, slip over type. Black rubber only. For black and red (semi-automatic clutch models) see our #30-0188-89.Length: 3.875 inches.

$65.20/pr.
In Stock
Fuel neck grommet

p/n: 30-0158-41

Grommet, filler neck to body.

$58.90/ea.
In Stock
Window weatherstrip

p/n: 70-0084-77

Weatherstrip, fixed back and quarter windows, plain type. Seven and one half (7-1/2) foot strip.Length: 90.0 inches. Width: .5625 inches. Height: .

$58.40/ea.
In Stock
Radiator mounting pad

p/n: 30-0395-31

Spacer or Pad, radiator anchorage stud, upper stud. One (1) pair required per car.Length: 2.5625 inches.

$52.20/pr.
In Stock
Hood rest pad

p/n: 30-0222-42

Pads, hood inner rest center. Rubber only, fits original bracket.Length: 2.0625 inches. Width: .6875 inches.

$50.00/pr.
In Stock
Cowl vent gasket

p/n: 30-0096-54

Gasket, top cowl vent. Closed cell sponge rubber. One half (1/2) inch by three fourths (3/4) inch. Rectangular cross section.

$49.90/ea.
In Stock
Radiator mounting pad

p/n: 30-0209-31

Shim, radiator core mounting stud spacer. Fully molded rubber. Use as required. Comes as a pair of two (2). Two and seven eighths inch (2 7/8") square by five eighths inch (5/8") inside hole diameter by three eighths inch (3/8") height.

$49.40/pr.
Made to Order Takes 1-2 Days
Front fender center pad

p/n: 30-0237-44

Pad, separator, front fender center joint. Correct shape and form.Length: 3.0 inches. Width: 3.0 inches.

$48.60/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
Brake and clutch pedal bumper

p/n: 30-0380-20

Bumper, inclined toe board pedal hole, carried on toe board to meet our #30-0055-24 pedal. dust cover.

$40.40/pr.
In Stock
Headlight stanchion pad

p/n: 30-0240-14

Cushion (rubber washer), front light to radiator shell. One (1) pair required per car.

$38.00/pr.
Made to Order Takes 1-2 Days
Brake and clutch shank seal

p/n: 30-0055-24

Seals, brake and clutch pedal shanks, against underside of floorboard.Length: 2.5625 inches. Width: 1.75 inches.

$37.40/pr.
In Stock
Radiator mounting pad

p/n: 30-0451-31

Spacer or Pad, lower radiator anchor stud. Used in conjunction with our #30-0395-31.Height: .3125 inches.

$36.60/pr.
In Stock
Spring eye bushing

p/n: 30-0081-32

Bushing, spring eye leaf, rear of front spring; or front of rear spring.

$33.00/ea.
In Stock
Firewall grommet

p/n: 30-0319-21

Grommet, water temperature coil wire through firewall. Good reproduction of part that always needs replacement when restoring.Height: 1.50 inches.

$31.90/ea.
In Stock
Taillight gasket

p/n: 30-0523-15

Gasket, taillight door. Two (2) strips twelve (12) inches long.Length: 12.0 inches. Width: .25 inches.

$29.70/pr.
In Stock
Spring shackle bushing

p/n: 30-0076-32

Bushing, spring shackle, front spring, front end; or rear spring, rear end. Two and one eighth (2-1/8) inch long. Sixteen (16) required per car.

$23.40/ea.
In Stock
Door bumper

p/n: 30-0152-71

Bumper, door, rubber, round style, screw retained. One and five sixteenths (1-5/16) inch diameter.

$20.40/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Door bumper

p/n: 30-0052-71

Bumper, door side, upper. Oblong type, perfect copy of original.Length: 2.4375 inches.

$18.50/ea.
In Stock
Door bumper

p/n: 30-0002-71

Bumper, door side. One and one fourth (1-1/4) inch by two (2) inch.Length: 2.0 inches. Width: 1.25 inches.

$16.70/ea.
In Stock
Door bumper

p/n: 30-0021-71

Pad, door jamb.Length: 1.50 inches. Width: 1.25 inches.

$14.50/ea.
In Stock
Door bumper

p/n: 30-0032-71

Pad, for door. Circular shape, one and one fourth (1-1/4) inch diameter.

$13.00/ea.
In Stock
Shock and stabilizer bushing

p/n: 50-0220-32

Bushing, for shock absorber link cross pin or stabilizer link cross pin.1931-36 Bushing, rubber, for shock absorber link cross pin, #41151.

$11.90/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Bijur lubricator spring seal

p/n: 30-0434-32

Seal, spring shackle. For models with Bijur lubrication systems.

$5.30/ea.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Grommet

p/n: 32-0155-37

Grommet, sidemount upper. Sheet Metal Hole: 7/8" Center Hole: 1/2" Outside Diameter: 1-5/16" Slot Width: 1/16"

$4.00/ea.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Windshield weatherstrip

p/n: 19-0023-73

Weatherstrip, windshield, T-rubber, short style. Seven sixteenths (7/16) inch high.Height: .4375 inches.

$3.49/ft.
In Stock
Standard bumper

p/n: 33-0136-42

Bumper, standard. See detail page for specific usage.

$2.50/ea.
In Stock