Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

85 items found matching 1933 Cadillac 355C 4 door Touring - 7 Passenger
Side Window Run Channel Kit

p/n: 90-0140-58

This eight piece kit includes the inner and outer windowfelts, upper rigid run channels, and flexible run channels needed to complete two doors. Used for front or rear doors in models with vent windows in the door.

$227.59/set
Kit
Windshield Weatherstrip Seal Set

p/n: 70-0250-52

Windshield weatherstrip gasket seal kit is made to handle one-fourth (14") inch glass and retain the Garnish Molding. Seals windshield glass to body and protects interior of vehicle. All corners are correctly molded to fit perfectly. Exact reproductio

$215.69/set
Made to Order Takes 4 Days
Motor mount pad

p/n: 70-0742-11

Pad, motor support, rear, at transmission. Four (4) piece set.Height: 1.1875 inches.

$192.79/set
Made to Order Takes 2-3 Days
Front Door Vent Window Kit

p/n: 90-0378-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$192.59/set
Kit
Front Door Vent Window Weatherstrips

p/n: 38-0033-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$186.59/pr.
In Stock
Side Window Run Channel Kit

p/n: 90-0142-58

This six (6) piece kit includes the inner and outer windowfelts and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models without vent windows in the door.

$186.59/set
Kit
Hood hinge top strap pivot

p/n: 70-0045-42

Pivot, hood hinge top strap. Cold rolled steel as original. Furnished in a four and one half (4-1/2) foot strip long enough for all models.

$174.89/ea.
In Stock
Windshield frame mounting pad

p/n: 60-0450-52

Mounting pad, windshield lower frame to body. Forty eight (48) inches long. Molded in two (2) parts with joint in center. Canvas base as original.

$164.19/ea.
In Stock
Ferrule installing tool

p/n: 70-0662-69

Installing tool, door and trunk handle ferrule. For cars and trucks using door and trunk handle ferrules such as our #70-0111-69.

$149.89/ea.
In Stock
Vacuum cylinder diaphram

p/n: 50-0063-24

Diaphragm, electromatic clutch control vacuum cylinder. Restores proper operation to clutch if diaphragm leaks air.

$138.39/ea.
In Stock
Shock and stabilizer seal

p/n: 70-1185-33

Seals, shock absorber and rear stabilizer link. Eight (8) piece set.

$127.99/set
Made to Order Takes 1-2 Days
Steering column floorplate

p/n: 70-0263-88

Floorplate, steering column and pedals, fully detailed.Length: 5.5 inches. Width: 6.625 inches.

$124.79/ea.
Made to Order Takes 1-2 Days
Vacuum brake cylinder boot

p/n: 70-0010-24

Boot, vacuum brake cylinder. Made from durable rubber to original configuration.

$106.69/ea.
In Stock
Motor mount pad

p/n: 70-0740-11

Pad, motor support, front. Two (2) per car. Exact original configuration.

$103.69/pr.
Made to Order Takes 1-2 Days
Brake cable boot

p/n: 70-0067-24

Boot, brake cable at wheel, front and rear.Length: 4.0 inches.

$97.39/pr.
In Stock
Cadillac Motors pedal pad

p/n: 70-0076-22

Cadillac Motors pedal pads. Authentic straight diamond pattern. Especially good copy, fine detail.

$97.29/pr.
In Stock
Taillight mounting pad

p/n: 70-0216-15

Pads, taillight bracket to fender mounting.Length: 5.75 inches.

$96.99/pr.
Made to Order Takes 1-2 Days
Shock and stabilizer seal

p/n: 70-1184-33

Seals, shock absorber and rear stabilizer link. Eight (8) piece set.Width: 1.1875 inches.

$95.99/set
In Stock
Side mount spare grommet kit

p/n: 70-1137-37

Grommet set, spare wheel fender mount, for various applications to support arms, brace rods and cowl standoff posts.

$94.89/set
Made to Order Takes 4 Days
Gearshift floorplate

p/n: 70-0234-88

Floorplate, gearshift and handbrake, with metal insert.

$94.29/ea.
Made to Order Takes 2-3 Days
Cadillac V-8 pedal pad

p/n: 70-0148-22

Cadillac V-8 pedal pads, clutch and brake. Another rare one we finally found to copy. Superior copy.

$88.19/pr.
In Stock
Brake vacuum cylinder rod boot

p/n: 70-0485-24

Boot, brake vacuum cylinder rod, for piston type vacuum cylinder.

$84.99/ea.
Made to Order Takes 1-2 Days
Carpet heel plate

p/n: 70-0617-88

Heel mat, front carpet insert.Length: 13.5625 inches. Width: 9.75 inches.

$84.99/ea.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Motor mount pad

p/n: 70-0741-11

Pad, motor support, intermediate. Rubber only, made to install in your original case.

$76.89/pr.
Made to Order Takes 1-2 Days
Vacuum brake rod cover seal

p/n: 70-0327-24

Cover seal, vacuum brake valve operating rod.

$65.39/ea.
In Stock
Hood corner pad

p/n: 50-0036-42

Pads, hood corners, front. Original type with metal core and retaining tab.Width: 1.625 inches.

$64.99/pr.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$54.29/pr.
In Stock
Coil wire sleeve

p/n: 70-0109-21

Sleeve, coil wire to distributor. Fluted to match upper water hoses rubber only. V-12 & V-16 with coils mounted in radiator, V-8 with coils mounted horizontally on brace rods.

$53.79/ea.
Made to Order Takes 1-2 Days
Headlight mounting pad

p/n: 70-0256-21

Mounting pad, horn and headlight brace rod to fender. One and one half (1-1/2) inches by three and one eighth (3-1/8) inches outside diameter.

$52.99/pr.
In Stock
Taillight gasket

p/n: 70-0258-15

Gaskets, taillight mounting under fender wire conduit base.Width: 3.25 inches.

$52.99/pr.
In Stock
Headlight mounting pad

p/n: 70-0257-14

Mounting pads, horn and headlight stanchion. Two and one half (2-1/2) inches by five (5) inches outside diameter.Length: 5.0 inches. Width: 2.5 inches.

$52.79/pr.
Made to Order Takes 1-2 Days
Flexible Run Channel

p/n: 70-1239-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$52.19/ea.
In Stock
Inner Fender Seal

p/n: 60-0288-45

Inner Fender Seal for anti-rattle, runningboard apron to body, or fender splash panels. Nine sixteenths (9/16) inch by seven eighths (7/8) inch slotted sponge rubber to accept rivets. Sold in eight (8) foot strips.

$50.79/ea.
In Stock
Flexible Run Channel

p/n: 70-1238-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$47.89/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Fender light pad

p/n: 70-0692-16

Gasket, fender light.Length: 4.5625 inches.

$44.99/pr.
Made to Order Takes 2-3 Days
Wiring grommet

p/n: 70-0410-21

Grommets, horn wire exit from horn motor cover.

$44.99/pr.
In Stock
Headlight grommet

p/n: 70-0254-14

Grommets, radiator shell headlight crossbar braceHeight: .3125 inches.

$43.49/pr.
Made to Order Takes 1-2 Days
Starter pedal pad

p/n: 70-1183-18

Pad, starter pedal. Original pattern, rectangular style.Length: 2.0625 inches. Width: 1.625 inches.

$42.99/ea.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$42.29/ea.
In Stock
Horn trumpet grommet

p/n: 70-1199-21

Grommets, horn trumpet mounting. Seven eighths (7/8) inch inside diameter. For the one (1) inch inside diameter see our #70-1200-21.

$32.69/pr.
Made to Order Takes 1-2 Days
Horn trumpet grommet

p/n: 70-1200-21

Grommets, horn trumpet mounting. One (1) inch inside diameter, 1-3/8 inch outside diameter, 9/16 inch high.

$29.49/pr.
In Stock
Body bolt cushion

p/n: 70-0265-48

Cushion for body bolts, for use in metal cups. Fully molded rubber. One and one half inch (1 1/2") outside diameter by seven sixteenths inch (7/16') inside hole diameter by one and one fourth inch (1 1/4") height.

$20.69/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$20.39/ea.
In Stock
Door handle ferrule

p/n: 70-0111-69

Ferrule, for three fourths (3/4) inch outside door handle. Chrome plated brass. (See #70-0009-69 for grommet). Used for outside door handle or outside trunk handle.

$16.69/ea.
In Stock