Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

79 items found matching 1933 Chevrolet Master Eagle 2 door Convertible
Motor mount service

p/n: 60-0506-11

Motor Mount, rear support. Revulcanization service only. Send in old steel cores, two (2) pieces each support.Length: 3.375 inches. Width: 2.5 inches.

$189.49/pr.
Call or Email
Front bow weatherstrip

p/n: 70-0137-64

Weatherstrip, front bow-to-windshield, soft rubber, hollow body, proper screw holes, hinged flaps front and back.

$174.99/ea.
Made to Order Takes 1-2 Days
Windshield frame mounting pad

p/n: 60-0450-52

Mounting pad, windshield lower frame to body. Forty eight (48) inches long. Molded in two (2) parts with joint in center. Canvas base as original.

$164.19/ea.
Made to Order Takes 1-2 Days
Motor mount service

p/n: 60-0391-11

Cushion, motor mount, side. Two (2) per car. Revulcanization service only.Length: 2.5625 inches.

$159.19/pr.
Call or Email
Motor Mount

p/n: 60-0305-11

Side frame bracket to clutch. Housing bracket, 2-1/8" diameter, 2-1/4" high, round type.

$153.89/pr.
In Stock
Ferrule installing tool

p/n: 70-0662-69

Installing tool, door and trunk handle ferrule. For cars and trucks using door and trunk handle ferrules such as our #70-0111-69.

$149.89/ea.
In Stock
Transmission mount service

p/n: 60-0504-25

Insulator support, frame to free wheeling unit. Revulcanization service only.

$130.99/ea.
Call or Email
Motor mount service

p/n: 60-0502-11

Insulator, motor support, front.Length: 7.5 inches.

$124.79/ea.
Call or Email
Rumbleseat step pad

p/n: 60-0501-45

Step pad, rumbleseat, on rear fender, with bowtie emblem. Steel core with bolt.Width: 4.375 inches. Height: 5.25 inches.

$84.99/ea.
In Stock
Hood corner pad

p/n: 60-0042-42

Pads, hood corners, right and left. Four (4) piece set.Width: 1.125 inches. Height: 1.125 inches.

$84.49/set
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Side mount spare wheel grommet

p/n: 60-0002-37

Grommet, sidemount wheel carrier brace support-at-cowl panel. Heavy brass core, flexible neck, close copy of original.

$77.29/ea.
In Stock
Body Anti-Squeak Rubber

p/n: 60-0054-73

Bulb type seal, gravel shield-to-rear bumper, anti-squeak. Also used as a door weatherstrip for some makes and models. Twelve (12) foot strip.

$57.49/ea.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$54.29/pr.
In Stock
Rumbleseat step pad

p/n: 60-0126-45

Pad, rumbleseat step, on rear bumper bracket or fender. Rubber cover only, full slip-over type with bowtie emblem.

$52.79/ea.
Made to Order Takes 1-2 Days
Headlight mounting pad

p/n: 60-0178-14

Pads, headlight bracket mounting. Two (2) inch by three and five eighths (3-5/8) inch overall.Length: 3.625 inches. Width: 2.0 inches.

$51.69/pr.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Bowtie emblem pedal pad

p/n: 60-0043-22

Pads, brake and clutch pedals. One and seven eighths (1-7/8) inch by four (4) inch overall. Excellent detail with bowtie emblem like original.

$46.49/pr.
In Stock
Accelerator pedal pad

p/n: 60-0430-40

Cover, accelerator pedal. Exact pattern of original. Slipover type. Use your old steel core.Length: 7.875 inches.

$45.39/ea.
Made to Order Takes 1-2 Days
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Rumbleseat lid bumper pad

p/n: 60-0191-87

Bumper pad, rumbleseat lid, upper corners. Compare with our #70-0120-87.Width: 1.0 inches. Height: 1.125 inches.

$45.19/pr.
In Stock
Brake and clutch shank seal

p/n: 60-0019-24

Seal, brake and clutch pedal shank to floorboard. Single bellows rubber cup, seals air drafts around pedals.

$44.99/pr.
In Stock
Accelerator rod seal

p/n: 60-0086-40

Grommet, accelerator rod through toe board. Brass core as original.

$43.69/ea.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$42.29/ea.
In Stock
Headlight mounting pad

p/n: 60-0558-14

Pad, headlight bracket at fender. See also our #60-0178-14. Two and one eighth (2-1/8) inch by three and seven sixteenths (3-7/16) inch.Length: 3.

$41.89/pr.
In Stock
Exhaust support grommet

p/n: 60-0404-13

Grommet, muffler pipe support.Length: 3.125 inches.

$38.89/ea.
Made to Order Takes 1-2 Days
Horn button contact cushion

p/n: 60-0344-21

Cushion, horn blowing button.Height: 1.0 inches.

$36.89/ea.
In Stock
5" Wide Bowdrill Cloth Tape

p/n: 70-1175-65

Bowdrill cloth tape is used for covering convertible side window weatherstrip. Available in a 5 ft roll.

$35.49/ea.
In Stock
Brake shaft bushing

p/n: 60-0371-24

Bushing, brake cross shaft bracket.

$34.39/pr.
In Stock
Taillight mounting pad

p/n: 60-0075-15

Pad, taillight and license bracket mounting. Two and five eighths (2-5/8) inch by four and one half (4-1/2) inch.Length: 4.5 inches. Width: 2.625 inches.

$34.39/ea.
In Stock
Starter button

p/n: 60-0322-21

Starter button, push on replacement to rod. Two (2) inch outside diameter.

$31.19/ea.
In Stock
Cowl vent gasket

p/n: 60-0044-54

Gasket, cowl vent. One (1) piece sponge rubber shear die cut to correct dimensions. Replaces #4034247-8.

$29.99/ea.
In Stock
Headlight mounting pad

p/n: 60-0557-14

Pad, headlight bracket to radiator shell. Round, with proper type weatherlip as original. Two (2) required per vehicle.

$24.89/pr.
In Stock
Headlight grommet

p/n: 60-0154-14

Grommet, headlight and horn wire conduit through radiator shell. Two (2) holes for two (2) separate conduits.Height: .21875 inches.

$23.99/ea.
In Stock
Firewall grommet

p/n: 60-0010-45

Grommet, firewall, oblong four (4) hole style. Fits steel retainer for throttle and choke cables, oil and temperature lines.

$23.89/ea.
In Stock
Starter button cover

p/n: 60-0166-21

Cover, starter pedal button. Rubber slip over type for old metal. Two (2) inch outside diameter. If car doesn't have old metal, see our #60-0322-21.

$21.89/ea.
In Stock
Brown steering column cushion

p/n: 60-0012-89

Grommet, steering column to cowl, for U-bolt clamp. Brown rubber. For black see our #60-0012-36.Color:brown Height: 1.25 inches.

$21.29/ea.
In Stock
Steering column cushion

p/n: 60-0012-36

Grommet, steering column to cowl, for U-bolt clamp. Black rubber. For brown see our #60-0012-89.Height: 1.25 inches.

$20.49/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$20.39/ea.
In Stock
Firewall grommet

p/n: 70-0158-21

Grommet for ignition switch conduit through firewall.

$16.99/ea.
In Stock
2-1/2" Bowdrill Cloth Tape

p/n: 70-1172-65

Bowdrill cloth tape is used for covering convertible side window weatherstrip. Available in a 5 ft roll.

$16.79/ea.
In Stock
Door handle ferrule

p/n: 70-0111-69

Ferrule, for three fourths (3/4) inch outside door handle. Chrome plated brass. (See #70-0009-69 for grommet). Used for outside door handle or outside trunk handle.

$16.69/ea.
In Stock
2-1/2" Tan Bowdrill Cloth Tape

p/n: 70-1173-65

Tan bowdrill cloth tape is used for covering convertible side window weatherstrip.

$14.99/ea.
In Stock
Door check link rod end stop

p/n: 70-0326-70

End stop and pad, door check link rod. Rubber with embedded steel plate, five sixteenths (5/16) inch diameter thread. Most models with rod type door checks.

$13.99/ea.
In Stock
Door bumper

p/n: 70-1159-71

Pad, door side bumper. Clip retained.

$10.29/ea.
In Stock
Door Bumper

p/n: 70-1156-71

Pad, door side bumper. Clip retained. Appears identical to Atwood #107, #208.Width: 1.5 inches. Height: 1.3125 inches.

$10.29/ea.
In Stock
Door bumper

p/n: 70-1155-71

Pad, door jamb (door side bumper).Length: 1.25 inches. Width: .9375 inches.

$10.29/ea.
In Stock