Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

72 items found matching 1933 Chrysler Royal CT 2 door Convertible
Runningboard matting

p/n: 40-0212-49

Runningboard matting.

$1,035.29/set
Made to Order Takes 1-2 Days
Accelerator pedal pad

p/n: 40-0014-40

Accelerator pedal. Perfect copy in every detail, including heavy two (2) piece metal core with mounting tabs as original.Length: 10.3125 inches.

$196.29/ea.
Made to Order Takes 2-3 Days
Door check strap

p/n: 40-0535-70

Strap, door check. T-type, special heavy duty construction of rubber with multiple ply webbing and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.

$170.39/pr.
In Stock
Axle rebound pad

p/n: 40-0373-32

Bumpers, rear axle. Revulcanization service only.Length: 3.0 inches.

$119.19/pr.
Call or Email
Rear bumper grommet

p/n: 40-0112-30

Grommets, rear bumper symmetrical, right and left. Perfect detailing on both inner and outer surfaces. Fully molded rubber. Three and three fourths inch (3-3/4") outside length by two and one fourths inch (2-1/4") outside width by one and three fourths i

$115.59/pr.
In Stock
Swing-out Windshield Weatherstrip

p/n: 70-0057-52

This swing-out windshield weatherstrip comes in an twelve foot (12') strip and mounts into the metal channel attached to the glass. The rubber slides into the T-groove and creates a seal when the glass is pressed against the body of the vehicle.

$99.29/ea.
In Stock
Side mount grommet

p/n: 40-0039-37

Grommets, sidemount.Length: 5.75 inches.

$90.99/pr.
In Stock
Rumbleseat step pad

p/n: 40-0012-44

Pad, rumbleseat step bears Chrysler medallion logo in center.Height: .50 inches.

$80.79/ea.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Brake and clutch pedal pad

p/n: 40-0038-22

Pad, brake and clutch pedal. See also our #40-0072-22.Length: 3.8125 inches. Width: 2.3125 inches.

$71.99/pr.
In Stock
Rear bumper grommet

p/n: 40-0180-30

Grommet, rear bumper support bar to gas tank apron. One and three fourths (1-3/4) inch inside diameter.

$69.19/pr.
Made to Order Takes 1-2 Days
Carpet heel plate

p/n: 40-0087-88

Heel pad for carpet. Identical to original. Five and three fourths (5-3/4) inch by ten and one half (10-1/2) inch, to be stitched in place.Length: 10.

$67.99/ea.
In Stock
Hood corner pad

p/n: 40-0127-42

Pads, hood corners, brass core. Approximately 80 degree angle. Integral tabs for installing.Length: 1.50 inches.

$62.89/pr.
In Stock
Hood corner pad

p/n: 40-0128-42

Pads, hood corners. Square type, brass core. Integral installation tabs. 90 degree angle, used on front or rear corners, as required.

$60.99/pr.
In Stock
Window weatherstrip

p/n: 70-0084-77

Weatherstrip, fixed back and quarter windows, plain type. Seven and one half (7-1/2) foot strip.Length: 90.0 inches. Width: .5625 inches. Height: .

$60.79/ea.
In Stock
Windshield weatherstrip

p/n: 40-0320-52

Seal, windshield. Lower, glass frame to cowl. Approximately four (4) foot strip. Note: for 2 piece windshields

$60.79/ea.
In Stock
Fuel neck grommet

p/n: 40-0091-39

Grommet, fuel filler neck. Fully molded large oval style. Bottom is flat. Four and one half inch (4 1/2") outside width by five by one half inch (5 1/2") outside length. Two and five sixteenths inch (2-5/16") inside hole diameter by three fourths inch (3/

$58.39/ea.
In Stock
Body Anti-Squeak Rubber

p/n: 60-0054-73

Bulb type seal, gravel shield-to-rear bumper, anti-squeak. Also used as a door weatherstrip for some makes and models. Twelve (12) foot strip.

$57.49/ea.
In Stock
Cowl vent gasket

p/n: 40-0170-54

Gasket, cowl vent, high grade sponge for twin cowl vents of thirty four (34) inch circumference.Length: 34.0 inches. Width: .75 inches. Height: .

$56.39/pr.
In Stock
Hood bumper

p/n: 40-0164-42

Pad, hood panel center bracket. Hollow, to fit over original steel bracket.Length: 1.375 inches. Width: 1.375 inches.

$56.29/pr.
In Stock
Side mount cover pad

p/n: 40-0314-37

Anti-rattle, spare wheel cover in fenderwell.Width: .25 inches.

$55.99/pr.
In Stock
Vacuum clutch cylinder boot

p/n: 40-0084-24

Boot, automatic clutch vacuum cylinder rod.Length: 4.0 inches.

$55.79/ea.
Made to Order Takes 1-2 Days
Fuel neck grommet

p/n: 40-0067-39

Grommet, fuel filler neck. Oblong, fully molded rubber. Four and one eighth inch (4-1/8") outside length by two and one fourth inch (2-1/4") inside diameter.

$53.79/ea.
Made to Order Takes 1-2 Days
Hood bumper

p/n: 40-0354-42

Bumper, fender to hood. Two (2) per car. Held by four (4) rivets.Length: 2.9375 inches.

$53.79/pr.
Made to Order Takes 1-2 Days
Gearshift boot

p/n: 40-0074-88

Dust cover, gearshift lever. Elbow type.

$52.19/ea.
Made to Order Takes 1-2 Days
Side mount grommet

p/n: 40-0165-37

Grommet, spare wheel mounting brace, side mounted spares.

$52.19/pr.
Made to Order Takes 1-2 Days
Gearshift boot

p/n: 40-0163-88

Dust cover, gearshift lever.

$51.49/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Brake and clutch shank seal

p/n: 40-0175-24

Seal, brake and clutch pedal shank to floorboard. One and one half (1-1/2) inch by two and one eighth (2-1/8) inch by three fourths (3/4) inch thick.

$41.39/pr.
In Stock
Horn trumpet grommet

p/n: 40-0086-21

Grommet for trumpet horn wire through motor cover. Close reproduction. Two (2) per car.

$41.19/pr.
Made to Order Takes 1-2 Days
5" Wide Bowdrill Cloth Tape

p/n: 70-1175-65

Bowdrill cloth tape is used for covering convertible side window weatherstrip. Available in a 5 ft roll.

$35.49/ea.
In Stock
Brake and clutch shank seal

p/n: 50-0066-24

Grommet, brake and clutch pedal floor seal.Width: 1.8125 inches. Height: 2.375 inches.

$35.19/pr.
In Stock
Brake and clutch shank seal

p/n: 40-0016-24

Seal, brake and clutch pedal shank to floorboard (draft excluder).Length: 2.4375 inches. Width: 1.875 inches.

$31.99/pr.
In Stock
Rumbleseat lid bumper pad

p/n: 40-0297-85

Bumper, rumbleseat lid. Sometimes used on trunk. One half (1/2) inch by one (1) inch by one (1) inch. Two (2) per car.Length: 1.0 inches. Width: 1.0 inches.

$25.49/pr.
In Stock
Taillight mounting pad

p/n: 40-0061-15

Pad, taillight mounting.Chrysler 1932-33 Pad, tail light mounting. Chrysler and other WPC cars. Chrysler 1932-33 Pad, rumbleseat step mounting.

$25.39/ea.
In Stock
Hood bumper

p/n: 70-1507-42

Bumper, hood side panel. Metal core as original, six (6) per car.

$22.59/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$20.39/ea.
In Stock
Brake shaft stop bumper

p/n: 40-0343-24

Cushion cap assembly, brake and clutch pedal stop screw. Brass cap with vulcanized rubber pad.Height: .50 inches.

$18.99/ea.
In Stock
Door bumper

p/n: 40-0316-70

Bumper, door side, lower, on lock post. Retained by dovetail tapping plate.Length: 1.5625 inches. Width: 1.5625 inches.

$17.49/ea.
In Stock
Coil wire sleeve

p/n: 40-0336-21

Nipple, sparkplug wire at sparkplug, for right angle plug terminal. This is an exact copy of the style used at the time. Not a modernistic makeover.

$17.19/ea.
In Stock
2-1/2" Bowdrill Cloth Tape

p/n: 70-1172-65

Bowdrill cloth tape is used for covering convertible side window weatherstrip. Available in a 5 ft roll.

$16.79/ea.
In Stock
Door bumper

p/n: 40-0215-70

Bumper, door check link.

$16.19/ea.
In Stock
2-1/2" Tan Bowdrill Cloth Tape

p/n: 70-1173-65

Tan bowdrill cloth tape is used for covering convertible side window weatherstrip.

$14.99/ea.
In Stock
Door bumper

p/n: 40-0037-70

Pad, door jamb. One and nine sixteenths (1-9/16) inch long by one and one eighth (1-1/8) inch wide.Length: 1.625 inches. Width: 1.0625 inches.

$13.29/ea.
In Stock
Battery cable grommet

p/n: 40-0322-21

Grommet, battery ground cable through frame.

$13.19/ea.
Made to Order Takes 1-2 Days
Shock and stabilizer bushing

p/n: 50-0220-32

Bushing, for shock absorber link cross pin or stabilizer link cross pin.1931-36 Bushing, rubber, for shock absorber link cross pin, #41151.

$12.99/ea.
In Stock