Search Results
Quarter vent weatherstrip
p/n: 40-0281-76
Weatherstrip, quarter window. Both sections, R & L, each made in one (1) strip to facilitate manufacturing. Must join two (2) ends together.
Swing-Out Windshield Weatherstrip Set
p/n: 70-1276-52
This swing-out windshield weatherstrip set includes the fully molded bottom seal and the rubber strip that runs around the top and sides. The fully molded bottom piece is perfectly formed for the corners and includes a knotch for the windshield crank.
Door check strap
p/n: 40-0535-70
Strap, door check. T-type, special heavy duty construction of rubber with multiple ply webbing and molded-in steel crossbar. Full length as original with one eighth (1/8) inch by seven eighths (7/8) inch steel crossbar.
Gearshift floorplate
p/n: 40-0105-88
Floorplate, gearshift. Black rubber. For brown see our #40-0105-89. Metal core, bend as needed at assembly. See #40-0111-88 and #40-0111-89 for boot.
Windshield Gasket
p/n: 40-0431-50
This swing-out windshield gasket mounts into the metal channel attached to the glass and creates a seal when the glass is pressed against the body of the vehicle. It has molded corners for a precise, factory fit.
Rear bumper grommet
p/n: 40-0064-30
Grommets, rear bumper, right and left. Fully molded rubber. Four and three fourths inch (4-3/4") outside length by four and seven sixteenths inch (4-7/16") outside width by one and nine sixteenths inch (1-9/16") inside hole length by one half inch (1/2')
Gearshift Floorplate, Brown
p/n: 40-0105-89
Floorplate, gearshift. Brown rubber. For black see our #40-0105-88. Metal core, bend as needed at assembly. See #40-0111-88 and #40-0111-89 for boot.
Horn mounting pad
p/n: 40-0194-21
Pad, horn grille housing mounting. Five and one fourth (5-1/4) inch by seventeen (17) inch overall.
Peel-N-Stick Trunk Weatherstrip
p/n: 70-1691-WT
This Peel-N-Stick Trunk Weatherstrip is designed for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Front bumper grommet
p/n: 40-0057-30
Grommets, front bumper. Fully molded rubber, inside hole slightly rectangular. Four and one half inche (4-1/2") length by three and three eighths inch (3-3/8") width by one and three eighths inch (1-3/8") inside hole length by one and one fourth inch (1-1
Brown handbrake floorplate
p/n: 40-0106-89
Floorplate, handbrake. Brown rubber. For black see our #40-0106-24. Metal core as original. Flat plate, can be bent as required.
Bumper grommet
p/n: 40-0047-30
Grommets, front and rear bumpers, right and left. Fully molded rubber. Four and one fourths inch (4-1/4") outside length by three inches (3") outside width by one and five eighths inch (1-5/8") inside hole length by one half inch (1/2") inside hole width
Bumper grommet
p/n: 40-0048-30
Grommets, bumper. Some front and some rear, right and left. Fully molded rubber. Three and thirteen sixteenths inch (3-13/16") outside length by three and one fourth inch (3-1/4") outside width by one and three fourths (1-3/4") inside hole length by seven
Handbrake floorplate
p/n: 40-0106-24
Floorplate, handbrake. Black rubber. For brown see our #40-0106-89. Metal core as original. Flat plate, can be bent as required.Length: 6.50 inches.
Trunk Weatherstrip
p/n: 70-1691-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Swing-out Windshield Weatherstrip
p/n: 40-0036-52
This swing-out windshield weatherstrip comes in an eleven foot (11') strip and mounts into the metal channel attached to the glass. The rubber slides into the T-groove and creates a seal when the glass is pressed against the body of the vehicle.
Door weatherstrip
p/n: 40-0538-73
Weatherstrip, door bottom, four (4) door. For two (2) door see our #40-0537-73. Held to door by steel strip. Sponge type as original.Width: 1.375 inches.
Headlight bracket pad
p/n: 40-0218-14
Pad, headlight to bracket without steel core.Length: 5.125 inches.
Brown brake and clutch pad
p/n: 40-0121-89
Pads, brake and clutch pedal. Brown rubber. For black see our #40-0121-22. Oval style, perfect copy.
Fender welting 1/4" bead 50ft
p/n: 70-1098-44
Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five
Fender welting 3/16 bead 50ft
p/n: 70-1100-44
Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi
Fender welting 50ft chrome
p/n: 70-1102-44
Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.
Brown brake and clutch pad
p/n: 40-0107-89
Pads, brake and clutch pedal. Brown rubber. For black see our #40-0107-22. Full slip over type to fit old pedal.
Brown starter rod boot
p/n: 40-0257-89
Boot, starter rod through toe board, tall style. Brown rubber. For black see our #40-0257-21. One and five eighths (1-5/8) inch high with steel bushing.
Brown steering column grommet
p/n: 40-0144-89
Grommet, steering column to toe board. Brown rubber. For black see our #40-0144-36. Two and three fourths (2-3/4) inch by seven and one half (7-1/2) inch.
Carpet heel plate
p/n: 40-0087-88
Heel pad for carpet. Identical to original. Five and three fourths (5-3/4) inch by ten and one half (10-1/2) inch, to be stitched in place.Length: 10.
Brake and clutch pedal pad
p/n: 40-0107-22
Pads, brake and clutch pedal. Black rubber. For brown see our #40-0107-89. Full slip over type to fit old pedal.
Brown accelerator pedal pad
p/n: 40-0113-89
Pad, accelerator pedal. Brown rubber. For black see our #40-0113-40. Slipover type. Exact pattern, perfect copy in all details.
Swing-out Windshield Weatherstrip
p/n: 40-0018-52
This swing-out windshield weatherstrip comes in an eleven foot (11') strip and mounts into the metal channel attached to the glass. The rubber slides into the T-groove and creates a seal when the glass is pressed against the body of the vehicle.
Fenderskirt edge seal
p/n: 40-0279-44
Pad, wheel shield. Closely copied from original for perfect fit. Ten (10) foot strip, sufficient for one (1) car.Length: 120.0 inches. Height: .75 inches.
Hood corner pad
p/n: 40-0127-42
Pads, hood corners, brass core. Approximately 80 degree angle. Integral tabs for installing.Length: 1.50 inches.
Brake and clutch pedal pad
p/n: 40-0121-22
Pads, brake and clutch pedal. Black rubber. For brown see our #40-0121-89. Oval style, perfect copy.
Hood corner pad
p/n: 40-0128-42
Pads, hood corners. Square type, brass core. Integral installation tabs. 90 degree angle, used on front or rear corners, as required.
Window weatherstrip
p/n: 70-0084-77
Weatherstrip, fixed back and quarter windows, plain type. Seven and one half (7-1/2) foot strip.Length: 90.0 inches. Width: .5625 inches. Height: .
Brown steering column grommet
p/n: 40-0078-89
Grommet, steering column to toe board. Brown rubber. For black see our #40-0078-36.Color:brown Length: 5.375 inches.
Brown gearshift boot
p/n: 40-0111-89
Boot, base of gearshift lever. Brown rubber. For black see our #40-0111-88. Made separately to fit most of our gearshift floorplates. Copied from original.
Fuel Neck Grommet
p/n: 40-0043-39
Grommet, fuel filler neck. Fully molded rubber with retaining flange. Three and five eighths inch (3-5/8") outside diameter by two and one eighth inch (2-1/8") inside diameter by one inch (1") height.
Accelerator Pedal Pad
p/n: 40-0113-40
Pad, accelerator pedal. Black rubber. Slipover type. Exact pattern, perfect copy in all details.
Steering column grommet
p/n: 40-0144-36
Grommet, steering column to toe board. Black rubber. For brown see our #40-0144-89. Two and three fourths (2-3/4) inch by seven and one half (7-1/2) inch.
Steering column grommet
p/n: 40-0078-36
Grommet, steering column to toe board. Black rubber. For brown see our #40-0078-89.Length: 5.375 inches.
Brake and clutch shank seal
p/n: 40-0217-24
Draft cap for brake and clutch pedal.Length: 2.4375 inches. Width: 1.6875 inches.
Gearshift boot
p/n: 40-0111-88
Boot, base of gearshift lever. Black rubber. For brown see our #40-0111-89. Made separately to fit most of our gearshift floorplates. Copied from original.