Search Results

117 items found matching 1937 Buick Century 4 door Plainback Sedan
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Motor mount service

p/n: 50-0289-11

Motor mount, rear at bell housing. Revulcanization service only.

$251.50/pr.
Call or Email
Side window run channel kit

p/n: 90-0140-58

This eight (8) piece kit includes the inner and outer windowfelts, upper rigid run channels, and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models with vent windows in the door. Models with wood in the doors use our #70-1168-58 as lower rigid run channel.

$236.10/set
$212.50/set
10% discount
Kit
Quarter vent weatherstrip

p/n: 38-0058-76

Weatherstrip, quarter window vent. Replaces factory #4075459, 4075460.

$208.50/pr.
In Stock
Front Door Weatherstrip Kit

p/n: 90-0100-72

Front door weatherstrip. This set is the primary seal for the door to the body. Set includes the door perimeter weatherstrip and the door bottom weatherstrip. Enough for two (2) doors. Includes fasteners.

$204.70/set
In Stock
Rear Door weatherstrip

p/n: 90-0101-72

Door edge weatherstrip. This part is the primary door to body weatherstrip.

$194.20/set
In Stock
Front Door Vent Window Kit

p/n: 90-0373-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$194.40/set
$184.70/set
5% discount
Kit
Side window run channel kit

p/n: 90-0142-58

This six (6) piece kit includes the inner and outer windowfelts and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models without vent windows in the door.

$191.80/set
$172.60/set
10% discount
Kit
Motor mount service

p/n: 50-0234-11

Motor mount, front, upper or lower, as required. Revulcanization service only.

$171.20/pr.
Call or Email
Front Door Vent Window Weatherstrips

p/n: 38-0029-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$148.30/pr.
In Stock
Ferrule installing tool

p/n: 70-0662-69

Installing tool, door and trunk handle ferrule. For cars and trucks using door and trunk handle ferrules such as our #70-0111-69.

$145.40/ea.
In Stock
Windshield Gasket

p/n: 50-0250-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$141.60/ea.
In Stock
Rear Window Gasket Set

p/n: 50-0287-81

This rear window gasket set mounts around the two (2) separate back windows. They have vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$139.20/pr.
In Stock
Transmission mounting pad

p/n: 50-0257-25

Pad, transmission support. Special resilient rubber. Use your original channel, plate and cap. One (1) set, (2 pad per set) per car.

$121.50/set
Made to Order Takes 1-2 Days
Trunk Weatherstrip

p/n: 70-0797-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$104.30/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0083-85

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$103.20/ea.
In Stock
Axle rebound pad

p/n: 50-0230-35

Bumper, rear axle to frame. Two (2) per car.

$77.60/pr.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Antenna mount service

p/n: 50-0280-21

Mount, antenna, insulator shell assembly, runningboard. Revulcanization service only. Use in conjunction with our # 50-0305-21.

$75.90/pr.
Call or Email
Fenderskirt edge seal

p/n: 70-0055-45

Seal, fenderskirt edge. Each five (5) foot long. Similar to our #20-0111-44, but thicker.Length: 60.0 inches. Width: .25 inches.

$71.90/pr.
In Stock
Front stabilizer bushing

p/n: 50-0227-34

Bushing, front stabilizer shaft bracket. Two (2) per car.

$69.70/pr.
In Stock
Brown steering floorplate

p/n: 50-0260-89

Retainer, front floor mat on steering column (also called steering column floorplate). Brown rubber. For black see our #50-0260-36.

$65.70/ea.
Made to Order Takes 2-3 Days
Windshield division bar gasket

p/n: 70-0159-51

Gasket, windshield division post, inner and outer, also acts as retainer for outer division bar chrome, molding.

$64.50/set
In Stock
Front suspension bumper

p/n: 50-0125-32

Bumper, front suspension, lower arm.Width: 2.625 inches. Height: 2.5625 inches.

$64.10/pr.
In Stock
Hood corner pad

p/n: 70-0047-42

Pads, hood corners, rear. Original style with metal core and metal fastening tabs.

$62.50/pr.
In Stock
Hood corner pad

p/n: 50-0036-42

Pads, hood corners, front. Original type with metal core and retaining tab.Width: 1.625 inches.

$62.50/pr.
In Stock
Front bumper grommet

p/n: 50-0041-28

Grommets, front bumper, right and left. Fully molded rubber. Four and three fourths inch (4-3/4") outside length by three inches (3") outside width by one and five eighths inch (1-5/8") inside hole length by one half inch (1/2") inside hole width by one a

$61.30/pr.
In Stock
License light mounting pad

p/n: 50-0065-17

Mounting pad, license light.Width: 16.125 inches.

$60.90/ea.
Made to Order Takes 1-2 Days
Rear bumper grommet

p/n: 50-0042-29

Grommets, rear bumper. Fully molded rubber. Four and one fourth inch (4-1/4") outside length by two and three fourths inch (2-3/4") outside width. One and five eighths inch (1-5/8") inside hole length by nine sixteenths inch (9/16") inside hole width by f

$59.00/pr.
In Stock
Front Spring Rubber Bumper

p/n: 70-0329-32

Front Spring Rubber Bumper - for upper control arm on frame.

$58.20/pr.
In Stock
Parking light mounting pad

p/n: 50-0032-16

Mounting pad, parking light.Width: 10.0 inches.

$53.40/pr.
In Stock
Accelerator pedal pad

p/n: 50-0037-40

Pad, accelerator pedal. Slip-over type with heavy retainer lip to fit over original pedal after stripping old rubber off.Length: 8.625 inches.

$52.70/ea.
In Stock
Fuel neck grommet

p/n: 50-0067-39

Grommet, fuel filler neck. Oblong fully molded rubber. Two and one eighths inch (2 1/8") inch inside length by three and one half inch (3 1/2") outside diameter by three and three fourths inch (3 3/4") outside length.

$52.40/ea.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Channel, rigid run, window division bar. Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar.

$52.10/pr.
In Stock
Steering column floorplate

p/n: 50-0260-36

Retainer, front floor mat on steering column (also called steering column floorplate). Black rubber. For brown see our #50-0260-89.Width: 4.3125 inches.

$51.60/ea.
In Stock
Flexible Run Channel 6 Foot

p/n: 70-1239-58

Window run channel with stainless beaded edge. Six (6) foot length. Cloth covered, mohair lined, flexible channel for sides and top of door windows. Exact replacement for listed vehicles but can be used in many applications.

$48.20/ea.
In Stock
Beltline weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Seven sixteenths (7/16) inch wide, with chrome bead, mohair faced, flexible. Two (2) three (3) foot strips. Bend to fit.

$47.70/pr.
In Stock
Taillight Mounting Pad

p/n: 50-0045-15

Taillight mounting pad. Replaces #1299460-1.

$47.60/pr.
In Stock
Automatic choke cable cover

p/n: 50-0243-41

Cover, automatic choke cable at carburetor.

$46.20/ea.
In Stock
Vent division bar weatherstrip

p/n: 70-0791-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$46.10/pr.
In Stock
Brown brake and clutch pad

p/n: 50-0054-89

Pad, brake and clutch pedal. Brown rubber. For black see our part #50-0054-22. Perfect copy, fine detail.Color:brown Width: 3.125 inches.

$44.40/pr.
In Stock
Flexible Run Channel 5 Foot

p/n: 70-1238-58

Window run channel, stainless beaded edge. Cloth covered, mohair lined flexible metal channel for sides and top of door windows. Perfect dimensions, Five eighths (5/8) inch wide by nine sixteenths (9/16) inch overall height, exact replacement. Five (5) fo

$44.30/ea.
In Stock
Sliding Quarter Window Weatherstrip

p/n: 70-0353-78

Weatherstrip, inner and outer for sliding quarter window, chrome beaded, mohair faced, flexible stock. May be formed to required outline. Six (6) foot strip.

$43.50/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
Rumbleseat step mounting pad

p/n: 50-0182-44

Mounting pad, rumbleseat step to fender, proper beaded edge, exact copy.Width: 4.8125 inches.

$39.30/ea.
Made to Order Takes 1-2 Days
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$39.10/ea.
In Stock
Cowl vent weatherstrip

p/n: 70-0143-54

Gasket, cowl vent. Perfect copy of original, not a sponge substitute, top quality material.

$38.30/ea.
In Stock
Radio antenna end loop

p/n: 70-0105-21

End loop, radio antenna. Cord reinforced rubber with metal grommet. Mounted on runningboard on some models.

$38.20/ea.
In Stock
Firewall grommet kit

p/n: 50-0048-20

Firewall grommets.

$34.90/set
In Stock
Antenna boot

p/n: 70-0212-21

Boot, runningboard antenna wire connection.

$34.70/ea.
In Stock
Brake and clutch shank seal

p/n: 50-0066-24

Grommet, brake and clutch pedal floor seal.Width: 1.8125 inches. Height: 2.375 inches.

$32.50/pr.
In Stock
Brake and clutch pedal pad

p/n: 50-0054-22

Pad, brake and clutch pedal. Black rubber. For brown see our part #50-0054-89. Perfect copy, fine detail.Width: 3.125 inches. Height: 2.125 inches.

$28.80/pr.
In Stock
Firewall grommet

p/n: 50-0272-20

Grommet, water temperature indicator pipe through dash.

$28.80/ea.
In Stock
Starter solenoid boot

p/n: 70-0371-21

Boot, starter solenoid.

$26.60/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0798-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$26.50/ea.
In Stock
Trunk handle grommet

p/n: 50-0183-87

Grommet, trunk handle bezel-thru-trunk lid. Special size, one (1) inch inside diameter.Buick 1937 Grommet, trunk handle bezel-thru-trunk lid.

$25.90/ea.
In Stock
Antenna Mount Pad

p/n: 50-0305-21

Mounting pad, runningboard antenna. Use in conjunction with our # 50-0280-21.Length: 1.75 inches. Width: 1.75 inches. Height: 2.0 inches.

$24.90/ea.
In Stock
Firewall grommet

p/n: 50-0166-20

Grommet, wire harness-thru-firewall mat. Two (2) inch diameter with two and one fourth (2-1/4) inch outside diameter flange.

$24.60/ea.
In Stock
Glovebox door check grommet

p/n: 70-0285-88

Grommet, glovebox door check link, for one and one eighth (1-1/8) inches slot in dash.Length: 1.4375 inches. Width: .625 inches.

$20.60/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Body mounting pad

p/n: 50-0233-48

Shim, body sill.. Fully molded rubber, rectangular shaped. Two and one half inch (2 1/2") length by one and seven eighths inch (1 7/8") width by one half inch (1/2") inside hole diameter by three eighths inch (3/8") height. Buick useage for bolt location

$16.30/ea.
In Stock
Door handle ferrule

p/n: 70-0111-69

Ferrule, for three fourths (3/4) inch outside door handle. Chrome plated brass. (See #70-0009-69 for grommet). Used for outside door handle or outside trunk handle.

$15.40/ea.
In Stock
Body mounting pad

p/n: 50-0231-48

Shim, body sill. Fully molded rectangular rubber. A total of six (6) are needed per car. Three inches (3") length by one and eleven sixteenths (1 11/16") width by one half inch (1/2") inside hole diameter by three eighths inch (3/8") height. Buick useag

$15.00/ea.
In Stock
Firewall grommet

p/n: 50-0299-20

Grommet, two (2) holes for oil pressure and water temperature lines through firewall.

$13.90/ea.
In Stock
Wiper transmission gasket

p/n: 70-1197-53

Gasket, windshield wiper transmission. Replaces #4074294 & #4082366.

$13.90/pr.
In Stock
Front bumper gravel shield

p/n: 70-0127-30

Gravel shield, front bumper, anti-rattle.

$13.10/ea.
In Stock
Door check link rod end stop

p/n: 70-0326-70

End stop and pad, door check link rod. Rubber with embedded steel plate, five sixteenths (5/16) inch diameter thread. Most models with rod type door checks.

$13.00/ea.
In Stock
Body mounting pad

p/n: 50-0232-48

Shim, body sill, for #3, #5, and #7 body bolts. Six (6) per car.Width: 2.0 inches. Height: 2.0 inches.

$12.30/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Side window run channel

p/n: 70-1168-58

Channel, side window, pre-flocked, five sixteenths (5/16) inch wide base for one fourth (1/4) inch glass. Most Fisher closed bodies except those using stainless beaded channel. For nine sixteenths (9/16) inch wide channel, see our #70-1169-58.

$9.80/ft.
In Stock
Fabric hood lacing

p/n: 70-2221-42

Lacing, hood, fabric, webbing anti-squeak. DOES NOT have hollow center. Fasten with rivets if so found originally. Excellent quality.

$8.10/ft.
In Stock
Fabric hood lacing

p/n: 60-0578-42

Lacing, hood, fabric, webbing anti-squeak. With hollow center to receive wire if needed, or fasten with rivets if so found originally. Excellent quality. Seven eighths (7/8) inch by one eighths (1/8) inch thick.

$8.10/ft.
In Stock
Door bumper

p/n: 34-0025-42

Bumper, front and rear body hinge pillar, one (1) inch diameter by one fourth (1/4) inch thick, held by screw, steel core. Auxiliary, used only where needed to prevent door rattle.Note: also used on 1942-50 Packards with Clipper styling near t

$7.90/ea.
In Stock
Mounting pad

p/n: 50-0229-11

Mounting pad. Two and one fourth (2-1/4) inches outside diameter by five eighths (5/8) inch inside diameter by one half (1/2) inch thick.

$7.90/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$7.80/ea.
In Stock
Door check link rod end stop

p/n: 70-0384-70

Rubber washer, door check link stop.

$7.70/ea.
In Stock
Door handle ferrule grommet

p/n: 70-0173-69

Grommet for outside door handle ferrule. Similar to, but not interchangeable with our #70-0009-69.

$7.50/ea.
In Stock
Door bumper

p/n: 34-0131-37

Bumper, front door above the upper hinge on the upper radius of the door. Stiff-backed, retained by screw, mounted on door only.

$7.40/ea.
In Stock
Side window roller

p/n: 70-0117-62

Anti-rattle roller, side windows. Rubber only, replaces original perfectly and easily. Fits both styles of brackets.

$7.30/ea.
In Stock
Spark plug grommet

p/n: 70-1181-21

Grommet, spark plug and coil wire at distributor cap outlets. For seven (7mm) millimeter, later years.

$7.20/ea.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.00/ea.
In Stock
Door handle grommet

p/n: 70-0009-69

Grommet, for outside door handle ferrule (our #70-0111-69, ordered separately). Molded rubber with cloth covering per original.

$7.00/ea.
In Stock
Spark plug grommet

p/n: 70-1180-21

Grommet, spark plug & coil wire at distributor cap outlets. For nine (9mm) millimeter wire, earlier years.

$6.80/ea.
In Stock
Steering knuckle support seal

p/n: 50-0199-35

Seal, steering knuckle support, upper pivot pin. Four (4) required per car.Height: .5 inches.

$6.50/ea.
In Stock
Brown door lock knob

p/n: 70-0354-70

Knob for inside door lock control rod. Neutral brown color rubber, 3/32 inch hole. See also our #70-0660-70.

$6.30/ea.
In Stock
Shock and stabilizer grommet

p/n: 70-0274-33

Grommet, shock and stabilizer link. Eight (8) required per car. Fully molded rubber with locating collar. One and one sixteenth inch (1 1/16") outside diameter by nine sixteenths inch (9/16") locating collar outside diameter by three eighths inch (3/8") i

$6.30/ea.
In Stock
Door check link rod end stop

p/n: 70-0325-70

Pad, door check link. For rod type door check. One (1) inch diameter by three eighths (3/8) inch thick with five sixteenths (5/16) inch hole.

$6.10/ea.
In Stock
Sun visor end plug

p/n: 70-0330-89

End plug, swing-type sun visor tube. Brown only.

$6.10/ea.
In Stock
Brake cable anti-rub cover

p/n: 70-1701-24

Anti-rub cover, brake cable. Fits all models with seven sixteenths (7/16) inch outside diameter cable.Width: 2.0 inches.

$5.90/ea.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0411-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.90/ft.
In Stock
Pressure ring

p/n: 70-0261-69

Pressure ring (washer), sponge rubber, interior door handle and window regulator escutcheon. One and three fourths (1-3/4) inches outside diameter by three eighths (3/8) inch thick.

$5.90/ea.
In Stock
Trunk Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0518-85

Trunk weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.90/ft.
In Stock
Channel filler weatherstrip

p/n: 70-0075-57

Channel pad, window carrier, incorporating weatherstrip. Used for some side window lower channel.Width: .375 inches. Height: .6875 inches.

$5.80/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$5.70/ea.
In Stock
Side window bumper

p/n: 60-0195-62

Anti-rattle, side window, inner and outer. Fits slot in outer door body metal and inner window frame (garnish molding).Width: .75 inches. Height: .

$5.50/ea.
In Stock