Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

122 items found matching 1937 Cadillac LaSalle Series 50 4 door Convertible
Motor Mount

p/n: 70-0276-11

Front engine mount. Rubber and steel construction.

$266.69/pr.
In Stock
Detachable center post pad

p/n: 70-0248-67

Pads, center body removable pillar, Brass core, four (4) piece set.

$228.79/set
Made to Order Takes 5 Days
Side mount spare wheel grommet

p/n: 70-0119-37

Grommets, spare wheel sidemount arm.

$222.89/pr.
Made to Order Takes 1-2 Days
Front Door weatherstrip

p/n: 90-0102-72

Door edge weatherstrip. This part is the primary door to body weatherstrip.

$193.29/set
In Stock
Front Door Vent Window Kit

p/n: 90-0372-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$185.89/set
Kit
Motor mount

p/n: 70-0965-11

Motor mount, rear at transmission. Upper and lower cushions with metal washers molded in.

$182.99/set
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0027-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$179.59/pr.
Made to Order Takes 1-2 Days
Rear Door weatherstrip

p/n: 90-0103-72

Door edge weatherstrip. This part is the primary door to body weatherstrip.

$151.19/set
In Stock
Ferrule installing tool

p/n: 70-0662-69

Installing tool, door and trunk handle ferrule. For cars and trucks using door and trunk handle ferrules such as our #70-0111-69.

$149.89/ea.
In Stock
Windshield Gasket

p/n: 70-0601-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$128.19/ea.
In Stock
Windshield Gasket

p/n: 70-1785-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$128.19/ea.
In Stock
Shock and stabilizer seal

p/n: 70-1185-33

Seals, shock absorber and rear stabilizer link. Eight (8) piece set.

$127.99/set
Made to Order Takes 1-2 Days
Front bow weatherstrip

p/n: 70-0138-64

Weatherstrip, front bow-to-windshield, outer, right and left, molded with end hook, screw holes and clearances.Length: 27.0 inches.

$116.29/pr.
In Stock
Luggage rack grommet

p/n: 70-0287-46

Grommets, luggage rack brace rod through body. Styles with luggage rack arms.

$113.29/pr.
Made to Order Takes 1-2 Days
Front bow weatherstrip

p/n: 70-0157-64

Weatherstrip, front bow-to-windshield, inner, right and left, superior copy.Length: 25.0 inches.

$110.89/pr.
In Stock
Door weatherstrip

p/n: 70-0085-73

Weatherstrip, door opening, fits retainer under edge of body sill to form seal when door is closed. Six (6) foot strips.Length: 72.0 inches. Width: 1.

$107.59/pr.
In Stock
Gearshift boot

p/n: 70-0228-26

Boot, accordion style, for gearshift.Length: 4.5 inches. Width: 3.75 inches.

$107.59/ea.
Made to Order Takes 1-2 Days
Front spring bumper

p/n: 70-0163-32

Bumper, front spring lower arm.

$107.29/pr.
In Stock
Steering column floorplate

p/n: 70-0232-88

Floor seal, steering column and pedals.

$107.29/ea.
In Stock
Axle rebound pad

p/n: 70-0233-35

Spring bumper, rear axle. Fastens to spring clamp.

$105.59/pr.
Made to Order Takes 1-2 Days
LaSalle monogram pedal pad

p/n: 70-0037-22

LaSalle pedal pads, clutch and brake, excellent copy from authentic original with LaSalle monogram.

$99.59/pr.
In Stock
Brake vacuum cylinder rod boot

p/n: 30-0115-24

Boot, vacuum brake cylinder main rod. Accordion type, two (2) inches diameter by six (6) inches. Top quality workmanship and material.Length: 6.0 inches.

$97.39/ea.
In Stock
Shock and stabilizer seal

p/n: 70-1184-33

Seals, shock absorber and rear stabilizer link. Eight (8) piece set.Width: 1.1875 inches.

$95.99/set
In Stock
Rear bumper grommet

p/n: 70-0144-29

Grommets, rear bumper (Some cars have this type, some have our #70-0164-29, sold separately. They are both interchangeable and original). Fully molded rubber. Five inches (5") outside length by three and one eighths inch (3-1/8") outside width by one and

$92.59/pr.
In Stock
Bumper grommet

p/n: 70-0102-28

Grommets, bumper arm. Fully molded rubber. Five inches (5") outside length by three and one sixteenths inch (3-1/16") outside width by one and five eighths inch (1-5/8") inside hole length by one half inch (1/2") inside width by one and one half inch (1-1

$85.29/pr.
In Stock
Brake vacuum cylinder rod boot

p/n: 70-0485-24

Boot, brake vacuum cylinder rod, for piston type vacuum cylinder.

$84.99/ea.
Made to Order Takes 1-2 Days
Detachable center post pad

p/n: 70-0279-67

Pads, for bottom of folding post or body, brass core as original, screw held.Length: 1.875 inches. Width: 1.0625 inches.

$82.69/pr.
In Stock
Taillight mounting pad

p/n: 70-0112-15

Pad, taillight mounting, right and left, replaces original perfectly.

$81.19/pr.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Rear bumper grommet

p/n: 70-0164-29

Grommets, rear bumper. (Some cars have this type, some have our #70-0144-29, sold separately. They are both interchangeable and original). Fully molded rubber. Four inches (4") outside length by two and one eighths inch (2-1/8") outside width by one and f

$77.99/pr.
In Stock
Detachable center post pad

p/n: 70-0280-88

Pads, folding front seat rest, brass core. Also used as bumper, slat iron to compartment on convertibles.Width: 1.375 inches. Height: .28125 inches.

$77.29/pr.
In Stock
Hinge post weatherstrip

p/n: 70-0383-73

Weatherstrip, hinge post at instrument panel. Steel inserts at holes

$76.89/pr.
Made to Order Takes 2-3 Days
Fenderskirt edge seal

p/n: 70-0055-45

Seal, fenderskirt edge. Each five (5) foot long. Similar to our #20-0111-44, but thicker.Length: 60.0 inches. Width: .25 inches.

$74.89/pr.
In Stock
Rear window division bar seal

p/n: 70-0068-82

Seal, rear window divider, inner and outer for two (2) and three (3) light rear windows, two (2) piece set for one (1) division bar.

$71.89/set
In Stock
Windshield division bar gasket

p/n: 70-0159-51

Gasket, windshield division post, inner and outer, also acts as retainer for outer division bar chrome, molding.

$67.19/set
In Stock
Carpet heel plate

p/n: 70-0604-88

Heel mat, front carpet, driver's position.Length: 15.75 inches. Width: 6.25 inches.

$66.89/ea.
Made to Order Takes 1-2 Days
Hood corner pad

p/n: 70-0047-42

Pads, hood corners, rear. Original style with metal core and metal fastening tabs.

$64.99/pr.
In Stock
Fenderskirt edge seal

p/n: 20-0111-44

Pad, fenderskirt edge, similar to our #70-0055-45, but thinner. Approximately five (5) foot strip per skirt.Length: 60.0 inches. Width: .15625 inches.

$64.89/pr.
In Stock
Accelerator pedal pad

p/n: 70-0167-40

Pad, accelerator pedal. Slipover type, self retaining, fits over original metal after removing old rubber. Finely detailed copy.

$60.59/ea.
Made to Order Takes 1-2 Days
Front Spring Rubber Bumper

p/n: 70-0329-32

Front Spring Rubber Bumper - for upper control arm on frame.

$60.59/pr.
In Stock
Front stabilizer bushing

p/n: 70-0717-33

Bushing, front stabilizer bar to frame.Length: 1.875 inches. Width: .6875 inches. Height: 1.625 inches.

$60.59/pr.
In Stock
Fuel neck grommet

p/n: 70-0472-39

Grommet, fuel filler neck. Fully molded, oblong shaped. Three and one fourth inch (3 1/4") outside width by three and three fourths inch (3 3/4") outside length by two and three sixteenths inch (2 3/16") inside top hole diameter by two and five sixteenths

$60.39/ea.
In Stock
Handbrake pull rubber grip

p/n: 70-0385-24

Rubber grip, handbrake pull. This was an optional item alternating with a chrome handle.

$60.39/ea.
Made to Order Takes 1-2 Days
1935-1974 Cadillac Factory Parts Manual, CD

p/n: 07-1346-07

This GM Licensed Detroit Iron CD provides the most comprehensive set of digital Cadillac Factory parts manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.

$58.29/ea.
Gearshift knob

p/n: 30-0153-24

Knob, gearshift. Rubber only for flanged top nut on gearshift lever.

$54.99/ea.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$54.29/pr.
In Stock
Side mount cover pad

p/n: 70-0787-37

Pad, channel type, sidemount cover. Six (6) piece set. Two (2) 11.

$53.89/set
Made to Order Takes 2-3 Days
Brake and clutch shank seal

p/n: 70-0156-23

Grommet, brake and clutch pedal shank at toe board. Flange retained, perfect copy.

$52.19/pr.
In Stock