Search Results

90 items found matching 1937 Cadillac Series 75 0 door Chassis
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Side mount spare wheel grommet

p/n: 70-0119-37

Grommets, spare wheel sidemount arm.

$218.40/pr.
Made to Order Takes 1-2 Days
Rear bumper grommet

p/n: 70-0104-29

Grommets, rear bumper, right and left. Large type with one and one fourth (1-1/4) inch by five (5) inch openings.

$212.90/pr.
In Stock
Rear quarter vent weatherstrip

p/n: 38-0017-76

Weatherstrip, rear quarter window vent.

$207.50/pr.
Made to Order Takes 1-2 Days
Ferrule installing tool

p/n: 70-0662-69

Installing tool, door and trunk handle ferrule. For cars and trucks using door and trunk handle ferrules such as our #70-0111-69.

$145.40/ea.
In Stock
Shock and stabilizer seal

p/n: 70-1185-33

Seals, shock absorber and rear stabilizer link. Eight (8) piece set.

$124.20/set
Made to Order Takes 1-2 Days
Luggage rack grommet

p/n: 70-0287-46

Grommets, luggage rack brace rod through body. Styles with luggage rack arms.

$109.90/pr.
Made to Order Takes 1-2 Days
Door weatherstrip

p/n: 70-0085-73

Weatherstrip, door opening, fits retainer under edge of body sill to form seal when door is closed. Six (6) foot strips.Length: 72.0 inches. Width: 1.

$104.40/pr.
In Stock
Gearshift boot

p/n: 70-0228-26

Boot, accordion style, for gearshift.Length: 4.5 inches. Width: 3.75 inches.

$104.40/ea.
Made to Order Takes 1-2 Days
Rear bumper grommet

p/n: 70-0073-29

Grommets, rear bumper. Fully molded rubber. Five inches (5") outside length by three and five eighths inch (3-5/8") outside width by three and five sixteenths inch (3-5/16") inside hole length by one and one fourth inch (1-1/4") inside hole width by one a

$104.10/pr.
In Stock
Steering column floorplate

p/n: 70-0232-88

Floor seal, steering column and pedals.

$104.10/ea.
In Stock
Axle rebound pad

p/n: 70-0233-35

Spring bumper, rear axle. Fastens to spring clamp.

$102.40/pr.
Made to Order Takes 1-2 Days
Cadillac Motors pedal pad

p/n: 70-0076-22

Cadillac Motors pedal pads. Authentic straight diamond pattern. Especially good copy, fine detail.

$93.50/pr.
In Stock
Shock and stabilizer seal

p/n: 70-1184-33

Seals, shock absorber and rear stabilizer link. Eight (8) piece set.Width: 1.1875 inches.

$92.20/set
In Stock
Front spring bumper

p/n: 70-0215-32

Bumpers, front spring, lower arm.

$86.50/pr.
Made to Order Takes 1-2 Days
Cadillac V-8 pedal pad

p/n: 70-0148-22

Cadillac V-8 pedal pads, clutch and brake. Another rare one we finally found to copy. Superior copy.

$84.70/pr.
In Stock
Bumper grommet

p/n: 70-0102-28

Grommets, bumper arm. Fully molded rubber. Five inches (5") outside length by three and one sixteenths inch (3-1/16") outside width by one and five eighths inch (1-5/8") inside hole length by one half inch (1/2") inside width by one and one half inch (1-1

$81.90/pr.
In Stock
Brake vacuum cylinder rod boot

p/n: 70-0485-24

Boot, brake vacuum cylinder rod, for piston type vacuum cylinder.

$81.70/ea.
Made to Order Takes 1-2 Days
Taillight mounting pad

p/n: 70-0316-15

Pads, taillight mounting, right and left, top grade workmanship and material.

$81.70/pr.
Made to Order Takes 1-2 Days
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Fenderskirt edge seal

p/n: 70-0055-45

Seal, fenderskirt edge. Each five (5) foot long. Similar to our #20-0111-44, but thicker.Length: 60.0 inches. Width: .25 inches.

$71.90/pr.
In Stock
Windshield division bar gasket

p/n: 70-0159-51

Gasket, windshield division post, inner and outer, also acts as retainer for outer division bar chrome, molding.

$64.50/set
In Stock
Hood corner pad

p/n: 70-0047-42

Pads, hood corners, rear. Original style with metal core and metal fastening tabs.

$62.50/pr.
In Stock
Fenderskirt edge seal

p/n: 20-0111-44

Pad, fenderskirt edge, similar to our #70-0055-45, but thinner. Approximately five (5) foot strip per skirt.Length: 60.0 inches. Width: .15625 inches.

$62.30/pr.
In Stock
Handbrake pull rubber grip

p/n: 70-0385-24

Rubber grip, handbrake pull. This was an optional item alternating with a chrome handle.

$58.00/ea.
Made to Order Takes 1-2 Days
Door weatherstrip

p/n: 70-0229-73

Weatherstrip, front door upper hinge, brass core as original.

$54.10/pr.
In Stock
Gearshift knob

p/n: 30-0153-24

Knob, gearshift. Rubber only for flanged top nut on gearshift lever.

$52.80/ea.
In Stock
Fuel neck grommet

p/n: 70-0050-39

Grommet, fuel filler neck. Fully duplicates original with large retaining flange. Flexible, molded rubber. Four and one eighth inch (4 1/8") outside diameter by two and three sixteenth inch (2 3/16") inside hole diameter by fifteen sixteenths inch (15/16"

$52.40/ea.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Channel, rigid run, window division bar. Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar.

$52.10/pr.
In Stock
Accelerator rod boot

p/n: 70-0227-41

Boot, accordion style for accelerator rod.

$44.50/ea.
Made to Order Takes 1-2 Days
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$39.10/ea.
In Stock
Radio antenna end loop

p/n: 70-0105-21

End loop, radio antenna. Cord reinforced rubber with metal grommet. Mounted on runningboard on some models.

$38.20/ea.
In Stock
Antenna boot

p/n: 70-0212-21

Boot, runningboard antenna wire connection.

$34.70/ea.
In Stock
Side mount cover pad

p/n: 70-0077-37

Pads, channel type, for sidemount covers. Eight (8) piece set.Width: .25 inches. Height: .6875 inches.

$33.70/set
Made to Order Takes 3 Days
Firewall grommet

p/n: 70-1203-20

Grommet, firewall. Four and one eighth (4-1/8) inches long type for various electrical and dash gauges. Also see our #32-1201-20 and #32-0225-20.

$28.90/ea.
In Stock
Starter solenoid boot

p/n: 70-0371-21

Boot, starter solenoid.

$26.60/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0798-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$26.50/ea.
In Stock
Rear spring bushing

p/n: 70-0589-32

Bushing, rear spring, front or rear eye leaf.

$21.50/ea.
In Stock
Glovebox door check grommet

p/n: 70-0285-88

Grommet, glovebox door check link, for one and one eighth (1-1/8) inches slot in dash.Length: 1.4375 inches. Width: .625 inches.

$20.60/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Firewall grommet

p/n: 70-0158-21

Grommet for ignition switch conduit through firewall.

$15.70/ea.
In Stock
Body mounting pad

p/n: 70-0235-48

Pad, body mounting. Fully molded rubber with locating collar. Rectangular shaped. Three inches (3") length by two inches (2") width by fifteen sixteenths inch (15/16") locating collar outside diameter by one half inch (1/2") inside hole diameter. Three ei

$14.00/ea.
In Stock
Door check link rod end stop

p/n: 70-0326-70

End stop and pad, door check link rod. Rubber with embedded steel plate, five sixteenths (5/16) inch diameter thread. Most models with rod type door checks.

$13.00/ea.
In Stock
Stabilizer grommet

p/n: 70-0436-33

Grommet, front stabilizer bar link or rear shock link to axle. Fully molded rubber. Eight (8) required per car. One and one fourth inch (1 1/4") outside diameter by one half inch (1/2") inside hole diameter by seven eighths inch (7/8") height. Used as a f

$12.10/ea.
In Stock
Shock and stabilizer bushing

p/n: 50-0220-32

Bushing, for shock absorber link cross pin or stabilizer link cross pin.1931-36 Bushing, rubber, for shock absorber link cross pin, #41151.

$11.90/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Body mounting pad

p/n: 50-0131-48

Pad, body mounting. Fully molded rubber with locating collar. Two inch (2") square by thirteen sixteenths inch (13/16") locating collar outside diameter by one half inch (1/2") locating collar inside diameter. Three eights inch (3/8") square base height b

$9.90/ea.
In Stock
Door bumper

p/n: 70-1159-71

Pad, door side bumper. Clip retained.

$9.40/ea.
In Stock
Fabric hood lacing

p/n: 70-2221-42

Lacing, hood, fabric, webbing anti-squeak. DOES NOT have hollow center. Fasten with rivets if so found originally. Excellent quality.

$8.10/ft.
In Stock
Fabric hood lacing

p/n: 60-0578-42

Lacing, hood, fabric, webbing anti-squeak. With hollow center to receive wire if needed, or fasten with rivets if so found originally. Excellent quality. Seven eighths (7/8) inch by one eighths (1/8) inch thick.

$8.10/ft.
In Stock
Door check link rod end stop

p/n: 70-0384-70

Rubber washer, door check link stop.

$7.70/ea.
In Stock
Door handle ferrule grommet

p/n: 70-0173-69

Grommet for outside door handle ferrule. Similar to, but not interchangeable with our #70-0009-69.

$7.50/ea.
In Stock
Firewall grommet

p/n: 32-0225-20

Grommet, wire harness through firewall. Sheet Metal Hole: 1-1/2" Center Hole: 11/16" Outside Diameter: 2-1/4" Slot Width: 3/32"

$7.50/ea.
In Stock
Body mounting pad

p/n: 70-0264-48

Cushion, body bolts under washer below bracket. Fully molded rubber. One and one half inch (1 1/2") inch outside diameter by seventeen thirty seconds inch (17/32") inside hole diameter by one fourth inch (1/4") height.

$7.40/ea.
In Stock
Side window roller

p/n: 70-0117-62

Anti-rattle roller, side windows. Rubber only, replaces original perfectly and easily. Fits both styles of brackets.

$7.30/ea.
In Stock
Firewall grommet

p/n: 32-0226-20

Grommet, firewall, for handbrake cable. Sheet Metal Hole: 1-1/8" Center Hole: 3/8" Outside Diameter: 1-9/16" Slot Width: 3/32"

$7.20/ea.
Made to Order Takes 1-2 Days
Spark plug grommet

p/n: 70-1181-21

Grommet, spark plug and coil wire at distributor cap outlets. For seven (7mm) millimeter, later years.

$7.20/ea.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.00/ea.
In Stock
Door handle grommet

p/n: 70-0009-69

Grommet, for outside door handle ferrule (our #70-0111-69, ordered separately). Molded rubber with cloth covering per original.

$7.00/ea.
In Stock
Firewall grommet

p/n: 32-1201-20

Grommet, firewall. Used for wiring. Sheet Metal Hole: 1-3/32" Center Hole: 9/16" Outside Diameter: 1-9/16" Slot Width: 3/32"

$6.80/ea.
In Stock
Run channel mohair liner

p/n: 70-2863-58

Liner, mohair. Liner with a rubber backing. Apply with adhesive to division bars and channels. Helps reline guide bars on lock side of hardtops and convertibles.

$6.39/ft.
In Stock
Brown door lock knob

p/n: 70-0354-70

Knob for inside door lock control rod. Neutral brown color rubber, 3/32 inch hole. See also our #70-0660-70.

$6.30/ea.
In Stock
Door check link rod end stop

p/n: 70-0325-70

Pad, door check link. For rod type door check. One (1) inch diameter by three eighths (3/8) inch thick with five sixteenths (5/16) inch hole.

$6.10/ea.
In Stock
Sun visor end plug

p/n: 70-0330-89

End plug, swing-type sun visor tube. Brown only.

$6.10/ea.
In Stock
Brake cable anti-rub cover

p/n: 70-1701-24

Anti-rub cover, brake cable. Fits all models with seven sixteenths (7/16) inch outside diameter cable.Width: 2.0 inches.

$5.90/ea.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0411-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.90/ft.
In Stock
Pressure ring

p/n: 70-0261-69

Pressure ring (washer), sponge rubber, interior door handle and window regulator escutcheon. One and three fourths (1-3/4) inches outside diameter by three eighths (3/8) inch thick.

$5.90/ea.
In Stock
Channel filler weatherstrip

p/n: 70-0075-57

Channel pad, window carrier, incorporating weatherstrip. Used for some side window lower channel.Width: .375 inches. Height: .6875 inches.

$5.80/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
Made to Order Takes 2-3 Days
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$5.70/ea.
In Stock
Windshield Weatherstrip

p/n: 70-1190-52

Channel, windshield, for windows without chrome reveal molding. (With 2 piece windshield, select gasket for division bar).

$5.50/ft.
In Stock
Channel filler weatherstrip

p/n: 70-0489-58

Weatherstrip, channel filler, door window sash channel and some quarter window sash channel. Special type with wide weatherstrip edge to be trimmed at assembly, when necessary.

$5.49/ft.
In Stock
Door weatherstrip

p/n: 70-0066-73

Seal, door bottom, held by metal track or by clips. (See our # 70-0391-73 for clips). 2 door styles need about seven (7) foot per car.

$5.49/ft.
In Stock
Channel filler weatherstrip

p/n: 70-0241-57

Weatherstrip, side window, double-lip seal type, used as filler for one fourth (1/4) inch glass in metal carrier channel.Width: .375 inches. Height: .

$5.40/ft.
In Stock
Window weatherstrip

p/n: 70-1192-52

Gasket, window, for models with chrome reveal molding.

$5.40/ft.
In Stock
Wheel cover cushion

p/n: 70-0633-38

Filler, wheel cover to wheel. Approximately two and one eighth (2-1/8) inches long each, twenty (20) required per car. (Five (5) per wheel cover).

$5.10/ea.
In Stock
Wiring grommet

p/n: 32-0161-21

Grommet, spark plug wire organizer bracket. Sheet Metal Hole: 1/2" Center Hole: 3/8" Outside Diameter: 11/16" Slot Width: 1/16"

$4.80/ea.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Filler and cushion strip

p/n: 70-1237-48

Filler and cushion strip, many applications. Five thirty seconds (5/32) inch by one and five eighths (1-5/8) inch.

$4.20/ft.
In Stock
Filler and cushion strip

p/n: 70-1236-48

Filler and cushion strip, many applications. One sixteenth (1/16) inch by one and three eighths (1-3/8) inch.

$4.00/ft.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Door weatherstrip fastener

p/n: 70-0303-73

Metal clip for attaching door edge weatherstrip, our #70-0411-73. For one fourth (1/4) inch holes. Doors usually require one (1) clip per every six (6) inches. Estimate needs accordingly.

$2.60/ea.
In Stock
Door weatherstrip fastener

p/n: 70-0391-73

Clip, door bottom weatherstrip retaining, for our #70-0066-73 lower door weatherstrip, to fit one fourth (1/4) inch holes. Doors usually require one clip per every six (6) inches. Estimate needs accordingly.

$2.50/ea.
In Stock
Standard bumper

p/n: 33-0136-42

Bumper, standard. See detail page for specific usage.

$2.50/ea.
In Stock