Search Results

112 items found matching 1938 Buick Century 2 door Convertible
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Motor mount service

p/n: 50-0289-11

Motor mount, rear at bell housing. Revulcanization service only.

$251.50/pr.
Call or Email
Front Door Vent Window Kit

p/n: 90-0445-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$210.90/set
$200.40/set
5% discount
Kit
Front Door weatherstrip

p/n: 90-0102-72

Door edge weatherstrip. This part is the primary door to body weatherstrip.

$187.60/set
In Stock
Motor mount service

p/n: 50-0234-11

Motor mount, front, upper or lower, as required. Revulcanization service only.

$171.20/pr.
Call or Email
Front Door Vent Window Weatherstrips

p/n: 38-0006-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$165.20/pr.
In Stock
Windshield Gasket

p/n: 70-0601-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$124.40/ea.
In Stock
Front bow weatherstrip

p/n: 70-0138-64

Weatherstrip, front bow-to-windshield, outer, right and left, molded with end hook, screw holes and clearances.Length: 27.0 inches.

$112.80/pr.
In Stock
Front bow weatherstrip

p/n: 70-0157-64

Weatherstrip, front bow-to-windshield, inner, right and left, superior copy.Length: 25.0 inches.

$107.60/pr.
In Stock
Rear bumper grommet

p/n: 50-0126-29

Grommets, rear bumper. Hollow construction for good fit. Fully molded rubber with locating tabs. Four and three eighths inch (4-3/8") outside length by two and three fourths inch (2-3/4") outside width by one and three fourths inch (1-3/4") inside hole le

$104.20/pr.
In Stock
Trunk Weatherstrip

p/n: 70-0796-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$99.80/ea.
In Stock
Rear spring bumper

p/n: 50-0177-35

Bumper, rear spring, right and left.

$92.20/pr.
Made to Order Takes 1-2 Days
Trunk Weatherstrip

p/n: 70-1128-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$90.50/ea.
In Stock
Transmission mounting pad

p/n: 50-0335-25

Transmission support pad, insulator blocks, upper and lower.

$87.80/pr.
In Stock
Detachable center post pad

p/n: 70-0279-67

Pads, for bottom of folding post or body, brass core as original, screw held.Length: 1.875 inches. Width: 1.0625 inches.

$79.40/pr.
Made to Order Takes 2-3 Days
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Detachable center post pad

p/n: 70-0280-88

Pads, folding front seat rest, brass core. Also used as bumper, slat iron to compartment on convertibles.Width: 1.375 inches. Height: .28125 inches.

$74.20/pr.
In Stock
Hinge post weatherstrip

p/n: 70-0383-73

Weatherstrip, hinge post at instrument panel. Steel inserts at holes

$73.80/pr.
In Stock
Fenderskirt edge seal

p/n: 70-0055-45

Seal, fenderskirt edge. Each five (5) foot long. Similar to our #20-0111-44, but thicker.Length: 60.0 inches. Width: .25 inches.

$71.90/pr.
In Stock