Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

97 items found matching 1938 Cadillac Series 61 0 door Chassis
Motor Mount

p/n: 70-0276-11

Front engine mount. Rubber and steel construction.

$266.69/pr.
In Stock
Door weatherstrip

p/n: 70-0085-73

Weatherstrip, door opening, fits retainer under edge of body sill to form seal when door is closed. Six (6) foot strips.Length: 72.0 inches. Width: 1.

$107.59/pr.
In Stock
Front spring bumper

p/n: 70-0163-32

Bumper, front spring lower arm.

$107.29/pr.
In Stock
Steering column floorplate

p/n: 70-0232-88

Floor seal, steering column and pedals.

$107.29/ea.
In Stock
Axle rebound pad

p/n: 70-0233-35

Spring bumper, rear axle. Fastens to spring clamp.

$105.59/pr.
Made to Order Takes 1-2 Days
Cadillac Motors pedal pad

p/n: 70-0076-22

Cadillac Motors pedal pads. Authentic straight diamond pattern. Especially good copy, fine detail.

$97.29/pr.
In Stock
Rear bumper grommet

p/n: 70-0144-29

Grommets, rear bumper (Some cars have this type, some have our #70-0164-29, sold separately. They are both interchangeable and original). Fully molded rubber. Five inches (5") outside length by three and one eighths inch (3-1/8") outside width by one and

$92.59/pr.
In Stock
Cadillac V-8 pedal pad

p/n: 70-0148-22

Cadillac V-8 pedal pads, clutch and brake. Another rare one we finally found to copy. Superior copy.

$88.19/pr.
In Stock
Bumper grommet

p/n: 70-0102-28

Grommets, bumper arm. Fully molded rubber. Five inches (5") outside length by three and one sixteenths inch (3-1/16") outside width by one and five eighths inch (1-5/8") inside hole length by one half inch (1/2") inside width by one and one half inch (1-1

$85.29/pr.
In Stock
Taillight mounting pad

p/n: 70-0316-15

Pads, taillight mounting, right and left, top grade workmanship and material.

$84.99/pr.
Made to Order Takes 1-2 Days
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Front spring bumper

p/n: 70-0171-32

Bumper, front spring, upper arm (on frame).

$78.69/pr.
In Stock
Rear bumper grommet

p/n: 70-0164-29

Grommets, rear bumper. (Some cars have this type, some have our #70-0144-29, sold separately. They are both interchangeable and original). Fully molded rubber. Four inches (4") outside length by two and one eighths inch (2-1/8") outside width by one and f

$77.99/pr.
In Stock
Fenderskirt edge seal

p/n: 70-0055-45

Seal, fenderskirt edge. Each five (5) foot long. Similar to our #20-0111-44, but thicker.Length: 60.0 inches. Width: .25 inches.

$74.89/pr.
In Stock
Rear window division bar seal

p/n: 70-0068-82

Seal, rear window divider, inner and outer for two (2) and three (3) light rear windows, two (2) piece set for one (1) division bar.

$71.89/set
In Stock
Windshield division bar gasket

p/n: 70-0159-51

Gasket, windshield division post, inner and outer, also acts as retainer for outer division bar chrome, molding.

$67.19/set
In Stock
Rear stabilizer bushing

p/n: 70-0406-33

Bushings, rear stabilizer. Comes as a four (4) piece set. Fully molded rubber. One and one half inch (1 1/2') top outside diameter by one and five eighths inch (1 5/8") bottom outside diameter by three fourths inch (3/4") inside hole diameter by three fou

$66.49/set
In Stock
Fenderskirt edge seal

p/n: 20-0111-44

Pad, fenderskirt edge, similar to our #70-0055-45, but thinner. Approximately five (5) foot strip per skirt.Length: 60.0 inches. Width: .15625 inches.

$64.89/pr.
In Stock
Front stabilizer bushing

p/n: 70-0717-33

Bushing, front stabilizer bar to frame.Length: 1.875 inches. Width: .6875 inches. Height: 1.625 inches.

$60.59/pr.
In Stock
Handbrake pull rubber grip

p/n: 70-0385-24

Rubber grip, handbrake pull. This was an optional item alternating with a chrome handle.

$60.39/ea.
Made to Order Takes 1-2 Days
Horn relay cover

p/n: 70-0623-21

Cover, top of horn relay.

$59.19/ea.
Made to Order Takes 1-2 Days
Accelerator pedal pad

p/n: 70-0275-40

Pad, accelerator pedal, full slipover type, fits over old metal after removing original rubber.Length: 8.5 inches.

$58.39/ea.
In Stock
1935-1974 Cadillac Factory Parts Manual, CD

p/n: 07-1346-07

This GM Licensed Detroit Iron CD provides the most comprehensive set of digital Cadillac Factory parts manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.

$58.29/ea.
Fuel neck grommet

p/n: 70-0091-39

Grommet, fuel filler neck. Saddle style. Three and three eighths inch (3 3/8") outside width by three and five eighths inch (3 5/8") outside length by two and one fourth inch (2 1/4") inside hole diameter by one and one fourth inch (1 1/4") height.

$56.99/ea.
In Stock
Fuel neck grommet

p/n: 50-0067-39

Grommet, fuel filler neck. Oblong fully molded rubber. Two and one eighths inch (2 1/8") inch inside length by three and one half inch (3 1/2") outside diameter by three and three fourths inch (3 3/4") outside length.

$54.59/ea.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$54.29/pr.
In Stock
Brake and clutch shank seal

p/n: 70-0156-23

Grommet, brake and clutch pedal shank at toe board. Flange retained, perfect copy.

$52.19/pr.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$42.29/ea.
In Stock
Cowl vent weatherstrip

p/n: 70-0143-54

Gasket, cowl vent. Perfect copy of original, not a sponge substitute, top quality material.

$41.49/ea.
In Stock
Antenna boot

p/n: 70-0212-21

Boot, runningboard antenna wire connection.

$37.59/ea.
In Stock
Firewall grommet

p/n: 70-0621-20

Grommet, firewall, for cowl vent drain hose and throttle control cable.

$36.69/ea.
In Stock
Firewall grommet

p/n: 70-1203-20

Grommet, firewall. Four and one eighth (4-1/8) inches long type for various electrical and dash gauges. Also see our #32-1201-20 and #32-0225-20.

$31.29/ea.
In Stock
Starter solenoid boot

p/n: 70-0371-21

Boot, starter solenoid.

$28.79/ea.
In Stock
Rear Spring Pad

p/n: 70-0191-32

Pad, rear spring insulator for two (2) inch wide springs. (see our number 70-0245-32 for two and one fourth (2-1/4) inch springs). Cloth reinforced. Four (4) per vehicle.

$25.89/ea.
In Stock
Spare tire bumper

p/n: 70-0126-37

Rest pad, spare wheel cover, metal core, screw held type. Eight (8) required per car.Width: 1.75 inches. Height: 1.4375 inches.

$25.49/ea.
In Stock
Spare tire bumper

p/n: 70-0125-37

Rest pad, spare wheel cover, metal core, tab held type. Sixteen (16) required per car.Width: 1.75 inches. Height: .75 inches.

$23.29/ea.
In Stock
Glovebox door check grommet

p/n: 70-0285-88

Grommet, glovebox door check link, for one and one eighth (1-1/8) inches slot in dash.Length: 1.4375 inches. Width: .625 inches.

$22.29/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$20.39/ea.
In Stock
Door Handle Ferrule

p/n: 60-0389-69

Ferrule, outside door handle. Chrome with rubber sleeve. Two (2) piece set includes one (1) chrome piece and one (1) rubber piece. Enough for one door.

$19.29/set
In Stock
Lower suspension arm dust seal

p/n: 70-0625-32

Dust seal, lower suspension arm bushing. Four (4) required per car.

$18.99/ea.
In Stock
Firewall grommet

p/n: 70-0158-21

Grommet for ignition switch conduit through firewall.

$16.99/ea.
In Stock
Body mounting pad

p/n: 70-0235-48

Pad, body mounting. Fully molded rubber with locating collar. Rectangular shaped. Three inches (3") length by two inches (2") width by fifteen sixteenths inch (15/16") locating collar outside diameter by one half inch (1/2") inside hole diameter. Three ei

$15.19/ea.
In Stock
Lower suspension arm dust seal

p/n: 70-0624-32

Dust seal, "O" ring. Lower suspension arm pin bushing. Four (4) required per car.Height: .25 inches.

$14.39/ea.
In Stock
Front bumper gravel shield

p/n: 70-0127-30

Gravel shield, front bumper, anti-rattle.

$14.19/ea.
In Stock
Door check link rod end stop

p/n: 70-0326-70

End stop and pad, door check link rod. Rubber with embedded steel plate, five sixteenths (5/16) inch diameter thread. Most models with rod type door checks.

$13.99/ea.
In Stock