Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

83 items found matching 1938 Packard Eight 2 door Convertible
Suspension bushing

p/n: 30-0386-36

Bushing and pin assembly cartridge. Inlox type, front wheel lower support arm inner pin. Shipped with instructions for reinstalling.Length: 5.75 inches.

$300.59/pr.
In Stock
Motor mount service

p/n: 30-0375-11

Insulator assembly, rear engine support at transmission housing. Revulcanization service only.

$260.29/pr.
Call or Email
Windshield Gasket

p/n: 30-0281-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$204.99/ea.
Made to Order Takes 2-3 Days
Front suspension bumper

p/n: 30-0490-32

Bumper, front suspension (inside of coil spring). Made with three five sixteenths (5/16) inch studs as original.

$202.69/pr.
Made to Order Takes 2-3 Days
Front Door Vent Window Weatherstrips

p/n: 30-0018-55

This front door vent window weatherstrip set is a four (4) piece set that contains the upper and lower seals that cover the top, front, and bottom of the vent window. All of the pieces are designed from original parts for a precise, factory fit.

$197.69/set
In Stock
Front suspension bumper

p/n: 30-0228-32

Bumper assembly, front suspension inside coil spring, with five sixteenths (5/16) inch threaded studs as found originally.

$195.19/pr.
In Stock
Front spring bushing

p/n: 30-0393-32

Bushing assembly, front wheel support; upper and outer. Inlox type cartridge bushing assembly.

$190.49/pr.
Made to Order Takes 2-3 Days
Side roof rail weatherstrip

p/n: 30-0031-65

Weatherstrip, side window. Fits metal channel. Rubber only. Twelve (12) foot strip.Length: 144.0 inches. Width: .75 inches.

$143.79/ea.
In Stock
Transmission stabilizer

p/n: 30-0252-24

Stabilizer, fore and aft transmission to frame. A factory service part used to remedy clutch chatter. Steel core as original.Length: 7.50 inches.

$134.89/ea.
Made to Order Takes 2-3 Days
Motor mount service

p/n: 30-0185-11

Insulator, motor support, rear assembly. Revulcanization service only.

$128.69/ea.
Call or Email
Front suspension bushing

p/n: 30-0239-32

Bushings, front suspension torque arm. Necessary for proper front end geometry.

$119.49/pr.
In Stock
Door lock striker service

p/n: 30-0398-71

Striker, door lock, front or rear as specified. Revulcanization service only. Send old complete striker.

$113.99/pr.
Call or Email
Front spring bumper

p/n: 30-0227-32

Bumper assembly, front spring rebound (upper arm). Steel core, with treaded stud just like original.

$111.99/pr.
In Stock
Detachable center post pad

p/n: 30-0423-67

Pad, convertible top right and left latches.Width: 3.0 inches. Height: 2.50 inches.

$111.79/pr.
Made to Order Takes 2-3 Days
Hood corner pad

p/n: 30-0011-42

Pads, hood front corners, large type. Molded right and left with metal cores and double tab retainers.Length: 3.1875 inches. Width: 2.125 inches.

$109.49/pr.
Made to Order Takes 2-3 Days
Door Weatherstrip

p/n: 30-0051-73

Weatherstrip, door edge. Retained by metal clips. (For clips, see our #70-0391-73). Fifteen (15) feet per strip.

$105.59/ea.
In Stock
Axle rebound pad

p/n: 30-0371-32

Bumper, rear frame to axle rubber. Two (2) per car.Length: 5.1875 inches. Width: 2.0625 inches.

$103.89/pr.
In Stock
Gearshift boot

p/n: 30-0178-24

Boot, gearshift cover. For cane shifts only.Length: 4.0 inches. Width: 3.0 inches. Height: 5.125 inches.

$98.89/ea.
In Stock
Hood corner pad

p/n: 30-0010-42

Pads, hood rear corners. High quality rubber with metal core as original.Length: 3.4375 inches. Width: 1.875 inches.

$88.19/pr.
In Stock
Accelerator pedal service

p/n: 30-0400-41

Pedal, accelerator. Revulcanization service only. Includes new ball sockets as original, with correctly detailed tread pattern.Length: 9.625 inches.

$87.29/ea.
Call or Email
Rear bumper grommet

p/n: 30-0067-29

Grommets, rear bumper.Length: 4.3125 inches. Width: 2.6875 inches.

$82.29/pr.
Made to Order Takes 1-2 Days
Motor mount pad

p/n: 30-0238-11

Cushions, motor support, at timing gear cover. One (1) pair required per car. Sold only in pairs.

$81.49/pr.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Rigid Run Channel

p/n: 30-0245-57

Channel, rigid run, for division bar opposite vent windows.

$78.69/pr.
In Stock
Red brake and clutch pedal pad

p/n: 30-0188-89

Pads, brake and clutch pedal, slip over type. Black and red rubber. For black only see our #30-0188-22.Length: 3.875 inches. Width: 2.875 inches.

$74.69/pr.
In Stock
Bumper grommet

p/n: 30-0039-28

Grommets, front or rear bumper. On models without trunk racks. Two (2) pair used per car if needing both front and rear bumpers. Three and five eighths inch (3-5/8") outside length by two and one fourth inch (2-1/4") outside width by one and five eighths

$72.99/pr.
In Stock
Prop shaft retainer bushing

p/n: 70-2268-27

Retainer, intermediate bearing. All models with two piece driveshafts.

$69.19/ea.
In Stock
Brake and clutch pedal pad

p/n: 30-0188-22

Pads, brake and clutch pedal, slip over type. Black rubber only. For black and red (semi-automatic clutch models) see our #30-0188-89.Length: 3.875 inches.

$67.89/pr.
In Stock
Convertible post bumper

p/n: 70-2155-67

Bumper, convertible top pillar. Fully molded out of rubber.Width: 1.0 inches. Height: 2.0625 inches.

$66.89/pr.
In Stock
Door bumper

p/n: 34-0305-71

Bumper assembly, front door hinge, upper, stop. Two (2) per car, steel core as original.Height: .6875 inches.

$59.79/pr.
In Stock
Taillight mounting pad

p/n: 30-0318-15

Gaskets, taillight mounting, with proper beading and shape as original. For all models with center license mounting.Length: 7.125 inches.

$59.39/pr.
In Stock
Cowl vent gasket

p/n: 30-0050-54

Gasket, cowl vent. Perfect reproduction, high quality, original configuration, not a sponge substitute.Length: 14.0 inches. Width: 5.75 inches.

$55.79/ea.
In Stock
Handbrake pull rubber grip

p/n: 30-0322-24

Rubber grip, handbrake lever.Length: 4.125 inches.

$55.49/ea.
In Stock
Firewall grommet

p/n: 30-0070-21

Grommet instrument board cables through firewall. Oval type with masked hole for six (6) wires or cables. Necessary replacement for correct restoration.

$54.99/ea.
In Stock
Fuel neck grommet

p/n: 30-0038-41

Grommet, fuel filler neck.

$54.99/ea.
In Stock
Gearshift knob

p/n: 30-0349-24

Knob, gearshift (floor shift type).

$54.39/ea.
In Stock
Beltline Weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 3ft pair.

$51.59/pr.
In Stock
Windshield filler

p/n: 30-0105-52

Filler, windshield division channel ends, upper and lower. Two (2) piece set.

$50.19/set
Made to Order Takes 1-2 Days
Brake and clutch shank seal

p/n: 30-0143-24

Boot, brake and clutch pedal shank at toe board.Length: 2.9375 inches.

$48.59/pr.
In Stock
Steering column grommet

p/n: 30-0106-36

Grommet, steering column at toe board.

$48.19/ea.
Made to Order Takes 1-2 Days
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Detachable center post pad

p/n: 30-0422-67

Pad, convertible top center latch. Excellent workmanship with metal insert like originalWidth: 2.0 inches. Height: 1.1875 inches.

$43.69/ea.
Made to Order Takes 2-3 Days
5" Wide Bowdrill Cloth Tape

p/n: 70-1175-65

Bowdrill cloth tape is used for covering convertible side window weatherstrip. Available in a 5 ft roll.

$35.49/ea.
In Stock
Taillight lens gasket

p/n: 30-0336-15

Gaskets, taillight door lens. For cars without center license light. Two (2) strips eleven and one half (11-1/2) inches long each.Length: 11.5 inches.

$31.29/pr.
In Stock
Spring shackle bushing

p/n: 30-0420-32

Bushing, spring shackle. Six (6) per car. Packard's "self flanging" type.

$28.29/ea.
In Stock
Lock cylinder gasket

p/n: 30-0389-71

Gasket, door lock handle escutcheon, front and rear doors. Two (2) or four (4) required per car.

$26.49/pr.
In Stock