Search Results

815 items found matching 1939
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Windshield division bar gasket

p/n: 30-0104-52

Gasket, windshield glass center division. Molded with screw holes and end pilots. Replaces #236866.

$97.90/ea.
In Stock
Accelerator pedal service

p/n: 30-0474-41

Pad, accelerator pedal. Revulcanization service only.Length: 9.625 inches. Width: 1.9375 inches.

$97.20/ea.
Call or Email
Motor mount service

p/n: 25-0062-11

Motor mount, upper front at cross member. One (1) per car. Revulcanization service only.Length: 4.75 inches. Width: 2.25 inches.

$95.90/ea.
Call or Email
LaSalle monogram pedal pad

p/n: 70-0037-22

LaSalle pedal pads, clutch and brake, excellent copy from authentic original with LaSalle monogram.

$95.70/pr.
In Stock
Front bumper grommet

p/n: 30-0001-28

Grommet, front bumper. Molded right and left with hollow construction as found on original.Length: 4.0 inches. Width: 2.25 inches.

$95.00/pr.
Made to Order Takes 1-2 Days
Gearshift boot

p/n: 30-0178-24

Boot, gearshift cover. For cane shifts only.Length: 4.0 inches. Width: 3.0 inches. Height: 5.125 inches.

$95.00/ea.
In Stock
Hood corner pad

p/n: 30-0059-42

Pad, hood rear corner. Molded left and right with a metal core.Length: 2.50 inches. Width: 1.75 inches.

$95.00/pr.
Made to Order Takes 2-3 Days
Runningboard edge seal

p/n: 30-0169-44

Liner, runningboard to body, (side apron to body seal). Set consists of two (2) pieces seven (7) foot long. One (1) inch width is after fold over.

$95.00/set
In Stock
Accelerator pedal service

p/n: 25-0067-40

Accelerator pedal. Black rubber. For brown see our #25-0067-89. Revulcanization service only.Length: 10.125 inches.

$94.70/ea.
Call or Email
Trunk Weatherstrip

p/n: 20-2382-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$94.70/ea.
In Stock
Trunk Weatherstrip

p/n: 70-1691-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$94.10/ea.
In Stock
Brake vacuum cylinder rod boot

p/n: 30-0115-24

Boot, vacuum brake cylinder main rod. Accordion type, two (2) inches diameter by six (6) inches. Top quality workmanship and material.Length: 6.0 inches.

$93.60/ea.
In Stock
Cadillac Motors pedal pad

p/n: 70-0076-22

Cadillac Motors pedal pads. Authentic straight diamond pattern. Especially good copy, fine detail.

$93.50/pr.
In Stock
Swing-out Windshield Weatherstrip

p/n: 40-0036-52

This swing-out windshield weatherstrip comes in an eleven foot (11') strip and mounts into the metal channel attached to the glass. The rubber slides into the T-groove and creates a seal when the glass is pressed against the body of the vehicle.

$92.20/ea.
In Stock
Accelerator pedal service

p/n: 50-0414-40

Pedal, accelerator. Revulcanization service only. Includes new rubber sockets for hinges.Length: 9.125 inches.

$92.10/ea.
Call or Email
Front coil spring pad

p/n: 30-0510-32

Insulator, front coil spring. Four (4) piece set.

$92.00/set
Made to Order Takes 1-2 Days
Trunk Weatherstrip

p/n: 70-1128-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$90.50/ea.
In Stock
Coil wire sleeve

p/n: 14-0022-21

Sleeve, spark plug wires from distributor to wiring tube, rubber only.

$90.30/pr.
Made to Order Takes 1-2 Days
Bumper grommet

p/n: 70-0088-28

Grommets, front or rear bumper. Fully original, hollow construction.

$90.10/pr.
In Stock
Front bumper grommet

p/n: 40-0077-30

Grommet, front bumper. Hollow construction for good fit as original.Length: 3.5625 inches.

$88.90/pr.
Made to Order Takes 1-2 Days
Taillight mounting pad

p/n: 70-0393-15

Mounting pad, rear light bracket to fender.

$88.90/pr.
In Stock
Trunk Weatherstrip

p/n: 20-2267-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$88.90/ea.
In Stock
Front spring bumper

p/n: 30-0087-32

Pads, rebound, front spring. Self retaining type.

$88.80/pr.
In Stock
Brake vacuum cylinder rod boot

p/n: 30-0163-24

Boot vacuum clutch cylinder rod.Length: 4.0 inches.

$88.40/ea.
In Stock
Transmission mounting pad

p/n: 50-0335-25

Transmission support pad, insulator blocks, upper and lower.

$87.80/pr.
Made to Order Takes 4 Days
Lower suspension arm dust seal

p/n: 70-0865-32

Dust seal, lower suspension arm bushing. Four (4) piece set.

$87.50/set
In Stock
Convertible top rest block

p/n: 20-2232-67

Pads, quarter to top bow.

$87.20/pr.
Ships in 3-4 Days
Convertible top rest block

p/n: 20-2233-67

Pads, quarter to top bow.

$87.20/pr.
Ships in 3-4 Days
Windshield division bar gasket

p/n: 27-0017-51

Gasket, division bar, inner and outer. With tapped brass core, sixteen (16) inches long. Models without division bar strainer built into body. Replaces #4090370 and #4090373.

$87.20/ea.
Made to Order Takes 2-3 Days
Front spring bumper

p/n: 70-0215-32

Bumpers, front spring, lower arm.

$86.50/pr.
Made to Order Takes 1-2 Days
Shifter relay boot

p/n: 30-0068-24

Boots, shifter relay shaft end support.

$86.50/pr.
In Stock
Windshield division bar gasket

p/n: 30-0467-52

Divider, windshield gasket. Replaces #235860.

$86.50/ea.
In Stock
Hood corner pad

p/n: 30-0088-42

Pad, hood front corner. Metal core, retained by four (4) tabs.Length: 3.25 inches. Width: 1.25 inches.

$85.50/pr.
In Stock
Rigid run channel

p/n: 70-0536-58

Run channel, front door window, for full length of division bar (approximately twenty nine (29) inches). Rigid, bright beaded edge, mohair lined channel, die trimmed and formed at top.

$85.50/pr.
In Stock
Stabilizer bushing

p/n: 30-0483-33

Bearings, stabilizer rear rod. Requires two (2) per car. Fully molded rubber. Two and one fourth inch (2 1/4") length by one and thirteen sixteenths inch (1 13/16") width by eleven sixteenths inch (11/16") inside hole diameter by two and one eighths inch

$85.10/pr.
Made to Order Takes 1-2 Days
Cadillac V-8 pedal pad

p/n: 70-0148-22

Cadillac V-8 pedal pads, clutch and brake. Another rare one we finally found to copy. Superior copy.

$84.70/pr.
In Stock
Hood corner pad

p/n: 30-0010-42

Pads, hood rear corners. High quality rubber with metal core as original.Length: 3.4375 inches. Width: 1.875 inches.

$84.70/pr.
In Stock
Plug wire sleeve

p/n: 30-0204-21

Sleeve, plug wire tube to distributor cap. One (1) pair required per car.Height: .9375 inches.

$84.50/pr.
In Stock
Front bumper grommet

p/n: 70-0291-28

Grommets, front bumper arm. Hollow construction for good fit. Fully molded rubber. Four and seven eighths inch (4-7/8") outside length by two and five eighths inch (2-5/8") outside width by one and five eighths inch (1-5/8") inside hole length by nine six

$84.10/pr.
In Stock
Accelerator pedal service

p/n: 30-0400-41

Pedal, accelerator. Revulcanization service only. Includes new ball sockets as original, with correctly detailed tread pattern.Length: 9.625 inches.

$83.80/ea.
Call or Email
Rigid run channel

p/n: 30-0180-57

Channel, rigid run, for vent window division bar. Chrome beaded edge, mohair lined steel channel to proper dimensions for window side of wing window frame.

$83.80/pr.
In Stock
Accelerator Pedal Service, Black

p/n: 70-1777-40

Accelerator pedal, black. Revulcanization service only.

$83.30/ea.
Call or Email
Trunk Weatherstrip

p/n: 70-1129-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$82.70/ea.
In Stock
Bumper grommet

p/n: 70-0102-28

Grommets, bumper arm. Fully molded rubber. Five inches (5") outside length by three and one sixteenths inch (3-1/16") outside width by one and five eighths inch (1-5/8") inside hole length by one half inch (1/2") inside width by one and one half inch (1-1

$81.90/pr.
In Stock
Stabilizer bushing

p/n: 30-0484-33

Bearings, stabilizer front rod. Requires two (2) per car. Fully molded rubber. Two and one fourth inch (2 1/4") length by one and thirteen sixteenths inch (1 13/16") width by nine sixteenths inch (9/16") inside hole diameter by two and one eighths inch (2

$81.90/pr.
Made to Order Takes 1-2 Days
Gearshift seal

p/n: 30-0165-24

Seal, gearshift to floorboard.Length: 5.625 inches. Width: 4.875 inches.

$81.30/ea.
In Stock
Steering column grommet

p/n: 30-0348-36

Grommet, steering column at toe board.Length: 4.375 inches.

$81.20/ea.
In Stock
Rear window division bar seal

p/n: 70-0246-82

Gasket set, back window divider post. Inner and outer, with mounting holes. Four (4) piece set.

$81.10/set
In Stock
Windshield division bar gasket

p/n: 60-0128-52

Retainer, windshield division bar molding. Inner and outer. With threaded brass core as original (molding not included). Two (2) piece set.

$80.50/set
In Stock
Rear bumper grommet

p/n: 30-0067-29

Grommets, rear bumper.Length: 4.3125 inches. Width: 2.6875 inches.

$79.00/pr.
Made to Order Takes 1-2 Days
Spare wheel carrier grommet

p/n: 30-0334-37

Grommet, rear spare wheel carrier bracket. Two (2) per car. (Also order our #32-0355-37 separately).

$79.00/pr.
Made to Order Takes 1-2 Days
Steering column grommet

p/n: 30-0288-36

Grommet, steering column.Length: 5.625 inches.

$79.00/ea.
In Stock
Motor mount pad

p/n: 30-0331-11

Bushing, front motor support at timing gear cover. One (1) pair required per car. Sold only in pairs.

$78.30/pr.
In Stock
Motor mount pad

p/n: 30-0238-11

Cushions, motor support, at timing gear cover. One (1) pair required per car. Sold only in pairs.

$78.30/pr.
In Stock
Windshield Weatherstrip

p/n: 60-0447-50

This swing-out windshield gasket is designed from the original part for superior fitment and seal. The seal mounts into the metal channel attached to the glass and creates a seal when the glass is pressed against the body of the vehicle. It has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$78.10/ea.
In Stock
Brown brake and clutch pad

p/n: 40-0121-89

Pads, brake and clutch pedal. Brown rubber. For black see our #40-0121-22. Oval style, perfect copy.

$77.80/pr.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Windshield division bar gasket

p/n: 30-0146-52

Gasket, windshield division bar. Molded inner and outer, fully detailed.Length: 13.625 inches.

$76.10/ea.
In Stock
Brown floorplate kit

p/n: 18-0014-89

Floor plate, brake and clutch pedal. Metal core as original, exact copy. Brown rubber. For black rubber see our #18-0014-24.

$75.70/ea.
In Stock
Front spring bumper

p/n: 70-0171-32

Bumper, front spring, upper arm (on frame).

$75.60/pr.
In Stock
Rigid run channel

p/n: 30-0245-57

Channel, rigid run, for division bar opposite vent windows.

$75.60/pr.
In Stock
Detachable center post pad

p/n: 70-0280-88

Pads, folding front seat rest, brass core. Also used as bumper, slat iron to compartment on convertibles.Width: 1.375 inches. Height: .28125 inches.

$74.20/pr.
In Stock
Brown accelerator service

p/n: 25-0067-89

Accelerator pedal. Brown rubber. For black see our #25-0067-40. Revulcanization service only.Color:brown Length: 10.125 inches.

$73.60/ea.
Call or Email
Stabilizer bushing

p/n: 60-0316-34

Bushing, front stabilizer shaft. Two (2) per car.Length: 1.875 inches. Width: 1.6875 inches. Height: 1.4375 inches.

$73.60/pr.
Made to Order Takes 1-2 Days
Accelerator Pedal Service, Brown

p/n: 70-1777-89

Accelerator pedal, Brown. Revulcanization service only.

$73.50/ea.
Call or Email
Brown accelerator service

p/n: 70-1802-89

Accelerator pedal. Brown rubber. For black see our #70-1802-40. Revulcanization service only.Color:brown Length: 7.375 inches. Width: 2.

$73.50/ea.
Call or Email
Taillight mounting pad

p/n: 40-0185-15

Pad, taillight mounting.Length: 8.8125 inches. Width: 3.875 inches.

$72.50/pr.
Made to Order Takes 1-2 Days
Rear bumper grommet

p/n: 70-0089-28

Grommets, rear bumper. Fully molded rubber. Four and one fourths inch (4-1/4") outside length by two and five sixteenths inch (2-5/16") outside width by one and eleven sixteenths inch (1-11/16") inside hole length by nine sixteenths inch (9/16") inside ho

$72.30/pr.
In Stock
Brown brake and clutch pad

p/n: 40-0107-89

Pads, brake and clutch pedal. Brown rubber. For black see our #40-0107-22. Full slip over type to fit old pedal.

$72.00/pr.
In Stock
Taillight mounting pad

p/n: 30-0132-15

Pads, taillight bracket mounting, with proper beading.Length: 6.625 inches.

$72.00/pr.
In Stock
Fenderskirt edge seal

p/n: 70-0055-45

Seal, fenderskirt edge. Each five (5) foot long. Similar to our #20-0111-44, but thicker.Length: 60.0 inches. Width: .25 inches.

$71.90/pr.
In Stock
Front bumper grommet

p/n: 50-0154-28

Grommets, front bumper. Fully molded rubber. Five and three fourths inch (5-3/4") outside length by two and thirteen sixteenths inch (2-13/16") outside width by two and five sixteenths inch (2-5/16") inside hole length by five eighths inch (5/8") inside h

$71.90/pr.
In Stock
Rear bumper grommet

p/n: 40-0363-30

Grommet, rear bumper to body, right and left. Fully molded rubber. Four and one fourths inch (4-1/4") length by two and three eighths inch (2-3/8") at widest end by one and eleven sixteenths inch (1-11/16") inside hole length by nine sixteenths inch (9/16

$71.90/pr.
In Stock
Red brake and clutch pedal pad

p/n: 30-0188-89

Pads, brake and clutch pedal, slip over type. Black and red rubber. For black only see our #30-0188-22.Length: 3.875 inches. Width: 2.875 inches.

$71.70/pr.
In Stock
Taillight mounting pad

p/n: 70-1110-15

Spacer, taillight and license light bracket to body. Right hand. For the left hand version see our #70-1109-15.Length: 4.5 inches.

$71.50/ea.
In Stock
Front bumper grommet

p/n: 60-0080-28

Grommets, front bumper, right and left. Hollow construction as original. Fully molded rubber. Three and five sixteenths inch (3-5/16") outside length by two and thirteen sixteenths inch (2-13/16") outside width by one and five eighths inch (1-5/8") inside

$70.90/pr.
In Stock
Front bumper grommet

p/n: 40-0301-30

Grommets, front bumper. Fully molded rubber. Four inches (4") outside length by one and five sixteenths inch (1-15/16") outside width by one and five eighths inch (1-5/8") inside hole length by one half inch (1/2") inside hole width by one and three eight

$70.90/pr.
In Stock
Axle rebound pad

p/n: 70-0210-32

Bottoming pads, rear axle. Rubber block mounts by bracket to rear axle tube.

$70.40/pr.
In Stock
Bumper grommet

p/n: 30-0039-28

Grommets, front or rear bumper. On models without trunk racks. Two (2) pair used per car if needing both front and rear bumpers. Three and five eighths inch (3-5/8") outside length by two and one fourth inch (2-1/4") outside width by one and five eighths

$70.20/pr.
In Stock
Taillight Mounting Pad

p/n: 50-0057-15

Taillight mounting pad. Replaces #1304394-5.

$70.20/pr.
Made to Order Takes 1-2 Days
Accelerator pedal service

p/n: 70-1802-40

Accelerator pedal. Black rubber. For brown see our #70-1802-89. Revulcanization service only.Length: 7.375 inches. Width: 2.0 inches.

$69.70/ea.
Call or Email
Front Stabilizer Kit

p/n: 60-0221-33

Link kit, full replacement, front stabilizer bar link. Twenty two (22) piece set. Hex head bolt 5/16"-24NF x 6-3/8" long. Comes with metal sleeve, metal cup washers and rubber grommets.

$69.60/set
In Stock
Golf Bag Door Weatherstrip

p/n: 30-0164-87

These golf bag door weatherstrips are designed from the original part for superior fitment and seal. The seals mount around the full perimeter of both golf bag doors.

$69.50/pr.
In Stock
Windshield division bar gasket

p/n: 70-0247-51

Gasket set, windshield divider post, inner and outer. Two (2) piece set with screw holes and pilots.

$69.00/set
In Stock
Side Window scraper seal

p/n: 60-0566-58

Weatherstrip, door window scraper seal, inner and outer. Slides into grove on top of the door's window opening and wipes the glass when window is raised and lowered. Customer will have to trim to length for proper fit. Four (4) piece set.

$67.90/set
In Stock
Detachable center post pad

p/n: 30-0432-67

Pad, convertible top removable center pillar.Length: 3.0625 inches. Width: 2.1875 inches.

$67.80/pr.
Made to Order Takes 1-2 Days
Front bumper grommet

p/n: 27-0054-28

Grommet, front bumper. Fully molded rubber, detailed and flanged as original. Four and one fourth inch (4-1/4") outside length by two and seven sixteenths inch (2-7/16") outside width. One and three fourths inch (1-3/4") inside hole length by nine sixteen

$67.50/pr.
In Stock
Brown brake and clutch pad

p/n: 50-0049-89

Pad, brake and clutch pedal. Brown rubber. For black see our #50-0049-22. Full slip-over type as original.Color:brown Width: 3.0 inches.

$67.00/pr.
In Stock
Brake and clutch floorplate

p/n: 18-0014-24

Floor plate, brake and clutch pedal. Metal core as original, exact copy. Black rubber. For brown rubber see our #18-0014-89.Length: 7.50 inches.

$66.90/ea.
Made to Order Takes 2-3 Days
Prop shaft retainer bushing

p/n: 70-2268-27

Retainer, intermediate bearing. All models with two piece driveshafts.

$66.40/ea.
In Stock
Rear spring bumper

p/n: 60-0137-32

Bumper, rear spring. Fits original retainer.Width: 2.5625 inches.

$66.40/pr.
In Stock
Brake and clutch pedal pad

p/n: 50-0049-22

Pad, brake and clutch pedal. Black rubber. For brown see our #50-0049-89. Full slip-over type as original.Width: 3.0 inches. Height: 2.75 inches.

$65.70/pr.
In Stock
Brown steering floorplate

p/n: 50-0260-89

Retainer, front floor mat on steering column (also called steering column floorplate). Brown rubber. For black see our #50-0260-36.

$65.70/ea.
Made to Order Takes 2-3 Days
Front stabilizer bushing

p/n: 70-0348-33

Bushings, front stabilizer bar mounting. Fully molded rubber. One and thirteen sixteenths inch (1 13/16") length by one and three eighths inch (1 3/8") width by eleven sixteenths inch (11/16") inside hole diameter by one and one half inch (1 1/2") height.

$65.70/pr.
In Stock
Carpet heel plate

p/n: 40-0087-88

Heel pad for carpet. Identical to original. Five and three fourths (5-3/4) inch by ten and one half (10-1/2) inch, to be stitched in place.Length: 10.

$65.30/ea.
In Stock
Sliding quarter window seal

p/n: 60-0398-78

Weatherstrip, sliding quarter window. Mounted vertically in body where leading edge of sliding window fits when closed. Right & left rubber only.

$65.30/pr.
In Stock
Windshield division bar gasket

p/n: 70-0309-51

Gaskets, windshield division channel, inner and outer, fully molded to include bolt holes and pilots. Two (2) piece set.

$65.30/set
In Stock
Brake and clutch pedal pad

p/n: 30-0188-22

Pads, brake and clutch pedal, slip over type. Black rubber only. For black and red (semi-automatic clutch models) see our #30-0188-89.Length: 3.875 inches.

$65.20/pr.
In Stock