Search Results

813 items found matching 1939
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Runningboard matting

p/n: 30-0449-49

Runningboard matting. Made from short wheel-base matting with extension pieces to make full length cover. This is a proven job, with a minimum of butting.

$1,124.00/pr.
Made to Order Takes 1-2 Days
Runningboard trim strip

p/n: 30-0450-49

Trim strips, stainless steel, with retaining clips (not sold separately).

$985.40/set
In Stock
Runningboard matting

p/n: 30-0428-49

Runningboard matting. Fully molded with crowned blocks. Top quality rubber, flawless detail. No splicing or butting required.

$936.80/pr.
In Stock
Runningboard matting

p/n: 50-0146-49

Matting, runningboard, original pattern with material to come down over ends and sides.

$868.80/pr.
Made to Order Takes 1-2 Days
Runningboard trim strip

p/n: 30-0396-49

Trim strips, stainless steel, with retaining clips.

$824.50/set
Made to Order Takes 2-3 Days
Vibration damper service

p/n: 30-0376-12

Vibration damper, crankshaft, front. Revulcanizing service for rubber cushion elements.

$705.30/ea.
Call or Email
Vibration damper service

p/n: 70-0638-12

Vibration damper (harmonic balancer), on front of crankshaft. May need rebalancing upon receipt.

$589.70/ea.
Call or Email
Runningboard matting

p/n: 20-2200-49

Covers, runningboard. Pre-molded.

$547.90/pr.
Ships in 3-4 Days
Call to order
Body Weatherstrip Kit

p/n: 90-3309-90

This ten (10) piece kit includes the major weatherstrip components and some other essential parts needed for your restoration project.

$550.30/set
$495.30/set
10% discount
Kit
Door weatherstrip

p/n: 70-0505-73

Weatherstrip, in door opening, lower half, right and left. Side, front and rear of door. Sold only in eight (8) piece set.

$424.20/set
In Stock
Motor mount service

p/n: 14-0050-11

Engine mount, rear. Revulcanization service only.Width: 7.50 inches.

$401.30/ea.
Call or Email
Detachable center post pad

p/n: 70-0273-67

Pads, upper and lower for removable center post, brass carcass as original. Four (4) piece set.Length: 3.125 inches.

$381.80/set
Made to Order Takes 2-3 Days
Runningboard matting

p/n: 20-2199-49

Covers, runningboard. Pre-molded.

$360.00/pr.
Ships in 3-4 Days
Detachable center post pad

p/n: 30-0261-67

Pad set, detachable center post, folding top upper and lower, right and left. Steel cores as original. 4 piece set.Width: 3.0 inches. Height: 2.75 inches.

$339.60/set
Made to Order Takes 2-3 Days
Suspension bushing

p/n: 30-0385-36

Bushing and pin assembly, cartridge, Inlox type, front wheel lower support arm inner pin. Shipped with instructions for re-installing.Length: 5.75 inches.

$334.60/pr.
In Stock
Front Door Vent Window Weatherstrips

p/n: 30-0089-55

These front door vent window seals are designed from the original parts for superior fitment and seal. The pieces are molded as left and right and are one piece with the division post seal.

$319.10/pr.
In Stock
Suspension bushing

p/n: 30-0386-36

Bushing and pin assembly cartridge. Inlox type, front wheel lower support arm inner pin. Shipped with instructions for reinstalling.Length: 5.75 inches.

$294.60/pr.
Made to Order Takes 2-3 Days
Rear Quarter Vent Weatherstrip

p/n: 30-0333-77

Weatherstrip, rear quarter vent window.

$271.30/pr.
In Stock
Quarter vent weatherstrip

p/n: 38-0075-76

Weatherstrip, quarter window vent. Includes division bar seals and run channel.

$270.60/set
Made to Order Takes 5 Days
Door - Upper Weatherstrip

p/n: 70-0063-73

Door - Upper Weatherstrip - The upper and inner door weatherstrip on the body. Hollow rubber seal, fits metal retainer as original. Set of four (4) strips, five (5) foot long per strip.

$264.40/set
In Stock
Detachable center post pad

p/n: 70-0295-67

Pads, detachable center post, upper and lower, steel core. One and nine sixteenths (1-9/16) inches by four and one fourth (4-1/4) inches. Four (4) piece set.

$262.50/set
Made to Order Takes 2-3 Days
Motor Mount

p/n: 70-0276-11

Front engine mount. Rubber and steel construction.

$261.40/pr.
In Stock
Side window run channel kit

p/n: 20-2210-58

Run channel and window-felt kit, door glass. Pre-bent beaded one-sided felt strip and lower metal channel with clips attached.

$257.90/set
Ships in 3-4 Days
Motor mount service

p/n: 30-0325-11

Motor mount (insulator assembly, support, rear), right and left. Revulcanization service only.

$255.10/pr.
Call or Email
Motor mount service

p/n: 30-0375-11

Insulator assembly, rear engine support at transmission housing. Revulcanization service only.

$255.10/pr.
Call or Email
Front Door Vent Window Kit

p/n: 90-0327-90

This front door vent window weatherstrip kit is a six (6) piece set that contains the upper and lower seals that cover the top, front, and bottom of the vent window as well as the division post seals. All of the pieces are designed from original parts for

$260.90/set
$247.90/set
5% discount
Kit
Detachable center post pad

p/n: 70-0445-66

Pads, detachable center post, upper and lower, right and left, brass core, four (4) piece set.Length: 4.375 inches. Width: 1.625 inches.

$246.70/set
In Stock
Torque ball mounting assembly

p/n: 50-0292-27

Mounting assembly, torque ball. Two (2) per car. Revulcanization service only.

$236.70/pr.
Call or Email
Fender light pad

p/n: 70-0684-16

Mounting pad, fender parking light. Two (2) per car.Length: 17.0 inches.

$236.20/pr.
Made to Order Takes 1-2 Days
Windshield Gasket

p/n: 40-0383-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

$233.10/ea.
Made to Order Takes 2-3 Days
Windshield Gasket Set

p/n: 70-1597-50

This windshield gasket set contains two (2) seals that mount around the perimeter's of both pieces of glass. It also has properly molded corners for a precise, factory fit.

$230.50/pr.
In Stock
Side Deflector Rubber

p/n: 70-0092-45

Side Deflector or Valence rubber. Approximately 6 ft. long.

$227.50/pr.
In Stock
Fluted radiator hose

p/n: 70-0603-31

Hose, cylinder head to radiator, upper. Fluted as original.Length: 10.125 inches.

$227.40/pr.
Made to Order Takes 1-2 Days
Windshield Gasket

p/n: 40-0379-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

$222.90/ea.
In Stock
Quarter vent weatherstrip

p/n: 70-1699-76

Weatherstrip, quarter window. Both sections, R & L, each made in one (1) strip to facilitate manufacturing. Must join two (2) ends together.

$220.20/pr.
In Stock
Quarter vent weatherstrip

p/n: 40-0182-76

Weatherstrip, quarter window. Both sections, R & L, each made into one (1) strip to facilitate manufacturing. Must join two (2) ends together. Minor modification required for some models.

$220.20/pr.
In Stock
Rear quarter vent weatherstrip

p/n: 30-0016-77

Weatherstrip, rear quarter vent window. Full swing type.

$217.50/pr.
In Stock
Front Door Vent Window Kit

p/n: 90-0326-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$225.60/set
$214.30/set
5% discount
Kit
Front Door Vent Window Weatherstrip Set

p/n: 30-0103-55

This front door vent window weatherstrip set is a four (4) piece set that contains the upper and lower seals that cover the top, front, and bottom of the vent window. All of the pieces are designed from original parts for a precise, factory fit.

$212.90/set
In Stock
Side window run channel kit

p/n: 90-0140-58

This eight (8) piece kit includes the inner and outer windowfelts, upper rigid run channels, and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models with vent windows in the door. Models with wood in the doors use our #70-1168-58 as lower rigid run channel.

$236.10/set
$212.50/set
10% discount
Kit
Prop shaft support

p/n: 70-2857-27

Insulator, propeller shaft center bearing housing. Two (2) required per car.

$210.60/pr.
Made to Order Takes 2-3 Days
Rear door vent weatherstrip

p/n: 10-0112-74

Weatherstrip, rear vent window, right and left, perfect copy.

$209.00/pr.
Made to Order Takes 1-2 Days
Front spring bumper

p/n: 70-0339-32

Bumper, front spring, upper arm on frame. Rubber with heavy steel core, including five sixteenths (5/16) inch stud.

$208.20/pr.
Made to Order Takes 2-3 Days
Windshield Gasket

p/n: 40-0381-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

$206.10/ea.
Made to Order Takes 2-3 Days
Rear door vent weatherstrip

p/n: 38-0012-74

Weatherstrip, rear door vent window. Note: we do not have a matching metal core division post seal for this part. Please order our part #70-0040-56 separately.

$206.00/pr.
In Stock
Front spring bushing

p/n: 30-0391-32

Bushing assembly, front wheel support; upper and outer. Inlox type cartridge bushing assembly.

$205.90/pr.
In Stock
Front Door Vent Window Kit

p/n: 90-0366-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$216.50/set
$205.70/set
5% discount
Kit
Front Door Vent Window Weatherstrips

p/n: 18-0026-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$201.70/pr.
In Stock
Front Door Vent Window Weatherstrips

p/n: 18-0007-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$201.70/pr.
In Stock
Windshield Gasket

p/n: 30-0280-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$199.00/ea.
In Stock