Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

102 items found matching 1939 Oldsmobile Series 70 - Model G 2 door Business Coupe
Side window run channel kit

p/n: 90-0140-58

This eight (8) piece kit includes the inner and outer windowfelts, upper rigid run channels, and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models with vent windows in the door. Models with wood in the doors use our #70-1168-58 as lower rigid run channel.

$227.59/set
Kit
Front Door Vent Window Kit

p/n: 90-0366-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$213.99/set
Kit
Front Door Vent Window Weatherstrips

p/n: 38-0016-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$175.59/pr.
In Stock
Motor mount service

p/n: 25-0065-11

Motor mount, rear. Revulcanization service only.1939-48: All 6 cylinder 1939-48: All 8 cylinder with hydramatic transmission (exc. 1948 Ser.

$174.29/pr.
Call or Email
Front Door weatherstrip

p/n: 90-0104-72

Door edge weatherstrip. This part is the primary door to body weatherstrip. Includes 22 ft (11ft per dr) of main door seal, 7ft (3.5 ft per dr bottom seal and 20 fastener clips for easy installation. Also includes instruction sheet. Made of top quality r

$165.99/set
In Stock
Windshield Gasket

p/n: 50-0216-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$145.89/ea.
In Stock
Rear Window Gasket

p/n: 60-0278-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$143.49/ea.
Made to Order Takes 2-3 Days
Rear Window Gasket

p/n: 60-0280-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$125.99/ea.
In Stock
Quarter window weatherstrip

p/n: 50-0282-77

Weatherstrip, fixed rear quarter window. Each vulcanized in one piece for ease of installation.

$119.59/pr.
In Stock
Windshield Gasket

p/n: 70-0535-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$117.49/ea.
In Stock
Motor mount service

p/n: 25-0077-11

Support, engine front lower. Revulcanization service only.

$108.79/ea.
Call or Email
Motor mount service

p/n: 25-0062-11

Motor mount, upper front at cross member. One (1) per car. Revulcanization service only.Length: 4.75 inches. Width: 2.25 inches.

$99.79/ea.
Call or Email
Accelerator pedal service

p/n: 25-0067-40

Accelerator pedal. Black rubber. For brown see our #25-0067-89. Revulcanization service only.Length: 10.125 inches.

$98.59/ea.
Call or Email
Trunk Weatherstrip

p/n: 70-1128-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$94.19/ea.
In Stock
Trunk Weatherstrip

p/n: 70-1129-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$85.99/ea.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Detachable center post pad

p/n: 70-0280-88

Pads, folding front seat rest, brass core. Also used as bumper, slat iron to compartment on convertibles.Width: 1.375 inches. Height: .28125 inches.

$77.29/pr.
In Stock
Brown accelerator service

p/n: 25-0067-89

Accelerator pedal. Brown rubber. For black see our #25-0067-40. Revulcanization service only.Color:brown Length: 10.125 inches.

$76.59/ea.
Call or Email
Torque ball boot

p/n: 25-0034-24

Cushion, propeller shaft (drive shaft) bearing.Height: 1.0625 inches.

$66.89/ea.
In Stock
Windshield division bar gasket

p/n: 70-0277-51

Gasket set, windshield center divider, inner and outer. Molded with pilots and screw holes, without steel core.

$65.29/set
In Stock
Fuel neck grommet

p/n: 70-0090-39

Grommet, fuel filler neck. Off center flange style. Fully molded rubber. Three and three fourths inch (3 3/4") outside width by three and seven eighths inch (3 7/8") outside length by two and three sixteenths inch (2 3/16") inside hole diameter by one an

$64.29/ea.
In Stock
Brown brake and clutch pad

p/n: 25-0024-89

Pads, brake and clutch pedal, authentic type ribbing, proper size, top quality rubber. Brown rubber. For black see our #25-0024-22.

$61.99/pr.
In Stock
Stabilizer Bar End Link Set

p/n: 70-0567-34

Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt. 5/16"-24NF x 7-5/8" long. Includes metal sleeves, cup washers and rubber grommets.

$61.99/set
In Stock
Trunk bumper

p/n: 50-0163-87

Bumper, trunk. Brass core, screw held. Two (2) per car.Length: 1.5 inches. Width: .75 inches.

$60.69/pr.
In Stock
Front Spring Rubber Bumper

p/n: 70-0329-32

Front Spring Rubber Bumper - for upper control arm on frame.

$60.59/pr.
In Stock
Brake and clutch pedal pad

p/n: 25-0024-22

Pads, brake and clutch pedal, authentic type ribbing, proper size, top quality rubber. Black rubber. For brown see our #25-0024-89.Length: 3.125 inches.

$60.19/pr.
In Stock
Fuel neck grommet

p/n: 70-0091-39

Grommet, fuel filler neck. Saddle style. Three and three eighths inch (3 3/8") outside width by three and five eighths inch (3 5/8") outside length by two and one fourth inch (2 1/4") inside hole diameter by one and one fourth inch (1 1/4") height.

$56.99/ea.
In Stock
Rear coil spring pad

p/n: 50-0359-35

Insulators, rear coil spring. Fabric reinforced rubber as original. One (1) pair per car.

$56.39/pr.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$54.29/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-0800-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$49.89/pr.
In Stock
Front stabilizer bushing

p/n: 50-0094-34

Bushings, front stabilizer shaft-to-frame or stabilizer shaft, front or rear. Fully molded rubber. One and one half inch (1 1/2") length by one and one half inch (1 1/2") width by eleven sixteenths inch (11/16") inside hole diameter by one and one half in

$48.39/pr.
In Stock
Flexible Run Channel

Cloth covered, mohair lined flexible metal channel for sides and top of door windows. Available in 5ft and 6ft lengths.

From $47.89/ea.
View
Beltline Weatherstrip

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 3ft pair and 6ft piece.

From $46.99/ea.
View
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Front suspension bumper

p/n: 50-0092-32

Bumper, front suspension, lower arm. Steel core, with threaded stud, as original. Two (2) per car required.

$46.19/ea.
Made to Order Takes 2-3 Days
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$42.29/ea.
In Stock
Cowl vent weatherstrip

p/n: 70-0143-54

Gasket, cowl vent. Perfect copy of original, not a sponge substitute, top quality material.

$41.49/ea.
In Stock
Starter pedal pad

p/n: 25-0049-89

Pad, starter pedal. Original pattern, brown rubber, exact copy.Height: .50 inches.

$28.29/ea.
In Stock
Windshield Division Bar Gasket

p/n: 70-0098-52

Gasket, divided windshield center post. Combines inner and outer gasket in one piece as original. For seventeen (17) inch to (20) inch lengths. Gasket length: 20 inches, trim to fit.

$26.69/ea.
In Stock
Door check link rod end stop

p/n: 70-0479-70

End nut, check link (rubber bar with steel bar insert). Three fourths (3/4) inch by three fourths (3/4) inch by two (2) inch threaded five sixteenths (5/16) inch. (For round stop nut, see our #70-0326-70).

$26.59/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$20.39/ea.
In Stock
Firewall grommet

p/n: 70-1876-20

Grommet, main wiring harness.

$19.99/ea.
Made to Order Takes 1-2 Days
Door Handle Ferrule

p/n: 60-0389-69

Ferrule, outside door handle. Chrome with rubber sleeve. Two (2) piece set includes one (1) chrome piece and one (1) rubber piece. Enough for one door.

$19.29/set
In Stock
Firewall grommet

p/n: 70-1877-20

Grommet, firewall. May be used on throttle, choke, oil gauge and others as needed. Up to six (6) required per vehicle.

$15.19/ea.
In Stock
Wiper transmission gasket

p/n: 70-1198-53

Gasket, windshield wiper transmission (1939-later type). Replaces #4097038.

$14.39/pr.
In Stock
Door check link rod end stop

p/n: 70-0326-70

End stop and pad, door check link rod. Rubber with embedded steel plate, five sixteenths (5/16) inch diameter thread. Most models with rod type door checks.

$13.99/ea.
In Stock