Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

92 items found matching 1940 Packard Standard Eight 4 door Convertible
Detachable center post pad

p/n: 30-0261-67

Pad set, detachable center post, folding top upper and lower, right and left. Steel cores as original. 4 piece set.Width: 3.0 inches. Height: 2.75 inches.

$346.49/set
Made to Order Takes 2-3 Days
Motor mount service

p/n: 30-0375-11

Insulator assembly, rear engine support at transmission housing. Revulcanization service only.

$260.29/pr.
Call or Email
Front Door Vent Window Weatherstrips

p/n: 30-0018-55

This front door vent window weatherstrip set is a four (4) piece set that contains the upper and lower seals that cover the top, front, and bottom of the vent window. All of the pieces are designed from original parts for a precise, factory fit.

$197.69/set
In Stock
Spring shackle bushing

p/n: 30-0344-32

Bushing, rear spring and shackle. One and one eighth (1-1/8) inch diameter with nine sixteenths (9/16) inch hole. One set contains twelve (12) pieces.

$159.79/set
In Stock
Side roof rail weatherstrip

p/n: 30-0031-65

Weatherstrip, side window. Fits metal channel. Rubber only. Twelve (12) foot strip.Length: 144.0 inches. Width: .75 inches.

$143.79/ea.
Made to Order Takes 3 Days
Front suspension bushing

p/n: 30-0239-32

Bushings, front suspension torque arm. Necessary for proper front end geometry.

$119.49/pr.
In Stock
Transmission mount service

p/n: 30-0316-24

Insulator assembly, transmission support. Revulcanization service only. Send in your old core for service.

$116.89/ea.
Call or Email
Detachable center post pad

p/n: 30-0423-67

Pad, convertible top right and left latches.Width: 3.0 inches. Height: 2.50 inches.

$111.79/pr.
Made to Order Takes 2-3 Days
Trunk Weatherstrip

p/n: 70-0083-85

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$106.39/ea.
In Stock
Axle rebound pad

p/n: 30-0371-32

Bumper, rear frame to axle rubber. Two (2) per car.Length: 5.1875 inches. Width: 2.0625 inches.

$103.89/pr.
In Stock
Front spring bumper

p/n: 30-0087-32

Pads, rebound, front spring. Self retaining type.

$92.49/pr.
In Stock
Hood corner pad

p/n: 30-0010-42

Pads, hood rear corners. High quality rubber with metal core as original.Length: 3.4375 inches. Width: 1.875 inches.

$88.19/pr.
In Stock
Accelerator pedal service

p/n: 30-0400-41

Pedal, accelerator. Revulcanization service only. Includes new ball sockets as original, with correctly detailed tread pattern.Length: 9.625 inches.

$87.29/ea.
Call or Email
Front spring bumper

p/n: 30-0120-32

Pads, front spring bumper rebound. Self retaining type.

$85.99/pr.
In Stock
Steering column grommet

p/n: 30-0348-36

Grommet, steering column at toe board.Length: 4.375 inches.

$84.49/ea.
In Stock
Rear bumper grommet

p/n: 30-0067-29

Grommets, rear bumper.Length: 4.3125 inches. Width: 2.6875 inches.

$82.29/pr.
Made to Order Takes 1-2 Days
Motor mount pad

p/n: 30-0238-11

Cushions, motor support, at timing gear cover. One (1) pair required per car. Sold only in pairs.

$81.49/pr.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Windshield division bar gasket

p/n: 30-0146-52

Gasket, windshield division bar. Molded inner and outer, fully detailed.Length: 13.625 inches.

$79.19/ea.
In Stock
Rigid run channel

p/n: 30-0245-57

Channel, rigid run, for division bar opposite vent windows.

$78.69/pr.
In Stock
Headlight door to lens seal

p/n: 30-0194-14

Gaskets, headlight rim (headlight door).

$76.49/pr.
In Stock
Red brake and clutch pedal pad

p/n: 30-0188-89

Pads, brake and clutch pedal, slip over type. Black and red rubber. For black only see our #30-0188-22.Length: 3.875 inches. Width: 2.875 inches.

$74.69/pr.
In Stock
Bumper grommet

p/n: 30-0039-28

Grommets, front or rear bumper. On models without trunk racks. Two (2) pair used per car if needing both front and rear bumpers. Three and five eighths inch (3-5/8") outside length by two and one fourth inch (2-1/4") outside width by one and five eighths

$72.99/pr.
In Stock
Prop shaft retainer bushing

p/n: 70-2268-27

Retainer, intermediate bearing. All models with two piece driveshafts.

$69.19/ea.
In Stock
Brake and clutch pedal pad

p/n: 30-0188-22

Pads, brake and clutch pedal, slip over type. Black rubber only. For black and red (semi-automatic clutch models) see our #30-0188-89.Length: 3.875 inches.

$67.89/pr.
In Stock
Convertible post bumper

p/n: 70-1844-67

Bumper, convertible top pillar.Width: 1.9375 inches.

$66.89/pr.
Made to Order Takes 1-2 Days
Suspension bushing

p/n: 30-0335-36

Bushing, insulator, torque arm to frame at rear. Four (4) piece set.

$63.89/set
In Stock
Suspension bushing

p/n: 30-0339-36

Bushing, insulator, front suspension lower support arm, inner. Four (4) piece set.

$63.89/set
Made to Order Takes 1-2 Days
Door bumper

p/n: 34-0305-71

Bumper assembly, front door hinge, upper, stop. Two (2) per car, steel core as original.Height: .6875 inches.

$59.79/pr.
In Stock
Hood corner pad

p/n: 30-0037-42

Pads, hood front corner. Metal core, retained by single rivet.Length: 1.75 inches. Width: 1.375 inches.

$59.39/pr.
In Stock
Taillight mounting pad

p/n: 30-0318-15

Gaskets, taillight mounting, with proper beading and shape as original. For all models with center license mounting.Length: 7.125 inches.

$59.39/pr.
In Stock
Suspension bushing

p/n: 30-0341-36

Bushing, insulator, upper support arm, outer above steering knuckle support. Four (4) piece set.

$58.89/set
In Stock
Front stabilizer bushing

p/n: 30-0123-33

Bushings, front stabilizer mounting bracket. Fully molded rubber. One and seven sixteenths inch (1 7/16") length by one and five eighths inch (1 5/8") width by five eighths inch (5/8") inside hole diameter by one and eleven sixteenths inch (1 11/16") heig

$56.59/pr.
In Stock
Cowl vent gasket

p/n: 30-0050-54

Gasket, cowl vent. Perfect reproduction, high quality, original configuration, not a sponge substitute.Length: 14.0 inches. Width: 5.75 inches.

$55.79/ea.
In Stock
Handbrake pull rubber grip

p/n: 30-0322-24

Rubber grip, handbrake lever.Length: 4.125 inches.

$55.49/ea.
In Stock
Firewall grommet

p/n: 30-0070-21

Grommet instrument board cables through firewall. Oval type with masked hole for six (6) wires or cables. Necessary replacement for correct restoration.

$54.99/ea.
In Stock
Fuel neck grommet

p/n: 30-0038-41

Grommet, fuel filler neck.

$54.99/ea.
In Stock
Motor snubber pad

p/n: 30-0311-11

Insulator, engine snubber. One four (4) piece set required per car. Sold only in complete sets.

$52.89/set
In Stock
Clutch control boot

p/n: 30-0273-24

Boot, clutch control unit governor.1940-42: Cars with Overdrive 1941-42: Cars with ElectromaticHeight: 1.125 inches.

$52.19/ea.
In Stock
Windshield filler

p/n: 30-0105-52

Filler, windshield division channel ends, upper and lower. Two (2) piece set.

$50.19/set
Made to Order Takes 1-2 Days
Brake and clutch shank seal

p/n: 30-0143-24

Boot, brake and clutch pedal shank at toe board.Length: 2.9375 inches.

$48.59/pr.
In Stock
Beltline Weatherstrip

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 3ft pair and 6ft piece.

From $46.99/ea.
View
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Detachable center post pad

p/n: 30-0422-67

Pad, convertible top center latch. Excellent workmanship with metal insert like originalWidth: 2.0 inches. Height: 1.1875 inches.

$43.69/ea.
Made to Order Takes 2-3 Days
License light mounting pad

p/n: 30-0521-17

Pad, license light assembly to body.Length: 5.25 inches.

$41.79/ea.
Made to Order Takes 1-2 Days
Side mount cover pad

p/n: 30-0518-37

Pad, side mount covers. Six (6) piece set.Length: 2.50 inches.

$41.59/set
In Stock