Search Results

108 items found matching 1940 Pontiac Deluxe Series 28 2 door Sedan - 5 Passenger
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Side window run channel kit

p/n: 90-0141-58

This ten (10) piece kit includes the inner and outer windowfelts, upper and lower rigid run channels, and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models with vent windows in the door.

$272.20/set
$245.00/set
10% discount
Kit
Front Door Vent Window Kit

p/n: 90-0367-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$185.30/set
$176.00/set
5% discount
Kit
Front Door Vent Window Weatherstrips

p/n: 38-0016-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$170.40/pr.
In Stock
Windshield Gasket

p/n: 50-0204-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$159.50/ea.
In Stock
Gravel shield

p/n: 27-0065-44

Stone shield, front fender. Molded left and right.Length: 12.125 inches.

$132.40/pr.
Made to Order Takes 1-2 Days
Front OR Rear Door Weatherstrip

p/n: 90-0128-72

Door weatherstrip. This set is the primary seal for the door to the body. Set contains two (2) seals for either the front or rear doors. Purchase two (2) sets if you need to complete all four (4) doors.

$128.50/set
In Stock
Motor mount service

p/n: 27-0044-11

Insulator, engine support rear, right and left. For models with a manual transmission. Revulcanization service only.

$127.80/pr.
Call or Email
Rear Window Gasket

p/n: 60-0280-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$122.30/ea.
In Stock
Motor mount service

p/n: 27-0039-11

Insulator, engine support front. One (1) per car. Revulcanization service only.Length: 5.625 inches.

$104.10/ea.
Call or Email
Trunk Weatherstrip

p/n: 70-0083-85

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$103.20/ea.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Accelerator pedal service

p/n: 27-0088-40

Accelerator pedal. Revulcanization service only.Length: 10.125 inches.

$72.30/ea.
Call or Email
Fenderskirt edge seal

p/n: 70-0055-45

Seal, fenderskirt edge. Each five (5) foot long. Similar to our #20-0111-44, but thicker.Length: 60.0 inches. Width: .25 inches.

$71.90/pr.
In Stock
Taillight mounting pad

p/n: 27-0022-15

Pad, taillight mounting, right and left.Length: 6.75 inches.

$71.90/pr.
In Stock
Axle rebound pad

p/n: 70-0210-32

Bottoming pads, rear axle. Rubber block mounts by bracket to rear axle tube.

$70.40/pr.
In Stock
Front bumper grommet

p/n: 27-0054-28

Grommet, front bumper. Fully molded rubber, detailed and flanged as original. Four and one fourth inch (4-1/4") outside length by two and seven sixteenths inch (2-7/16") outside width. One and three fourths inch (1-3/4") inside hole length by nine sixteen

$67.50/pr.
In Stock
Front bumper grommet

p/n: 27-0018-28

Grommet, front bumper. Fully detailed and flanged as original. Fully molded rubber. Three and three fourths inch (3-3/4") outside length by two and three sixteenths inch (2-3/16") outside width by one and nine sixteenths inch (1-9/16") inside hole length

$64.20/pr.
In Stock
Fuel neck grommet

p/n: 70-0090-39

Grommet, fuel filler neck. Off center flange style. Fully molded rubber. Three and three fourths inch (3 3/4") outside width by three and seven eighths inch (3 7/8") outside length by two and three sixteenths inch (2 3/16") inside hole diameter by one an

$61.70/ea.
In Stock
Brown brake and clutch pad

p/n: 25-0024-89

Pads, brake and clutch pedal, authentic type ribbing, proper size, top quality rubber. Brown rubber. For black see our #25-0024-22.

$59.50/pr.
In Stock
Front Stablizer Bar End Link Kit

p/n: 70-0567-34

Kit, stabilizer bar link assembly. Twenty two (22) piece set for both sides of one (1) car, front and rear. (Order 2 sets if you need both). Hex head bolt. 5/16"-24nf x 7-5/8" lg. Comes with metal sleeve, cup washers and rubber grommets.

$59.50/set
In Stock
Front Spring Rubber Bumper

p/n: 70-0329-32

Front Spring Rubber Bumper - for upper control arm on frame.

$58.20/pr.
In Stock
Brake and clutch pedal pad

p/n: 25-0024-22

Pads, brake and clutch pedal, authentic type ribbing, proper size, top quality rubber. Black rubber. For brown see our #25-0024-89.Length: 3.125 inches.

$57.80/pr.
In Stock
Brown seat back rest pad

p/n: 70-0482-89

Rest pads, seat back, outer, on two (2) door styles with folding seats. Brown rubber. For black see our #70-0482-88. Self retaining, perfect copy.

$52.40/pr.
In Stock
Headlight Door To Lens Seal

p/n: 70-0493-14

Headlight Door To Lens Seal - Molded without wire. Double lip type for sealed beam headlights. Note: Compare with our single lip type #70-0389-14 sold separately.

$52.10/pr.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Channel, rigid run, window division bar. Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar.

$52.10/pr.
In Stock
Front stabilizer bushing

p/n: 27-0057-34

Bushing, front stabilizer bar to frame. Two (2) per car.

$50.20/pr.
In Stock
Flexible Run Channel 6 Foot

p/n: 70-1239-58

Window run channel with stainless beaded edge. Six (6) foot length. Cloth covered, mohair lined, flexible channel for sides and top of door windows. Exact replacement for listed vehicles but can be used in many applications.

$48.20/ea.
In Stock
Beltline weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Seven sixteenths (7/16) inch wide, with chrome bead, mohair faced, flexible. Two (2) three (3) foot strips. Bend to fit.

$47.70/pr.
In Stock
Folding seat bumper

p/n: 70-0482-88

Rest pads, seat back, outer, on two (2) door styles with folding seats. Black rubber. For brown see our #70-0482-89. Self retaining, perfect copy.

$46.90/pr.
In Stock
Headlight Door To Lens Seal

p/n: 70-0389-14

Headlight door to lens seal. Molded without wire. Single lip type for sealed beams.

$46.40/pr.
In Stock
License light mounting pad

p/n: 27-0021-17

Pad, rear license light body.Length: 6.6875 inches.

$46.20/ea.
Made to Order Takes 1-2 Days
Flexible Run Channel 5 Foot

p/n: 70-1238-58

Window run channel, stainless beaded edge. Cloth covered, mohair lined flexible metal channel for sides and top of door windows. Perfect dimensions, Five eighths (5/8) inch wide by nine sixteenths (9/16) inch overall height, exact replacement. Five (5) fo

$44.30/ea.
In Stock
Brown steering column grommet

p/n: 27-0047-89

Grommet, steering column at toe board. Brown rubber.Color:brown Length: 3.50 inches.

$43.80/ea.
Made to Order Takes 1-2 Days
Sliding Quarter Window Weatherstrip

p/n: 70-0353-78

Weatherstrip, inner and outer for sliding quarter window, chrome beaded, mohair faced, flexible stock. May be formed to required outline. Six (6) foot strip.

$43.50/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Front suspension bumper

p/n: 50-0092-32

Bumper, front suspension, lower arm. Steel core, with threaded stud, as original. Two (2) per car required.

$42.70/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
Headlight Mounting Pad

p/n: 70-0201-14

Headlight body mounting gasket. Rubber.

$41.10/pr.
In Stock
Horn button contact cushion

p/n: 50-0409-21

Separator, horn contact. For standard or non-flexible wheel.

$41.10/ea.
In Stock
Trunk hinge mounting pad

p/n: 27-0019-87

Mounting pad, trunk hinge.

$41.00/pr.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$39.10/ea.
In Stock
Cowl vent weatherstrip

p/n: 70-0143-54

Gasket, cowl vent. Perfect copy of original, not a sponge substitute, top quality material.

$38.30/ea.
In Stock
Rigid run channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining, one half (1/2) inch deep by one half (1/2) inch wide, fifteen (15) inches long.

$36.10/pr.
In Stock
Brake master cylinder boot

p/n: 60-0180-24

Boot, brake master cylinder rod. Fits on one and one fourth (1-1/4) inch diameter cylinder. Height: 2.125 inches.

$27.60/ea.
In Stock
Starter pedal pad

p/n: 25-0049-89

Pad, starter pedal. Original pattern, brown rubber, exact copy.Height: .50 inches.

$26.10/ea.
In Stock
Battery carrier edge liner

p/n: 27-0091-21

Seal strip, battery to fender apron. Two (2) correct cross section strips nineteen (19) inches long.

$25.30/set
In Stock
Windshield division bar gasket

p/n: 70-0098-52

Gasket, divided windshield center post. Combines inner and outer gasket in one piece as original. Seventeen (17) inch to (20) inch lengths.Length: 20.

$24.60/ea.
In Stock
Door check link rod end stop

p/n: 70-0479-70

End nut, check link (rubber bar with steel bar insert). Three fourths (3/4) inch by three fourths (3/4) inch by two (2) inch threaded five sixteenths (5/16) inch. (For round stop nut, see our #70-0326-70).

$24.50/ea.
In Stock
Rear Spring Pad

p/n: 70-0191-32

Pad, rear spring insulator for two (2) inch wide springs. (see our number 70-0245-32 for two and one fourth (2-1/4) inch springs). Cloth reinforced. Four (4) per vehicle.

$23.90/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Door Handle Ferrule

p/n: 60-0389-69

Ferrule, outside door handle. Chrome with rubber sleeve. Two (2) piece set includes one (1) chrome piece and one (1) rubber piece. Enough for one door.

$17.80/set
In Stock
Firewall grommet

p/n: 70-0158-21

Grommet for ignition switch conduit through firewall.

$15.70/ea.
In Stock
Vent Window Division Bar Weatherstrip

p/n: 70-0040-56

Vent window division post seal. Extruded thirty (30") inch rubber strip that may have to be glued to your old original division post seal core, or directly to the division post.

$14.90/ea.
In Stock
Wiper transmission gasket

p/n: 70-1198-53

Gasket, windshield wiper transmission (1939-later type). Replaces #4097038.

$13.20/pr.
In Stock
Door check link rod end stop

p/n: 70-0326-70

End stop and pad, door check link rod. Rubber with embedded steel plate, five sixteenths (5/16) inch diameter thread. Most models with rod type door checks.

$13.00/ea.
In Stock
Firewall grommet

p/n: 27-0026-20

Firewall grommet for control cables, tubes and wires. Two (2) hole type, for three fourths (3/4) inch by one and five sixteenths (1-5/16) inch hole.

$11.80/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Door lock mounting pad

p/n: 27-0020-69

Mounting pad, door lock cylinder, right and left.Length: 1.6875 inches.

$9.10/pr.
In Stock
Door bumper

p/n: 34-0025-42

Bumper, front and rear body hinge pillar, one (1) inch diameter by one fourth (1/4) inch thick, held by screw, steel core. Auxiliary, used only where needed to prevent door rattle.Note: also used on 1942-50 Packards with Clipper styling near t

$7.90/ea.
In Stock
Door Handle Grommet

p/n: 70-0177-69

Grommet for outside door handle bezel.

$7.90/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$7.80/ea.
In Stock
Door check link rod end stop

p/n: 70-0384-70

Rubber washer, door check link stop.

$7.70/ea.
In Stock
Door bumper

p/n: 34-0131-37

Bumper, front door above the upper hinge on the upper radius of the door. Stiff-backed, retained by screw, mounted on door only.

$7.40/ea.
In Stock
Side window roller

p/n: 70-0117-62

Anti-rattle roller, side windows. Rubber only, replaces original perfectly and easily. Fits both styles of brackets.

$7.30/ea.
In Stock
Spark plug grommet

p/n: 70-1181-21

Grommet, spark plug and coil wire at distributor cap outlets. For seven (7mm) millimeter, later years.

$7.20/ea.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.00/ea.
In Stock
Trunk Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0412-85

Trunk weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$6.90/ft.
In Stock
Spark plug grommet

p/n: 70-1180-21

Grommet, spark plug & coil wire at distributor cap outlets. For nine (9mm) millimeter wire, earlier years.

$6.80/ea.
In Stock
Steering knuckle support seal

p/n: 50-0199-35

Seal, steering knuckle support, upper pivot pin. Four (4) required per car.Height: .5 inches.

$6.50/ea.
In Stock
Brown door lock knob

p/n: 70-0354-70

Knob for inside door lock control rod. Neutral brown color rubber, 3/32 inch hole. See also our #70-0660-70.

$6.30/ea.
In Stock
Door check link rod end stop

p/n: 70-0325-70

Pad, door check link. For rod type door check. One (1) inch diameter by three eighths (3/8) inch thick with five sixteenths (5/16) inch hole.

$6.10/ea.
In Stock
Peel-N-Stick Door Edge Weatherstrip

p/n: 70-0390-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of door weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$6.10/ft.
In Stock
Sun visor end plug

p/n: 70-0330-89

End plug, swing-type sun visor tube. Brown only.

$6.10/ea.
In Stock
Brake cable anti-rub cover

p/n: 70-1701-24

Anti-rub cover, brake cable. Fits all models with seven sixteenths (7/16) inch outside diameter cable.Width: 2.0 inches.

$5.90/ea.
In Stock
Pressure ring

p/n: 70-0261-69

Pressure ring (washer), sponge rubber, interior door handle and window regulator escutcheon. One and three fourths (1-3/4) inches outside diameter by three eighths (3/8) inch thick.

$5.90/ea.
In Stock
Channel filler weatherstrip

p/n: 70-0075-57

Channel pad, window carrier, incorporating weatherstrip. Used for some side window lower channel.Width: .375 inches. Height: .6875 inches.

$5.80/ft.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0390-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.80/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Peel-N-Stick Door Weatherstrip

p/n: 70-0331-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of door weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$5.60/ft.
In Stock
Spring shackle seal

p/n: 70-1125-33

Washer, front and rear spring shackle, seal for shackle pin. Constructed of neoprene.

$5.60/ea.
In Stock
Windshield Weatherstrip

p/n: 70-1190-52

Channel, windshield, for windows without chrome reveal molding. (With 2 piece windshield, select gasket for division bar).

$5.50/ft.
In Stock
Channel filler weatherstrip

p/n: 70-0489-58

Weatherstrip, channel filler, door window sash channel and some quarter window sash channel. Special type with wide weatherstrip edge to be trimmed at assembly, when necessary.

$5.49/ft.
In Stock
Channel filler weatherstrip

p/n: 70-0241-57

Weatherstrip, side window, double-lip seal type, used as filler for one fourth (1/4) inch glass in metal carrier channel.Width: .375 inches. Height: .

$5.40/ft.
In Stock
Window weatherstrip

p/n: 70-1192-52

Gasket, window, for models with chrome reveal molding.

$5.40/ft.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0331-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.30/ft.
In Stock
Peel-N-Stick Door Weatherstrip

p/n: 70-0145-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Excellent for use in many different applications and on many different vehicle models.

$5.30/ft.
In Stock
Glovebox link bumper

p/n: 70-1459-88

Bumper, glove box check link. Fits on glove box door arm as needed.Length: .75 inches. Width: .3125 inches. Height: .4375 inches.

$5.10/ea.
In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0145-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.00/ft.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Trunk floor pan plug

p/n: 35-0402-87

Plug, trunk floor pan construction holes, also rest pad for spare wheel area.

$4.20/ea.
In Stock
Shock absorber bushing

p/n: 70-0541-33

Bushing, shock absorber mounting. Five eighths (5/8) inch hole, one and one fourth (1-1/4) inch outside diameter, five eighths (5/8) inch thick.

$4.10/ea.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Side window weatherstrip

p/n: 70-0079-58

Weatherstrip, side window lower edge, retained in metal flap on side of carrier channel, seals out water when window is cranked up.Width: .375 inches.

$3.40/ft.
In Stock
Gearshift bushing

p/n: 32-0051-24

Insulator (bushing). Gearshift selector rod. Sheet Metal Hole: 9/16" Center Hole: 3/8" Outside Diameter: 5/8" Slot Width: 5/32"

$3.30/ea.
In Stock