Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

96 items found matching 1941 Packard Six 2 door Convertible
Motor mount service

p/n: 30-0375-11

Insulator assembly, rear engine support at transmission housing. Revulcanization service only.

$260.29/pr.
Call or Email
Front Door Vent Window Kit

p/n: 90-0330-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$239.19/set
Kit
Windshield Gasket

p/n: 30-0281-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$204.99/ea.
Made to Order Takes 2-3 Days
Windshield Gasket

p/n: 30-0280-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$204.99/ea.
Made to Order Takes 2-3 Days
Front Door Vent Window Weatherstrips

p/n: 30-0269-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$199.99/pr.
In Stock
Front Door Vent Window Weatherstrips

p/n: 30-0018-55

This front door vent window weatherstrip set is a four (4) piece set that contains the upper and lower seals that cover the top, front, and bottom of the vent window. All of the pieces are designed from original parts for a precise, factory fit.

$197.69/set
In Stock
Spring shackle bushing

p/n: 30-0344-32

Bushing, rear spring and shackle. One and one eighth (1-1/8) inch diameter with nine sixteenths (9/16) inch hole. One set contains twelve (12) pieces.

$159.79/set
In Stock
Side roof rail weatherstrip

p/n: 30-0031-65

Weatherstrip, side window. Fits metal channel. Rubber only. Twelve (12) foot strip.Length: 144.0 inches. Width: .75 inches.

$143.79/ea.
In Stock
Axle rebound pad

p/n: 30-0125-32

Bumpers, rear axle spring.Length: 5.375 inches. Width: 2.75 inches. Height: 2.1875 inches.

$118.39/pr.
Made to Order Takes 1-2 Days
Convertible top arm pad

p/n: 30-0440-67

Pad, convertible top to windshield post. Molded left and right hand with metal core just like originalWidth: 2.125 inches. Height: 3.0 inches.

$117.99/pr.
Made to Order Takes 2-3 Days
Transmission mount service

p/n: 30-0316-24

Insulator assembly, transmission support. Revulcanization service only. Send in your old core for service.

$116.89/ea.
Call or Email
Steering column grommet

p/n: 30-0048-36

Grommet, steering column to instrument panel. Brown rubber only, excellent copy.Length: 5.0 inches. Width: 3.0 inches.

$107.59/ea.
In Stock
Parking light mounting pad

p/n: 30-0195-17

Gaskets, front parking light to fender.Length: 19.875 inches.

$99.89/pr.
In Stock
Convertible top arm pad

p/n: 30-0441-67

Pad, convertible top to lock pillar. Molded left and right hand with metal core just like original.Width: 1.875 inches. Height: 1.625 inches.

$96.69/pr.
Made to Order Takes 2-3 Days
Accelerator pedal service

p/n: 30-0401-41

Pedal, accelerator. Revulcanization service only. Includes new rod ball socket and pivot. Original pattern tread.Length: 9.625 inches. Width: 1.9375 inches.

$93.99/ea.
Call or Email
Front spring bumper

p/n: 30-0120-32

Pads, front spring bumper rebound. Self retaining type.

$85.99/pr.
In Stock
Front bumper grommet

p/n: 30-0071-28

Grommets, front bumper. Proper hollow construction as original for good fit. Fully molded rubber. Five and one eighths inch (5-1/8") outside length by two and three eighths inch (2-3/8") outside width by one and five eighths inch (1-5/8") inside hole leng

$85.49/pr.
Made to Order Takes 1-2 Days
Steering column grommet

p/n: 30-0348-36

Grommet, steering column at toe board.Length: 4.375 inches.

$84.49/ea.
In Stock
Motor mount pad

p/n: 30-0238-11

Cushions, motor support, at timing gear cover. One (1) pair required per car. Sold only in pairs.

$81.49/pr.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Windshield division bar gasket

p/n: 30-0146-52

Gasket, windshield division bar. Molded inner and outer, fully detailed.Length: 13.625 inches.

$79.19/ea.
In Stock
Rigid Run Channel

p/n: 30-0245-57

Channel, rigid run, for division bar opposite vent windows.

$78.69/pr.
In Stock
Headlight door to lens seal

p/n: 30-0194-14

Gaskets, headlight rim (headlight door).

$76.49/pr.
In Stock
Heel plate

p/n: 70-3608-88

Heel plate to protect driver's side floor carpet. Identical to original. Only for models with carpet.

$74.99/ea.
Made to Order Takes 1-2 Days
Gravel shield

p/n: 30-0007-44

Gravel deflector, underside of runningboard at rear.Length: 7.125 inches.

$74.79/pr.
Made to Order Takes 1-2 Days
Red brake and clutch pedal pad

p/n: 30-0188-89

Pads, brake and clutch pedal, slip over type. Black and red rubber. For black only see our #30-0188-22.Length: 3.875 inches. Width: 2.875 inches.

$74.69/pr.
In Stock
Hood to cowl weatherstrip

p/n: 30-0049-42

Scuff pad, hood to cowl. Superior duplication of part with better rubber than original.Length: 8.25 inches.

$72.39/pr.
Made to Order Takes 2-3 Days
Prop shaft retainer bushing

p/n: 70-2268-27

Retainer, intermediate bearing. All models with two piece driveshafts.

$69.19/ea.
In Stock
Brake and clutch pedal pad

p/n: 30-0188-22

Pads, brake and clutch pedal, slip over type. Black rubber only. For black and red (semi-automatic clutch models) see our #30-0188-89.Length: 3.875 inches.

$67.89/pr.
In Stock
Taillight mounting pad

p/n: 30-0303-15

Gaskets, taillight assembly mounting. Molded left and right as originalLength: 10.25 inches.

$66.19/pr.
Made to Order Takes 1-2 Days
Headlight mounting pad

p/n: 30-0354-14

Gasket, headlight front assembly to fender. Between headlight bucket and the fender receiver hole. One (1) pair per car, sold only in pairs.

$65.19/pr.
In Stock
Fenderskirt edge seal

p/n: 20-0111-44

Pad, fenderskirt edge, similar to our #70-0055-45, but thinner. Approximately five (5) foot strip per skirt.Length: 60.0 inches. Width: .15625 inches.

$64.89/pr.
In Stock
Suspension bushing

p/n: 30-0339-36

Bushing, insulator, front suspension lower support arm, inner. Four (4) piece set.

$63.89/set
In Stock
Suspension bushing

p/n: 30-0335-36

Bushing, insulator, torque arm to frame at rear. Four (4) piece set.

$63.89/set
In Stock
Door bumper

p/n: 34-0305-71

Bumper assembly, front door hinge, upper, stop. Two (2) per car, steel core as original.Height: .6875 inches.

$59.79/pr.
In Stock
Suspension bushing

p/n: 30-0341-36

Bushing, insulator, upper support arm, outer above steering knuckle support. Four (4) piece set.

$58.89/set
In Stock
Front stabilizer bushing

p/n: 30-0123-33

Bushings, front stabilizer mounting bracket. Fully molded rubber. One and seven sixteenths inch (1 7/16") length by one and five eighths inch (1 5/8") width by five eighths inch (5/8") inside hole diameter by one and eleven sixteenths inch (1 11/16") heig

$56.59/pr.
In Stock
Cowl vent gasket

p/n: 30-0050-54

Gasket, cowl vent. Perfect reproduction, high quality, original configuration, not a sponge substitute.Length: 14.0 inches. Width: 5.75 inches.

$55.79/ea.
In Stock
Firewall grommet

p/n: 30-0070-21

Grommet instrument board cables through firewall. Oval type with masked hole for six (6) wires or cables. Necessary replacement for correct restoration.

$54.99/ea.
In Stock
Motor snubber pad

p/n: 30-0311-11

Insulator, engine snubber. One four (4) piece set required per car. Sold only in complete sets.

$52.89/set
Made to Order Takes 1-2 Days
Clutch control boot

p/n: 30-0273-24

Boot, clutch control unit governor.1940-42: Cars with Overdrive 1941-42: Cars with ElectromaticHeight: 1.125 inches.

$52.19/ea.
In Stock
Vent division bar weatherstrip

p/n: 30-0530-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$51.89/pr.
In Stock
Beltline Weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 3ft pair.

$51.59/pr.
In Stock
Gravel shield anti-squeak

p/n: 30-0399-29

Mute, bumper gravel shield. Fully molded rubber. Three and seven sixteenths inch (3-7/16") length by three fourths inch (3/4") width by one and one fourth inch (1-1/4") height.

$49.29/pr.
In Stock
Brake and clutch shank seal

p/n: 30-0143-24

Boot, brake and clutch pedal shank at toe board.Length: 2.9375 inches.

$48.59/pr.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock