Search Results

151 items found matching 1942 Cadillac Series 75 4 door Limousine
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Side window run channel kit

p/n: 90-0141-58

This ten (10) piece kit includes the inner and outer windowfelts, upper and lower rigid run channels, and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models with vent windows in the door.

$272.20/set
$245.00/set
10% discount
Kit
Windshield Gasket

p/n: 50-0175-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$198.70/ea.
In Stock
Motor Mount

p/n: 70-0529-11

Front motor mount. Revulcanizing core exchange only. Send your cores when ordering.

$184.20/pr.
Call or Email
Front fender dust shield seal

p/n: 70-0581-45

Seal, front fender dust shield-to-radiator air deflector, right and left, molded sponge.

$174.70/pr.
In Stock
Side window run channel kit

p/n: 90-0142-58

This six (6) piece kit includes the inner and outer windowfelts and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models without vent windows in the door.

$191.80/set
$172.60/set
10% discount
Kit
Hood to cowl weatherstrip

p/n: 70-1208-42

Weatherstrip, hood to cowl. To facilitate manufacturing, some may be made in two sections.

$169.60/ea.
In Stock
Taillight mounting pad

p/n: 70-1212-15

Pads, taillight mounting. Compound curved right and left hand custom molded pads. Also order the special design weatherproof gaskets for the lenses our #70-1213-15.

$163.40/pr.
In Stock
Front Door Vent Window Kit

p/n: 90-0340-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$165.10/set
$156.80/set
5% discount
Kit
Front Door Vent Window Weatherstrips

p/n: 38-0008-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$150.20/pr.
In Stock
Rear Window Gasket

p/n: 70-0580-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$130.60/ea.
In Stock
Front OR Rear Door Weatherstrip

p/n: 90-0128-72

Door weatherstrip. This set is the primary seal for the door to the body. Set contains two (2) seals for either the front or rear doors. Purchase two (2) sets if you need to complete all four (4) doors.

$128.50/set
In Stock
Motor mount service

p/n: 70-0629-11

Cushion support, motor, rear on transmission to cross member. Revulcanization service only. Similar to #70-0674-11.Length: 3.75 inches. Width: 2.25 inches.

$126.30/ea.
Call or Email
Rear Window Gasket

p/n: 70-0687-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$111.90/ea.
In Stock
Front Stablizer Bar End Link Kit

p/n: 70-0574-33

Kit, front stabilizer bar link assembly replacement. Twenty two (22) piece set for both sides of one (1) car. Hex head bolt. 3/8"-16nc x 8-7/8" lg. Comes with metal sleeve, metal cup washers and rubber grommets.

$111.60/set
In Stock
License light mounting pad

p/n: 70-1221-17

Pad set, license light mount and lens gasket.Length: 12.625 inches.

$101.00/set
In Stock
Coil spring insulator pad

p/n: 70-0801-32

Pad, coil spring insulator. Molded four (4) piece set for one (1) car.

$100.60/set
In Stock
Rear window division bar seal

p/n: 70-0414-82

Pad set, back window division bar. Molded with screw clearances. Four (4) piece set.

$100.10/set
Made to Order Takes 1-2 Days
Front spring bumper

p/n: 70-0172-32

Bumpers, front spring. Lower arm, original copy, integral molded plate and stud, three eighths (3/8) inch standard thread, for installing.

$100.00/pr.
In Stock
Trunk Weatherstrip

p/n: 70-0988-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$91.80/ea.
In Stock
Rigid run channel

p/n: 70-0536-58

Run channel, front door window, for full length of division bar (approximately twenty nine (29) inches). Rigid, bright beaded edge, mohair lined channel, die trimmed and formed at top.

$85.50/pr.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Front spring bumper

p/n: 70-0171-32

Bumper, front spring, upper arm (on frame).

$75.60/pr.
In Stock
Brown accelerator pedal pad

p/n: 70-0208-89

Pad, accelerator pedal. Brown rubber. For black see our #70-0208-40. Made to slip over old metal core after removing old rubber.

$71.90/ea.
Made to Order Takes 1-2 Days
Fenderskirt edge seal

p/n: 70-0055-45

Seal, fenderskirt edge. Each five (5) foot long. Similar to our #20-0111-44, but thicker.Length: 60.0 inches. Width: .25 inches.

$71.90/pr.
In Stock
Axle rebound pad

p/n: 70-0210-32

Bottoming pads, rear axle. Rubber block mounts by bracket to rear axle tube.

$70.40/pr.
In Stock
Stabilizer bushing

p/n: 70-0627-33

Bushings, stabilizer bar, front. Fully molded rubber. One and three fourths inch (1 3/4") length by one and one half inch (1 1/2") width by three fourths inch (3/4") inside hole diameter by one and five eighths inch (1 5/8") height.

$70.10/pr.
In Stock
Fenderskirt edge seal

p/n: 20-0111-44

Pad, fenderskirt edge, similar to our #70-0055-45, but thinner. Approximately five (5) foot strip per skirt.Length: 60.0 inches. Width: .15625 inches.

$62.30/pr.
In Stock
Division bar grommet

p/n: 70-0483-62

Grommets, rear door vent divider post (wind deflector), upper and lower, right and left. Four (4) piece set.

$60.90/set
In Stock
Brown brake and clutch pad

p/n: 70-0176-89

Pads, brake and clutch pedals. Brown rubber. For black see our #70-0176-22.Color:brown Length: 3.8125 inches.

$60.40/ea.
In Stock
Gravel shield anti-squeak

p/n: 70-0462-45

Seal, rear gravel deflector to bumper face bar (staples to gravel deflector), three thirty seconds (3/32) inches by one and three fourths (1-3/4) inch

$59.20/ea.
In Stock
Accelerator pedal pad

p/n: 70-0208-40

Pad, accelerator pedal. Black rubber. For brown see our #70-0208-89. Made to slip over old metal core after removing old rubber.Length: 8.25 inches.

$57.90/ea.
In Stock
Body Anti-Squeak Rubber

p/n: 60-0054-73

Bulb type seal, gravel shield-to-rear bumper, anti-squeak. Also used as a door weatherstrip for some makes and models. Twelve (12) foot strip.

$55.20/ea.
In Stock
Window pinchweld seal

p/n: 70-0096-52

Pinchweld seal, windshield, to seal and retain outer reveal molding. Used with our #70-1192-52. Twelve (12) foot strip.

$54.40/ea.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Channel, rigid run, window division bar. Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar.

$52.10/pr.
In Stock
Gravel shield anti-squeak

p/n: 70-0461-45

Gasket strip, rear valance on gravel shield to body. One thirty seconds (1/32) inch by one and three fourths (1-3/4) inch by six (6) foot. Customer to cut bolt clearance as needed.

$51.80/ea.
Made to Order Takes 2-3 Days
Fresh air intake plug

p/n: 70-0187-31

Gasket, firewall opening for fresh air intake.

$50.90/ea.
In Stock
Taillight lens gasket

p/n: 70-1213-15

Gasket, taillight lens. For the main pad order our #70-1212-15.Length: 6.875 inches.

$50.00/pr.
In Stock
Hood bumper

p/n: 70-0409-42

Bumpers, hood top panel at cowl. One half (1/2) inch by one half (1/2) inch by three and one fourth (3-1/4) inch. Held in place by screws. Two (2) to four (4) per car as required.

$48.30/pr.
In Stock
Flexible Run Channel 6 Foot

p/n: 70-1239-58

Window run channel with stainless beaded edge. Six (6) foot length. Cloth covered, mohair lined, flexible channel for sides and top of door windows. Exact replacement for listed vehicles but can be used in many applications.

$48.20/ea.
In Stock
Beltline weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Seven sixteenths (7/16) inch wide, with chrome bead, mohair faced, flexible. Two (2) three (3) foot strips. Bend to fit.

$47.70/pr.
In Stock
Brake and clutch pedal pad

p/n: 70-0176-22

Pads, brake and clutch pedals. Black rubber. For brown see our #70-0176-89.

$47.60/ea.
In Stock
Headlight Door To Lens Seal

p/n: 70-0389-14

Headlight door to lens seal. Molded without wire. Single lip type for sealed beams.

$46.40/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-0694-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$46.10/pr.
In Stock
Windshield Division Bar Gasket

p/n: 70-0372-51

Gasket, windshield center post, "H" section, properly sized, requires fitting to top and bottom, not drilled.

$45.30/ea.
In Stock
Flexible Run Channel 5 Foot

p/n: 70-1238-58

Window run channel, stainless beaded edge. Cloth covered, mohair lined flexible metal channel for sides and top of door windows. Perfect dimensions, Five eighths (5/8) inch wide by nine sixteenths (9/16) inch overall height, exact replacement. Five (5) fo

$44.30/ea.
In Stock
Sliding Quarter Window Weatherstrip

p/n: 70-0353-78

Weatherstrip, inner and outer for sliding quarter window, chrome beaded, mohair faced, flexible stock. May be formed to required outline. Six (6) foot strip.

$43.50/ea.
In Stock
Trunk hinge mounting pad

p/n: 70-1229-87

Mounting pad, trunk hinge. Four (4) piece set.Length: 7.625 inches.

$43.50/set
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
Door weatherstrip

p/n: 60-0114-73

Weatherstrip, door bottom, sponge constant section, solid skin surface, superior quality. Sold in six (6) foot strips only.Length: 72.0 inches.

$41.60/ea.
In Stock
Headlight Mounting Pad

p/n: 70-0201-14

Headlight body mounting gasket. Rubber.

$41.10/pr.
In Stock
Brake and clutch shank seal

p/n: 70-0465-23

Grommets, brake and clutch pedal shank below floorboard.

$39.30/pr.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$39.10/ea.
In Stock
Horn button contact ring

p/n: 70-0468-21

Cushion ring, horn button contact, upper.

$37.40/ea.
In Stock
Coil wire sleeve

p/n: 70-0546-21

Nipple, coil wire to distributor at coil end.

$37.00/ea.
In Stock
Rigid run channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining, one half (1/2) inch deep by one half (1/2) inch wide, fifteen (15) inches long.

$36.10/pr.
In Stock
Door lock weatherstrip

p/n: 50-0172-70

Weatherstrip, door lock, front and rear. Protects door lock mechanism from dust and weather.Length: 3.625 inches.

$34.90/pr.
In Stock
Firewall grommet

p/n: 70-0185-20

Grommet, firewall, main wiring harness plus up to five (5) accessory wires.

$34.80/ea.
In Stock
Division bar chrome retainer

p/n: 70-0373-51

Retainer, for outside windshield center post stainless molding. Use with original stainless molding and clips.Length: 15.5 inches. Width: 1.25 inches.

$33.60/ea.
In Stock
Exhaust system hanger

p/n: 70-0626-13

Insulator (hanger) tailpipe to frame. See also our #70-0600-13.Length: 3.9375 inches. Width: 1.9375 inches.

$32.80/ea.
Made to Order Takes 1-2 Days
Bumper seal

p/n: 70-0563-45

Filler valance or deflector, rear. Eight (8) inches long (cut shorter where required), three (3) to four (4) required per car.

$31.20/ea.
In Stock
Starter solenoid boot

p/n: 70-0371-21

Boot, starter solenoid.

$26.60/ea.
In Stock
Firewall grommet

p/n: 70-0186-20

Grommet, firewall, vacuum operated radio antenna lines.

$26.10/ea.
In Stock
Exhaust system hanger

p/n: 70-0631-27

Insulator, exhaust system, muffler pipe bracket. Also intermediate pipe bracket on extra-long body styles. Two (2) required per car, most models.

$24.80/ea.
In Stock
Door check link rod end stop

p/n: 70-0479-70

End nut, check link (rubber bar with steel bar insert). Three fourths (3/4) inch by three fourths (3/4) inch by two (2) inch threaded five sixteenths (5/16) inch. (For round stop nut, see our #70-0326-70).

$24.50/ea.
In Stock
Rear Spring Pad

p/n: 70-0191-32

Pad, rear spring insulator for two (2) inch wide springs. (see our number 70-0245-32 for two and one fourth (2-1/4) inch springs). Cloth reinforced. Four (4) per vehicle.

$23.90/ea.
In Stock
Battery cable boot

p/n: 70-0704-21

Boot, battery cable at starter solenoid.Width: 2.75 inches.

$23.50/ea.
In Stock
Metal sleeved grommet

p/n: 70-0203-41

Flanged rubber grommet with metal sleeve bushing. Used as part of the accelerator relay lever. Also used from 1959-61 on all Cadillac models as a bushing for the windshield wiper relay lever adaptor.

$22.40/ea.
In Stock
Antenna mount pad

p/n: 70-0392-19

Mounting pad, vacuum operated fender mounted antenna with one and one half (1-1/2) inch base.

$21.30/ea.
In Stock
Hood rest roller

p/n: 70-0196-42

Roller, hood rear center rest.

$21.30/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Ferrule and grommet kit

p/n: 70-0597-69

Ferrule and grommet set, outside door handle. Cadmium plated ferrule with rubber sleeve. Two (2) piece set for one (1) door.

$18.60/set
In Stock
Door Handle Ferrule

p/n: 60-0389-69

Ferrule, outside door handle. Chrome with rubber sleeve. Two (2) piece set includes one (1) chrome piece and one (1) rubber piece. Enough for one door.

$17.80/set
In Stock
Lower suspension arm dust seal

p/n: 70-0625-32

Dust seal, lower suspension arm bushing. Four (4) required per car.

$17.50/ea.
In Stock
Firewall grommet

p/n: 70-0198-20

Grommet, firewall, parking brake cable, has three eighths (3/8) inch angular hole through one and one fourth (1-1/4) inch diameter grommet.

$16.70/ea.
In Stock
Firewall grommet

p/n: 70-0158-21

Grommet for ignition switch conduit through firewall.

$15.70/ea.
In Stock
Gravel shield bumper

p/n: 70-0569-30

Bumper, gravel deflector, anti-rattle for front or rear bumper mounting bar. Metal with rubber covered end. Three and one half inches (3-1/2") long by two and one fourths inch (2-1/4") wide. Front Bumper Bar Usage 1942: All Cadillac mo

$15.50/ea.
In Stock
Stabilizer grommet

p/n: 70-0221-33

Grommet, rear stabilizer bar (angular sway bar). Four (4) required per car. Fully molded rubber. One and three fourths inch (1 3/4") outside diameter by five eighths inch (5/8") inside hole diameter by three fourths inch (3/4") circular base height by one

$15.40/ea.
In Stock
Wiper transmission gasket

p/n: 70-0252-53

Gasket, windshield wiper transmission mounting.

$14.40/pr.
In Stock
Hood rest pad

p/n: 70-0139-42

Pad, hood rest (hood bumper). In years 1941-47 purchase six (6) per car. In year 1948-1949 purchase two (2) per car.

$14.20/ea.
In Stock
Body mounting pad

p/n: 70-0235-48

Pad, body mounting. Fully molded rubber with locating collar. Rectangular shaped. Three inches (3") length by two inches (2") width by fifteen sixteenths inch (15/16") locating collar outside diameter by one half inch (1/2") inside hole diameter. Three ei

$14.00/ea.
In Stock
Lower suspension arm dust seal

p/n: 70-0624-32

Dust seal, "O" ring. Lower suspension arm pin bushing. Four (4) required per car.Height: .25 inches.

$13.20/ea.
In Stock
Shock absorber bushing

p/n: 70-0545-33

Bushing, rear shock absorber link, upper and lower end. Seven eighths (7/8) inch outside diameter, nine sixteenths (9/16) inch inside diameter, thirteen sixteenths (13/16) inch long. Four (4) per car.

$12.10/ea.
In Stock
Floor Pan Plug

p/n: 35-0576-45

Plug, floor pan, oval, self-retaining, fits one fourth (1/4) inch by nine sixteenths (9/16) inch hole. Width: .75 inches.

$11.80/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Wiring grommet

p/n: 70-0355-14

Grommet, electric wire into light body under fenders, for headlights, taillights, some parking lights and auxiliary (fog) lights. Fits seven eighths (7/8) inch hole in light body. Two (2) to eight (8) per car as required.

$10.60/ea.
In Stock
Hood lock pad

p/n: 70-0188-42

Grommet pad, hood lock pilot.

$10.50/ea.
In Stock
Body mounting pad

p/n: 50-0131-48

Pad, body mounting. Fully molded rubber with locating collar. Two inch (2") square by thirteen sixteenths inch (13/16") locating collar outside diameter by one half inch (1/2") locating collar inside diameter. Three eights inch (3/8") square base height b

$9.90/ea.
In Stock
Rear spring bushing

p/n: 70-0182-32

Bushing, rear spring and shackle, lower. Requires 8 per car.

$9.40/ea.
In Stock
Door lock mounting pad

p/n: 27-0020-69

Mounting pad, door lock cylinder, right and left.Length: 1.6875 inches.

$9.10/pr.
In Stock
Door Handle Grommet

p/n: 70-0177-69

Grommet for outside door handle bezel.

$7.90/ea.
In Stock
Shift lever bushing

p/n: 70-2026-26

Bushing, lower shift levers and adjustable eye. Includes metal tube bearing. Used on transmission shifter rods.

$7.90/ea.
In Stock
Window stop stem bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$7.90/ea.
In Stock
Firewall plug

p/n: 32-1215-20

Plug, firewall access hole, for wire, cable, tubes, etc. in firewall. Sheet Metal Hole: 1" Large Hole: 1/4" Small Hole: 1/8" Outside Diameter: 1-5/16" Slot Width: 1/16"

$7.80/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$7.80/ea.
In Stock
Body mounting pad

p/n: 70-0264-48

Cushion, body bolts under washer below bracket. Fully molded rubber. One and one half inch (1 1/2") inch outside diameter by seventeen thirty seconds inch (17/32") inside hole diameter by one fourth inch (1/4") height.

$7.40/ea.
In Stock