Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

149 items found matching 1942 Chevrolet Special DeLuxe 4 door Sport Sedan
Door opening step pad

p/n: 70-1118-45

Mats, front door opening, with metal backing, proper body contour and attaching holes. Two (2) piece set for both front doors.Length: 30.375 inches.

$356.69/pr.
In Stock
Door opening step pad

p/n: 70-1119-45

Mats, rear door opening, with metal backing, proper body contour and attaching holes. Two (2) piece set for both rear doors.Length: 21.875 inches.

$334.99/pr.
Made to Order Takes 2-3 Days
Front Door Weatherstrip Kit

p/n: 90-0108-72

Front door weatherstrip kit. This four (4) piece kit is the primary seal for the door to the body. Set includes the door edge weatherstrip with molded corners and hinge post weatherstrip.

$308.69/set
In Stock
Hinge post weatherstrip

p/n: 60-0594-73

Hinge post weatherstrip, front doors

$275.19/pr.
In Stock
Side Window Run Channel Kit

p/n: 90-0141-58

This ten (10) piece kit includes the inner and outer windowfelts, upper and lower rigid run channels, and flexible run channels needed to complete two (2) doors.

$262.69/set
Kit
Front Door Vent Window Kit

p/n: 90-0380-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$200.69/set
Kit
Side Window Run Channel Kit

p/n: 90-0142-58

This six (6) piece kit includes the inner and outer windowfelts and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models without vent windows in the door.

$186.59/set
Kit
Rear Door weatherstrip

p/n: 90-0132-72

Rear door edge weatherstrip. This part is the primary door to body weatherstrip. Includes the perimeter seal for both rear doors and the molded corners. Set consists of four (4) pieces. Kit does not include adhesive. Includes the following components

$178.69/set
In Stock
Motor mount service

p/n: 60-0224-11

Engine mount, side (support cushions), right and left. Side frame bracket to clutch housing bracket. Two (2) per car.Width: 2.5 inches. Height: 1.5 inches.

$172.89/pr.
Call or Email
Front Door Vent Window Weatherstrips

p/n: 38-0037-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$161.49/pr.
In Stock
Motor mount service

p/n: 60-0296-11

Cushion, engine mount, front. Revulcanization service only.Length: 3.0 inches. Width: 2.125 inches.

$161.39/pr.
Call or Email
Gravel shield

p/n: 60-0575-45

Gravel shield, rear fender. Right and left hand carefully tooled stone shields crafted to factory design.

$160.79/pr.
In Stock
Rear Window Gasket

p/n: 60-0278-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$143.49/ea.
In Stock
Spring seat service

p/n: 60-0619-35

Seat, rear spring. Revulcanization service only. Send in complete casting with metal sleeve bushing.

$123.19/ea.
Call or Email
Rear spring bumper service

p/n: 60-0425-32

Bumpers, rear springs to frame. Revulcanization service only.Length: 3.0 inches. Width: 2.5 inches.

$120.99/pr.
Call or Email
Windshield Gasket

p/n: 70-1534-50

A vulcanized windshield weatherstrip for windows without chrome reveal molding or divider bar. This windshield weatherstrip mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$113.99/ea.
Made to Order Takes 2-3 Days
Windshield Gasket

p/n: 60-0186-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$107.79/ea.
Made to Order Takes 2-3 Days
Transmission mount service

p/n: 60-0530-25

Insulator, plate assembly, guide, transmission support bracket. Revulcanization service only.Used with our #60-0315-25 from 1940 to 1946..Length: 5.

$104.69/ea.
Call or Email
Trunk Weatherstrip

p/n: 70-0988-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$95.59/ea.
In Stock
Transmission mount service

p/n: 60-0407-25

Insulator (support), transmission mounting. Revulcanization service only.Length: 7.0625 inches.

$86.39/ea.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Front Stabilizer Kit

p/n: 60-0221-33

Link kit, full replacement, front stabilizer bar link. Twenty two (22) piece set. Hex head bolt 5/16"-24NF x 6-3/8" long. Comes with metal sleeve, metal cup washers and rubber grommets.

$72.49/set
In Stock
Fenderskirt Edge Seal

p/n: 70-0154-45

Seal, fenderskirt edge, exact copy, trim notch for skirt lock at installation. Compare sketch with your original to be sure. Two (2), five (5) foot strips.

$70.69/pr.
In Stock
Fenderskirt edge seal

p/n: 70-0289-45

Seal, fenderskirt edge. Good quality and workmanship, see sketch for comparison. Ten (10) foot strip.Length: 120.0 inches. Width: .1875 inches.

$69.99/ea.
In Stock
Sliding quarter window seal

p/n: 60-0398-78

Weatherstrip, sliding quarter window. Mounted vertically in body where leading edge of sliding window fits when closed. Right & left rubber only.

$67.99/pr.
In Stock
Hood to cowl weatherstrip

p/n: 60-0091-42

Seal, side of hood ledge (cowl). Molded with all original details. One (1) pair required per car.Length: 11.0 inches.

$64.99/pr.
In Stock
Fenderskirt edge seal

p/n: 20-0111-44

Pad, fenderskirt edge, similar to our #70-0055-45, but thinner. Approximately five (5) foot strip per skirt.Length: 60.0 inches. Width: .15625 inches.

$64.89/pr.
In Stock
Front Suspension Rubber Bumper

p/n: 60-0103-32

Front Suspension Rubber Bumper for the front suspension lower control arm (attaches to lower arm spring mount). Steel core, with original size bolt. Width: 1.625 inches.

$62.99/pr.
In Stock
Taillight mounting pad

p/n: 60-0008-15

Mounting pads, taillight.Length: 6.50 inches. Width: 2.6875 inches.

$61.39/pr.
In Stock
Brake and Clutch Pedal Pads

p/n: 60-0068-22

Brake and Clutch Pedal Pads - The proper design and fully detailed with ribs extending down over sides of the pad. Length: 3.50 inches. Width: 2.0 inches.

$60.59/pr.
In Stock
Front Spring Rubber Bumper

p/n: 70-0329-32

Front Spring Rubber Bumper - for upper control arm on frame.

$60.59/pr.
In Stock
Front fender seal

p/n: 60-0522-45

Seal, front fender baffle, right and left. One (1) pair per car. Length: 5.25 inches.

$57.49/pr.
In Stock
Gravel shield anti-squeak

p/n: 60-0020-30

Anti-squeak, rear gravel deflector-to-bumper. Excellent copy of original extrusion. Six (6) foot strip.Width: 1.0 inches.

$56.69/ea.
In Stock
Window pinchweld seal

p/n: 70-0096-52

Pinchweld seal, windshield, to seal and retain outer reveal molding. Used with our #70-1192-52. Twelve (12) foot strip.

$56.69/ea.
In Stock
Accelerator pedal service

p/n: 60-0701-40

Pedal, accelerator. Revulcanization service only. Excellent cover detailing with molded in rod ball socket as original.

$54.89/ea.
Call or Email
Brown steering column grommet

p/n: 60-0621-89

Grommet, steering column to toe board. Brown rubber. For black see our #60-0621-36.Color:brown Length: 4.25 inches.

$54.39/ea.
In Stock
Headlight Door To Lens Seal

p/n: 70-0493-14

Headlight Door To Lens Seal - Molded without wire. Double lip type for sealed beam headlights. Note: Compare with our single lip type #70-0389-14 sold separately.

$54.29/pr.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$54.29/pr.
In Stock
Steering column grommet

p/n: 60-0621-36

Grommet, steering column to toe board. Black rubber. For brown see our #60-0621-89.

$53.29/ea.
In Stock
Flexible Run Channel

p/n: 70-1239-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$52.19/ea.
In Stock
Beltline Weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 3ft pair.

$51.59/pr.
In Stock
Inner Fender Seal

p/n: 60-0288-45

Inner Fender Seal for anti-rattle, runningboard apron to body, or fender splash panels. Nine sixteenths (9/16) inch by seven eighths (7/8) inch slotted sponge rubber to accept rivets. Sold in eight (8) foot strips.

$50.79/ea.
In Stock
Headlight Door To Lens Seal

p/n: 70-0389-14

Headlight door to lens seal. Molded without wire. Single lip type for sealed beams.

$50.19/pr.
In Stock
Vent division bar weatherstrip

p/n: 60-0569-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$49.89/pr.
In Stock
Windshield Division Bar Gasket

p/n: 70-0372-51

Gasket, windshield center post, "H" section, properly sized, requires fitting to top and bottom, not drilled.

$48.99/ea.
In Stock
Rear spring bushing

p/n: 60-0311-35

Bushing, rear spring front eye, inlox cartridge type as original.

$48.29/ea.
In Stock
Flexible Run Channel

p/n: 70-1238-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

$47.89/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock