Search Results

914 items found matching 1948
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Windshield Gasket

p/n: 60-0186-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

$104.60/ea.
In Stock
Motor mount service

p/n: 27-0039-11

Insulator, engine support front. One (1) per car. Revulcanization service only.Length: 5.625 inches.

$104.10/ea.
Call or Email
Convertible top arm cover

p/n: 70-0736-67

Cap, folding pillar to side roof rail link. Perfect copy in original grey rubber. Four (4) piece set.Length: 1.75 inches.

$103.40/set
In Stock
Brown carpet heel plate

p/n: 40-0190-89

Heel pad. Brown rubber. For black see our #40-0190-88. To protect driver's side floor carpet.

$102.60/ea.
In Stock
Transmission mount service

p/n: 50-0263-25

Support, transmission (insulator). Revulcanization service only. See also our #50-0262-25, many models use both.Length: 5.0 inches. Width: 1.875 inches.

$102.30/ea.
Call or Email
Runningboard edge seal

p/n: 20-0482-45

Seal, runningboard to rear quarter panel special.

$101.30/pr.
Ships in 3-4 Days
License light mounting pad

p/n: 70-1221-17

Pad set, license light mount and lens gasket.Length: 12.625 inches.

$101.00/set
In Stock
Coil spring insulator pad

p/n: 70-0801-32

Pad, coil spring insulator. Molded four (4) piece set for one (1) car.

$100.60/set
In Stock
Front spring bumper

p/n: 30-0517-32

Bumper, front spring rebound, lower.Width: 2.125 inches. Height: 2.25 inches.

$100.60/pr.
Made to Order Takes 2-3 Days
Transmission mount service

p/n: 50-0262-25

Pad, transmission mounting, thrust. Revulcanization service only. One (1) per car required. See also our #50-0263-25. Many models use both.Length: 7.

$100.50/ea.
Call or Email
Rear window division bar seal

p/n: 70-0414-82

Pad set, back window division bar. Molded with screw clearances. Four (4) piece set.

$100.10/set
Made to Order Takes 1-2 Days
Front spring bumper

p/n: 70-0172-32

Bumpers, front spring. Lower arm, original copy, integral molded plate and stud, three eighths (3/8) inch standard thread, for installing.

$100.00/pr.
In Stock
Rear Window Gasket

p/n: 60-0609-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$99.90/ea.
In Stock
Accelerator pedal service

p/n: 70-1806-40

Accelerator pedal. Black rubber. For brown see our #70-1806-89. Revulcanization service only.

$98.70/ea.
Call or Email
Front Door weatherstrip

p/n: 12-0015-73

Weatherstrip, door edge, perfect reproduction of fine grade sponge. With solid heavy skin for beautiful job. Two (2) piece set for both doors.

$98.20/set
Made to Order Takes 3 Days
Torque ball service

p/n: 50-0190-27

Retainer, torque ball, heavy steel jacket with molded rubber inner collar. Revulcanization service only.

$97.40/ea.
Call or Email
Front Door weatherstrip

p/n: 40-0495-73

Kit, door weatherstrip. Set includes lock and hinge pillar strips (nine (9) foot of our #70-0777-99 and eleven (11) foot of #40-0480-73).

$96.60/set
In Stock
Trunk Weatherstrip

p/n: 70-0873-84

This trunk weatherstrip set is designed from original parts for superior fitment and seal. The seals mount directly to the body and cover the full perimeter of the trunk.

$96.50/set
In Stock
Accelerator pedal service

p/n: 27-0082-40

Accelerator pedal. Black rubber. For brown see our #27-0082-89. Revulcanization service only.Length: 11.0 inches.

$96.40/ea.
Call or Email
Door weatherstrip Kit

p/n: 20-1655-72

Door edge weatherstrip. This set is the primary door to body perimeter weatherstrip.

$96.40/set
Ships in 3-4 Days
Motor mount service

p/n: 25-0062-11

Motor mount, upper front at cross member. One (1) per car. Revulcanization service only.Length: 4.75 inches. Width: 2.25 inches.

$95.90/ea.
Call or Email
Taillight mounting pad

p/n: 50-0173-15

Pad, taillight mounting, right and left.Width: 10.5625 inches.

$95.80/pr.
Made to Order Takes 1-2 Days
Taillight mounting pad

p/n: 50-0121-15

Mounting pads, taillights, right and left.Width: 10.5625 inches.

$95.80/pr.
In Stock
Side window leading edge

p/n: 40-0396-80

Side window vertical leading edge weatherstrip.

$94.70/pr.
In Stock
Trunk Weatherstrip

p/n: 20-1687-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$94.70/ea.
In Stock
Trunk Weatherstrip

p/n: 70-1691-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$94.10/ea.
In Stock
Roof rail filler

p/n: 70-0396-67

Fillers, side roof rail to front roof rail at front corner, right and left. Metal core, threaded for original screws.

$93.30/pr.
In Stock
Trunk Weatherstrip

p/n: 70-0874-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$93.30/ea.
In Stock
Trunk Weatherstrip

p/n: 20-1686-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$93.20/ea.
In Stock
Rear axle bushing

p/n: 25-0082-32

Bushing, rear axle support arm. Four (4) piece set.

$92.90/set
Made to Order Takes 1-2 Days
Windshield Gasket

p/n: 70-1945-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$92.80/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0988-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$91.80/ea.
In Stock
Side window leading edge

p/n: 30-0475-57

Weatherstrip, quarter window leading edge.Length: 12.125 inches. Width: .8125 inches.

$91.60/pr.
In Stock
Accelerator pedal service

p/n: 30-0401-41

Pedal, accelerator. Revulcanization service only. Includes new rod ball socket and pivot. Original pattern tread.Length: 9.625 inches. Width: 1.9375 inches.

$90.30/ea.
Call or Email
Coil wire sleeve

p/n: 14-0022-21

Sleeve, spark plug wires from distributor to wiring tube, rubber only.

$90.30/pr.
Made to Order Takes 1-2 Days
Convertible roof rail kit

p/n: 12-0017-73

Weatherstrip set, windshield corner post and roof rail to window, fits metal retainer. Four (4) piece set for both doors.

$90.30/set
Made to Order Takes 3 Days
Carpet heel plate

p/n: 40-0190-88

Heel pad. Black rubber. For brown see our #40-0190-89. To protect driver's side floor carpet.

$89.70/ea.
In Stock
Gravel pan welt

p/n: 10-0121-45

Welt, gravel pan. Ten (10) foot strip. Height: .375 inches.

$88.90/ea.
Made to Order Takes 3 Days
Front Door Vent Window Kit

p/n: 90-0438-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. The main seals are molded as a straight piece and designed from original parts for superior fitment and seal.

$92.80/set
$88.20/set
5% discount
Kit
Rear bumper grommet

p/n: 30-0127-29

Grommets, rear bumper extension bar through rear fender for wrap around bumpers. Fully molded rubber w/ full detail as in original. Four and one half inch (4-1/4") outside diameter by one and five eighths inch (1-5/8") inside hole length by one fourth inc

$86.30/pr.
Made to Order Takes 1-2 Days
Rigid run channel

p/n: 70-0536-58

Run channel, front door window, for full length of division bar (approximately twenty nine (29) inches). Rigid, bright beaded edge, mohair lined channel, die trimmed and formed at top.

$85.50/pr.
In Stock
Trunk Weatherstrip

p/n: 20-1685-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$84.90/ea.
Made to Order Takes 3-4 Days
Rear Window Gasket

p/n: 60-0469-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$84.60/ea.
In Stock
Flexible Run Channel

p/n: 60-0129-58

Channel, flexible side window run, for window with metal glass frames. Flexible corrugated steel, cloth covered and mohair lined. Ninety (90) inch long strip.

$83.80/ea.
In Stock
Front Door Vent Window Weatherstrips

p/n: 20-1614-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are molded as a straight piece and designed from original parts for superior fitment and seal.

$83.80/pr.
Temporarily Unavailable
Trunk Weatherstrip

p/n: 70-1129-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$82.70/ea.
In Stock
Hydraulic window lift hose

p/n: 30-0247-21

Hose, hydraulic window lift. Eighteen (18) inches long.

$82.40/pr.
In Stock
Taillight mounting pad

p/n: 60-0144-15

Pads, taillight body mounting, right and left.Length: 6.0 inches.

$82.20/pr.
In Stock
Trunk Weatherstrip

p/n: 70-1690-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$82.00/ea.
In Stock
Windshield Gasket

p/n: 20-0463-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

$81.70/ea.
In Stock
Body anti-squeak 64 inch strip

p/n: 70-1117-45

Filler, runningboard-to-body, sixty four (64) inch long strip. For forty (40) inch strips see our #70-1116-45.

$80.20/pr.
In Stock
Division bar grommet

p/n: 70-3135-62

Grommet, rear door vent divider post. Upper and lower, right and left. 4 piece set.

$80.20/set
In Stock
Taillight gasket

p/n: 70-0927-15

Gasket set, taillight assembly. Four (4) piece set for lens and housing, right and left.

$79.40/ea.
In Stock
Radiator mounting pad

p/n: 30-0121-31

Grommet, radiator cradle to frame tie rod. 1st type, with locating boss. One four (4) piece set required per car. See also our #30-0309-31.

$79.00/set
In Stock
Motor mount pad

p/n: 30-0238-11

Cushions, motor support, at timing gear cover. One (1) pair required per car. Sold only in pairs.

$78.30/pr.
In Stock
Fog light gasket

p/n: 70-1242-17

Seal, fog light body. With notches. For seal without notches see our #70-1243-17.Length: 6.5 inches. Width: 7.75 inches.

$78.10/pr.
In Stock
Brown brake and clutch pad

p/n: 40-0121-89

Pads, brake and clutch pedal. Brown rubber. For black see our #40-0121-22. Oval style, perfect copy.

$77.80/pr.
In Stock
Convertible top arm pad

p/n: 60-0455-67

Pad, convertible top folding post, fastens on lower end with two (2) screws. Metal core.Length: 1.3125 inches. Width: 1.25 inches.

$77.80/pr.
In Stock
Steering column grommet

p/n: 60-0436-32

Grommet, steering gear. Molded with metal core as original with all original features.Length: 4.375 inches.

$77.30/ea.
In Stock
Brown accelerator service

p/n: 70-1806-89

Accelerator pedal. Brown rubber. For black see our #70-1806-40. Revulcanization service only.

$76.80/ea.
Call or Email
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$76.30/ea.
In Stock
Gravel shield bumper

p/n: 30-0384-44

Cushion, rear gravel to bumper. Six (6) feet long. One (1) strip required per car.Length: 72.00 inches. Width: .25 inches. Height: .6875 inches.

$75.90/ea.
In Stock
Brown accelerator service

p/n: 27-0082-89

Accelerator pedal. Brown rubber. For black see our #27-0082-40. Revulcanization service only.

$75.70/ea.
Call or Email
Front spring bumper

p/n: 70-0171-32

Bumper, front spring, upper arm (on frame).

$75.60/pr.
In Stock
Motor mount pad

p/n: 30-0267-11

Insulators, front engine support at timing gear cover.

$75.00/pr.
In Stock
Front spring bumper

p/n: 30-0516-32

Bumper, front spring rebound, upper.Height: 2.25 inches.

$74.00/pr.
In Stock
Vent division bar assembly

p/n: 20-0476-62

Assembly, complete division bar. Left-side ONLY. Ready to install. Comes complete with brackets and back of vent window seal.

$73.20/ea.
In Stock
Vent division bar assembly

p/n: 20-0475-62

Assembly, complete division bar. Right-side ONLY. Ready to install. Comes complete with brackets and back of vent window seal.

$73.20/ea.
In Stock
Motor mount service

p/n: 10-0135-11

Motor mount, revulcanization service.Height: 2.0 inches.

$73.00/ea.
Call or Email
Taillight mounting pad

p/n: 40-0392-15

Pad, brake light. Mounts on center of trunk lid.Length: 13.125 inches.

$73.00/ea.
In Stock
Brown accelerator pedal pad

p/n: 70-0208-89

Pad, accelerator pedal. Brown rubber. For black see our #70-0208-40. Made to slip over old metal core after removing old rubber.

$71.90/ea.
Made to Order Takes 1-2 Days
Red brake and clutch pedal pad

p/n: 30-0188-89

Pads, brake and clutch pedal, slip over type. Black and red rubber. For black only see our #30-0188-22.Length: 3.875 inches. Width: 2.875 inches.

$71.70/pr.
In Stock
Convertible top arm pad

p/n: 50-0310-67

Pad, folding post, lower, on bottom of post, held by two (2) screws. Brass core, right and left hand.Length: 1.4375 inches. Width: 1.5 inches.

$70.50/pr.
Made to Order Takes 2-3 Days
Rear bumper grommet

p/n: 40-0468-30

Grommets, rear bumper. Fully molded rubber, used on rear side brackets only. Four and seven eighths inch (4-7/8") outside length by three and three sixteenths inch (3-3/16') outside width by one and fifteen sixteenths inch (1-15/16") inside hole length by

$70.50/pr.
In Stock
Axle rebound pad

p/n: 70-0210-32

Bottoming pads, rear axle. Rubber block mounts by bracket to rear axle tube.

$70.40/pr.
In Stock
Stabilizer bushing

p/n: 70-0627-33

Bushings, stabilizer bar, front. Fully molded rubber. One and three fourths inch (1 3/4") length by one and one half inch (1 1/2") width by three fourths inch (3/4") inside hole diameter by one and five eighths inch (1 5/8") height.

$70.10/pr.
In Stock
Rigid run channel

p/n: 30-0302-57

Run channel, front door window, lock side below beltline.

$69.80/pr.
Made to Order Takes 2-3 Days
Convertible top arm pad

p/n: 70-1217-67

Pad, top folding post. Fastens on lower end of post with two (2) screws. Metal core, close copy.

$69.70/pr.
Made to Order Takes 2-3 Days
Roof rail filler

p/n: 50-0255-67

Filler, folding top side roof rail to front roof rail. Right and left with metal core as original.Length: 2.0 inches. Width: 1.75 inches.

$69.70/pr.
Made to Order Takes 2-3 Days
Front Stabilizer Kit

p/n: 60-0221-33

Link kit, full replacement, front stabilizer bar link. Twenty two (22) piece set. Hex head bolt 5/16"-24NF x 6-3/8" long. Comes with metal sleeve, metal cup washers and rubber grommets.

$69.60/set
In Stock
Rigid run channel

p/n: 30-0023-57

Channel, rigid run, for division bar, un-beaded, plush lined, cloth covered, twenty four (24) inches long, channel size one half (1/2) inch outside width

$69.50/pr.
In Stock
Parking light gasket

p/n: 70-0441-16

Gaskets, parking and turn signal light lens.

$69.10/pr.
In Stock
Transmission mount service

p/n: 10-0157-25

Transmission mount, revulcanization service. Believe one type or other used on All 4 cylinder.

$69.00/ea.
Call or Email
Front spring bumper

p/n: 60-0393-32

Bumper, front spring axle-to-frame.

$68.30/pr.
Made to Order Takes 1-2 Days
Body bumper kit

p/n: 90-0213-90

Sixteen (16) piece body bumper kit.

$75.40/set
$67.90/set
10% discount
Kit
Fenderskirt Edge Seal

p/n: 70-0154-45

Seal, fenderskirt edge, exact copy, trim notch for skirt lock at installation. Compare sketch with your original to be sure. Two (2), five (5) foot strips.

$67.90/pr.
In Stock
Side Window scraper seal

p/n: 60-0566-58

Weatherstrip, door window scraper seal, inner and outer. Slides into grove on top of the door's window opening and wipes the glass when window is raised and lowered. Customer will have to trim to length for proper fit. Four (4) piece set.

$67.90/set
In Stock
Fog light gasket

p/n: 70-1243-17

Seal, fog light body. Without notches. For seal with notches see our #70-1242-17.Length: 6.5 inches. Width: 7.75 inches.

$67.40/pr.
In Stock
Fenderskirt edge seal

p/n: 70-0289-45

Seal, fenderskirt edge. Good quality and workmanship, see sketch for comparison. Ten (10) foot strip.Length: 120.0 inches. Width: .1875 inches.

$67.20/ea.
In Stock
Backup light mounting pad

p/n: 70-0582-17

Pad, backup light mounting. Made with angled surface to align light with body.

$66.40/pr.
In Stock
Prop shaft retainer bushing

p/n: 70-2268-27

Retainer, intermediate bearing. All models with two piece driveshafts.

$66.40/ea.
Made to Order Takes 1-2 Days
Fog light gasket

p/n: 70-0609-17

Gasket, fog light opening.Length: 12.25 inches. Width: 5.5 inches. Height: .50 inches.

$66.00/pr.
In Stock
Front bow weatherstrip

p/n: 40-0418-65

Weatherstrip, windshield to front bow. Top quality extrusion cut five (5) feet long.Length: 60.0 inches. Width: .6875 inches.

$65.30/ea.
In Stock
Sliding quarter window seal

p/n: 60-0398-78

Weatherstrip, sliding quarter window. Mounted vertically in body where leading edge of sliding window fits when closed. Right & left rubber only.

$65.30/pr.
In Stock
Brake and clutch pedal pad

p/n: 30-0188-22

Pads, brake and clutch pedal, slip over type. Black rubber only. For black and red (semi-automatic clutch models) see our #30-0188-89.Length: 3.875 inches.

$65.20/pr.
In Stock
Convertible roof rail bumper

p/n: 70-1023-67

Bumper, convertible top. Fully molded with threaded metal core. Excellent quality.Length: 1.0625 inches. Width: 1.0 inches. Height: 1.0 inches.

$64.10/pr.
In Stock
Firewall grommet

p/n: 30-0110-42

Grommets, hood lock link through firewall.

$63.60/pr.
In Stock
Taillight lens gasket

p/n: 40-0348-15

Gasket taillight lens. Relieved top and bottom as original, for better sealing.Length: 4.3125 inches. Width: 2.5 inches.

$63.20/pr.
Made to Order Takes 1-2 Days