Please click on the part name in red in order to get a complete description.
Bushing, rear axle track bar. Made in halves for easier replacement. Sold in pairs, two (2) pair needed per bar.Height: .75 inches.
Mounting pad, trunk handle and lock escutcheon plate.Length: 2.875 inches. Width: 1.625 inches.
Retainer, for outside windshield center post stainless molding. Use with original stainless molding and clips.Length: 15.5 inches. Width: 1.25 inches.
Kit, drag link end repair. Kit includes: 1-3336, 1-3326, 1-3327, 2-3320, 1-3328. Two (2) kits required per drag link.
Grommets, top motor to firewall bracket. Three (3) piece set.
Grommets, front bumper arms to splash pan rubber. Four (4) piece set.
Seal, rear bumper to stone deflector rubber.
Kit, motor mount. Enough for one motor mount. Kit includes one (1) each of 78-6029-A, B-6038-C, 78-6048-A, B-6039-A, and B-6047.
Grommets, runningboard to frame and front fender to cowl. Rubber grommets and metal washers. Twenty four (24) piece set.
Shackle set, spring. Front. Original steel stud type.
Seal, brake and clutch pedal shank to floorboard. Three eighths (3/8) inch thick, two and one half (2-1/2) inch diameter.
Bumper, rear bumper deflector. Two (2) per car.Chevrolet 1942-55 Bumper, rubber, radiator grille, lower panel.Length: 2.1875 inches.
Pad, rear license light and trunk handle body.Length: 7.50 inches.
Tape, black bowdrill cloth. Adhesive backed, used to create cloth cover surface for side rail weatherstrips typically. Five (5) inches by five (5) foot roll. Pressure sensitive, for covering convertible side window weatherstrip such as our #70-1170-99 or
Insulator (hanger) tailpipe to frame. See also our #70-0600-13.Length: 3.9375 inches. Width: 1.9375 inches.
Mounting pads, trunk hinge. Four (4) piece set.Length: 8.8125 inches.
Boot, gearshift on steering column. Brown rubber. For black see our #30-0069-36. Two and one eighth (2-1/8) inch long style.
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.
Grommet, brake and clutch pedal floor seal.Width: 1.8125 inches. Height: 2.375 inches.
Steering column grommet
Grommet, brake and clutch pedal shank above floorboard. Special offset pattern as original.
Gasket, parking light lens. Top quality, one eighth (1/8) inch sponge.Length: 6.3125 inches. Width: 2.0 inches.
Mounting pad, trunk handle escutcheon.Length: 6.75 inches.
Filler valance or deflector, rear. Eight (8) inches long (cut shorter where required), three (3) to four (4) required per car.
Gasket, parking light housing.Length: 6.625 inches.
Boot, parking light socket.
Pad, brake and clutch pedal.Length: 3.5 inches. Width: 2.5 inches.
Seal, accelerator rod through floorboard.
Anti-squeak, hood to cowl, two (2) piece set for right and left.Length: 38.0 inches. Width: .625 inches. Height: .21875 inches.
Weatherstrip, door window at beltline, outer, (scraper type). Each strip approximately twenty six (26) inches to twenty seven (27) inches long.
Pads, brake and clutch pedal. Concentric circle design.
Bushings, stabilizer bar. Front.
Grommet, fuel filler neck (1955-1st type). Oblong fully molded rubber with retaining flange. Three and seven eighths inch (3 7/8") outside width by five and one eight inch (5 1/8") outside length by one and one eighth inch (1 1/8") height. Two and one eig
Gasket, license light lens. One (1) per car.
Hood Rest Pad. Molded rubber with a steel core. Six (6) required per car. Length: 1.75 inches Width: 1.625 inches.
Grommet, speedometer cable through firewall. Retained by steel collar (not included). Two and one half (2-1/2) inch outside diameter.
Grommet, fuel filler neck. Fully molded rubber. Three and one fourth inch (3 1/4") outside diameter by two and one half inch (2 1/2") inside diameter.
Grommet, firewall, vacuum antenna line through firewall. Four holes provided but three left masked for use if needed.
Gasket, taillight lens.Length: 5.125 inches. Width: 1.875 inches.
Pad, brake and clutch pedal. Black rubber. For brown see our part #50-0054-89. Perfect copy, fine detail.Width: 3.125 inches. Height: 2.125 inches.
Starter button, push on replacement to rod. Two (2) inch outside diameter.
Gasket, cowl vent.
Bumper, back door check link above door. Dovetail base fits check arm.Length: 1.0 inches. Width: 1.0 inches. Height: .625 inches.
Pad, deck handle base.
Seal, lower suspension arm, inner. Four (4) piece set.
Seal, front fender to cowl. Soft pliable sponge rubber designed to accurately fill the gaps between the back side of the fender and cowl. May be supplied as single strip that customer will have to cut in order to facilitate installation.
Boot, brake master cylinder rod. Fits on one and one fourth (1-1/4) inch diameter cylinder. Height: 2.125 inches.
Insulators, front coil spring. Fabric reinforced rubber as original.
Grommet, fuel neck through inner panel.
Pad, brake and clutch pedal. Length: 3.75 inches. Width: 2.375 inches.
Pad, rear spring insulator for two and one fourth (2-1/4) inch wide springs. (see our number 70-0191-32 for two (2) inch springs). Four (4) per vehicle.
Bumper, brake or clutch pedal to floorboard. Longer type with one and three eighths (1-3/8) inch clearance for pedal shaft.Length: 2.75 inches.
Bumper, brake and clutch pedal shank, rides under floorboard. One and one eighth (1-1/8) inch clearance for pedal shaft. Compare with our #60-0579-24.
Boot, gearshift on steering column. Black rubber. For brown see our #30-0069-89. Two and one eighth (2-1/8) inch long style.Length: 2.25 inches.
Boot, starter solenoid.
Gaskets, front parking light, lens gasket. For lamp base see our #70-2651-16.
Grommet, firewall, vacuum operated radio antenna lines.
Pad, starter pedal. Original pattern, brown rubber, exact copy.Height: .50 inches.
Boot, gear shift. Taupe.
Pedal, accelerator. Original type.
Bumper kit, hood.
Channel, quarter window glass to stainless frame rubber.
Cover, tailgate chain rubber. Cover only. Chain NOT included.
Weatherstrip, lower door. Heavy type with original ribbing and retainer lip.
Insulator, exhaust system, muffler pipe bracket. Also intermediate pipe bracket on extra-long body styles. Two (2) required per car, most models.
Grommet, carpet. Floor front carpet grommet use for power brake hole.
Grommet, wire harness-thru-firewall mat. Two (2) inch diameter with two and one fourth (2-1/4) inch outside diameter flange.
Gasket, divided windshield center post. Combines inner and outer gasket in one piece as original. Seventeen (17) inch to (20) inch lengths.Length: 20.
End nut, check link (rubber bar with steel bar insert). Three fourths (3/4) inch by three fourths (3/4) inch by two (2) inch threaded five sixteenths (5/16) inch. (For round stop nut, see our #70-0326-70).
Seal, steering column tube. Installs under floor mat.
Seal, steering column at toe board, for steering column housing and shifter control shaft jacket. Top quality sponge rubber, accurately cut.
Pad, rear spring insulator for two (2) inch wide springs. (see our number 70-0245-32 for two and one fourth (2-1/4) inch springs). Cloth reinforced. Four (4) per vehicle.
Fender welting. Eight (8) foot length.
Boot, battery cable at starter solenoid.Width: 2.75 inches.
A pair of retainers for lower door seal.
Flanged rubber grommet with metal sleeve bushing. Used as part of the accelerator relay lever. Also used from 1959-61 on all Cadillac models as a bushing for the windshield wiper relay lever adaptor.
Weatherstrips, top of door. One strip is enough for two doors. Cut to fit as needed for all four door upper door openings. Mounts on body from approximately directly above the hinge to near the beltline of the car for the front door opening, and from beltline to beltline for the rear door opening.
This Leading Edge Vertical Weatherstrip seal pair is designed from the original part for superior fitment and seal. Slides into metal retaining channel attached to rear side window and seals between the front door window and the rear quarter window.
Weatherstrips, top of door. Mounts on body from approximately just above the hinge to near the beltline on the lock side of the car. Each door opening strip is made from top quality closed cell sponge rubber approximately 54 inches long.
Boot, electrical connection, generator terminal or ignition coil at engine.
Boot, battery cable at starter solenoid.
Gasket, outside door handle.Length: 3.3125 inches.
Mounting pad, vacuum operated fender mounted antenna with one and one half (1-1/2) inch base.
Weatherstrips, lower back of door.
Headlight housing to fender gasket. Steel rule die-cut replacement for #1320452.
Roller, hood rear center rest.
Lacing, hood cowl.
Hood bumper set. Kit includes two (2) each of our #33-0123-42 bumpers and six (6) each of our #33-0459-42 bumpers.
Pad, body mounting. Fully molded rubber with metal core & locating collar. One and seven eighths inch (1 7/8") outside diameter by one and one eighths inch (1 1/8") locating collar outside diameter by three fourths inch (3/4") locating collar inside diame
Vent window division post seal. Single approximate 32 inch strip of original cross section extruded rubber that must be cut in half to complete a pair for both the driver and passenger side door vents. To install this part, one typically uses an ad
Bumper stops for the glovebox door - lower. Rubber Coated Steel like original. This part prevents the glovebox door from opening too far, reduces paint-chipping.
Cover, starter pedal button. Rubber slip over type for old metal. Two (2) inch outside diameter. If car doesn't have old metal, see our #60-0322-21.
Pad, hood rest, front, metal core with non-spring tabs, otherwise as original, six (6) per car.
Bumper, door, lower, held by one (1) screw and one (1) carrot retainer.Length: 1.125 inches. Width: .625 inches.
Bumper, trunk lid.Length: 1.50 inches. Width: 1.0 inches.
Hose, cowl vent drain.Length: 7.25 inches.
Pad, mounting, hydraulic pump. Used on models with hydraulic window lifts or hydraulic convertible top. Two (2) to three (3) required. per car.
Grommet, speedometer cable through firewall (lower).
Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.