Need Assistance?

We are here to help.

Call 800-447-0849

114 items found matching 1948 Oldsmobile Futuramic Series 98 2 door Convertible
Windshield Gasket Set

p/n: 70-0584-50

This Windshield Gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it. It has properly molded corners to precisely conform to the glass and molded sections for the wiper transmissions.

$538.49/set
Made to Order Takes 5-7 Days
Convertible Roof Rail Weatherstrip

p/n: 70-0380-65

This Convertible Roof Rail Weatherstrip fits on the folding roof of the vehicle and seals the side window when the window is fully raised. Fully molded with metal core.

$525.79/set
In Stock
Front Door Vent Window Set

p/n: 90-0379-90

This four (4) piece Front Door Vent Window Set contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$295.30/set
Kit
Front Bow Weatherstrip

p/n: 70-0913-64

Weatherstrip, windshield header to convertible front bow. Correct holes for locking pins.Length: 52.75 inches.

$264.29/ea.
Made to Order Takes 5-7 Days
Front Door Vent Window Weatherstrips

p/n: 38-0036-55

These Front Door Vent Window Weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$242.89/pr.
Made to Order Takes 5-7 Days
Hood to Cowl Weatherstrip

p/n: 70-1211-42

Weatherstrip, hood to cowl. High quality rubber molded in one piece as original.

$238.99/ea.
In Stock
Engine Mount Service – Revulcanization Only

p/n: 25-0072-11

This Revulcanization Service Only is designed to restore your Right and Left Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.

$216.59/pr.
Call or Email
Engine Mount Service – Revulcanization Only

p/n: 25-0057-11

This Revulcanization Service Only is designed to restore your Rear Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.

$207.69/pr.
Call or Email
Hinge Pillar Weatherstrip

p/n: 70-0378-63

Convertible Hinge Pillar Weatherstrip - Attaches to the body and seals between the A-pillar post and the front section of the door or vent window frame when the door is closed. Note: order #70-0379-68 hardtop roof rail seals separately.

$176.99/pr.
In Stock
Rear axle bushing

p/n: 25-0081-32

Insulators, rear axle housing, upper and lower. Four (4) piece set.

$154.99/set
Made to Order Takes 5-7 Days
Engine Mount Service – Revulcanization Only

p/n: 25-0077-11

This Revulcanization Service Only is designed to restore your Front Lower Engine Support Mount to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.

$139.39/ea.
In Stock
Engine Mount Service – Revulcanization Only

p/n: 25-0062-11

This Revulcanization Service Only is designed to restore your Front Upper Engine Mount at Crossmember to a like new original condition. Service requires your metal core. Please call or email for more service details and ordering.

$128.99/ea.
Call or Email
Trunk Weatherstrip

p/n: 70-0874-84

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$125.29/ea.
In Stock
Rear axle bushing

p/n: 25-0082-32

Bushing, rear axle support arm. Four (4) piece set.

$125.19/set
In Stock
Rigid Run Channels

p/n: 70-0536-58

A Rigid Run Channel pair with bright beaded edge, mohair lined channel, die trimmed and round formed at the top. Sold in 29" pairs.

$117.19/pr.
In Stock
Chrome Fender Welting - 50ft

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$104.99/ea.
In Stock
Fender Welting 1/4" Bead - 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body.

$104.99/ea.
In Stock
Fender Welting with 3/16" Bead - 50ft

p/n: 70-1100-44

A superior quality Fender Welting material constructed of reinforced black vinyl over a vinyl core. Typically used for attaching four (4) fenders to body. Sold in a 50 foot roll.

$104.99/ea.
In Stock
Fender Skirt Edge Weatherstrip

p/n: 70-0154-45

This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment, finish, and seal. This weatherstrips fits between the rear wheel fender skirt and the rear fender quarter panel.

$93.39/pr.
In Stock
Fender Skirt Edge Weatherstrip

p/n: 70-0289-45

This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment, finish, and seal. This weatherstrips fits between the rear wheel fender skirt and the rear fender quarter panel.

$92.49/ea.
In Stock
Convertible Roof Rail Bumper

p/n: 70-1023-67

Bumper, convertible top. Fully molded with threaded metal core. Excellent quality.

$88.29/pr.
Made to Order Takes 5-7 Days
Door Bumper

p/n: 70-0168-71

Bumper, door side. Square type held by four (4) screws, metal core as original.

$85.89/pr.
In Stock
Fender Skirt Edge Weatherstrip

p/n: 20-0111-44

This Fender Skirt Edge Weatherstrip pair is designed from the original part for superior fitment, finish and sealing function. Two five (5) foot strips that fit between the rear wheel fender skirt and rear quarter panel.

$85.79/pr.
In Stock
Front Bow Corner Filler

p/n: 70-0975-67

Filler, front corner of convertible top front bow. Made from soft durable rubber. Includes separate brass retainers.

$83.69/pr.
In Stock
Stabilizer Bar End Link Set

p/n: 70-0567-34

Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt. 5/16"-24NF x 7-5/8" long. Includes metal sleeves, cup washers and rubber grommets.

$81.89/set
In Stock