Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

133 items found matching 1949 Buick Roadmaster 2 door Hardtop
Hardtop roof rail weatherstrip

p/n: 70-0379-68

Hardtop roof rail weatherstrip (Main seal). This part fits on the roof of the vehicle and seals the side window when the window is fully raised. Note: order #70-0378-63 hinge pillar seal separately.

$434.79/set
In Stock
Windshield Gasket Set

p/n: 70-0584-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it. It has properly molded corners to precisely conform to the glass and molded sections for the wiper transmissions. It also has the slot to accommodate the locking strip.

$433.59/set
Made to Order Takes 2-3 Days
Rear Window Gasket Set

p/n: 70-0583-81

This rear window gasket set contains the rear window gasket itself and the locking strip. The gasket has the divider bars molded directly into it and has molded corners for a precise, factory fit.

$431.99/set
In Stock
Front Door Vent Window Kit

p/n: 90-0379-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$230.99/set
Kit
Front Door Vent Window Weatherstrips

p/n: 38-0036-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$193.29/pr.
In Stock
Axle rebound pad

p/n: 50-0371-35

Bumper, rear axle. Revulcanization service only.Height: 3.5 inches.

$159.79/pr.
In Stock
Trunk Weatherstrip

p/n: 70-0870-84

This trunk weatherstrip set is designed from original parts for superior fitment and seal. The set contains the strips and corners that mount to the body and the strip that mounts to the lid.

$145.59/set
In Stock
Hood to cowl weatherstrip

p/n: 50-0167-43

Weatherstrip, hood to cowl. 56 1/2 " long. Note: compare to #50-0436-43 hood to cowl sold separately.

$145.39/ea.
In Stock
Motor mount service

p/n: 50-0297-11

Motor mount, front. Revulcanization service only.Qty Required:2 Length: 3.375 inches. Width: 2.625 inches. Height: 1.25 inches.

$143.89/pr.
Call or Email
Hinge Pillar Weatherstrip

p/n: 70-0378-63

Convertible Hinge Pillar Weatherstrip - Attaches to the body and seals between the A-pillar post and the front section of the door or vent window frame when the door is closed. Note: order #70-0379-68 hardtop roof rail seals separately.

$138.39/pr.
In Stock
Transmission mount service

p/n: 50-0264-25

Support pad, transmission mount (insulator). Revulcanization service only.Length: 5.0 inches. Width: 2.0 inches.

$109.19/ea.
Call or Email
Transmission mount service

p/n: 50-0263-25

Support, transmission (insulator). Revulcanization service only. See also our #50-0262-25, many models use both.Length: 5.0 inches. Width: 1.875 inches.

$105.49/ea.
Call or Email
Transmission mount service

p/n: 50-0262-25

Pad, transmission mounting, thrust. Revulcanization service only. One (1) per car required. See also our #50-0263-25. Many models use both.Length: 7.

$103.59/ea.
Call or Email
Torque ball service

p/n: 50-0190-27

Retainer, torque ball, heavy steel jacket with molded rubber inner collar. Revulcanization service only.

$101.39/ea.
Call or Email
Rigid Run Channel

p/n: 70-0536-58

Rigid, bright beaded edge, mohair lined channel, die trimmed and formed at top. Available in 29" pairs.

$88.99/pr.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$79.49/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$79.49/ea.
In Stock
Fender welting 50ft chrome

p/n: 70-1102-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five (25) foot roll see #70-1101-44.

$79.49/ea.
In Stock
Trunk Weatherstrip Corners

p/n: 60-0511-85

These trunk weatherstrip corners are designed from the original part for superior fitment and seal. The seals mount to the front corners of the trunk directly to the body.

$73.29/pr.
In Stock
Fenderskirt Edge Seal

p/n: 70-0154-45

Seal, fenderskirt edge, exact copy, trim notch for skirt lock at installation. Compare sketch with your original to be sure. Two (2), five (5) foot strips.

$70.69/pr.
In Stock
Fenderskirt edge seal

p/n: 70-0289-45

Seal, fenderskirt edge. Good quality and workmanship, see sketch for comparison. Ten (10) foot strip.Length: 120.0 inches. Width: .1875 inches.

$69.99/ea.
In Stock
Door bumper

p/n: 70-0168-71

Bumper, door side. Square type held by four (4) screws, metal core as original.

$64.99/pr.
In Stock
Torque ball boot

p/n: 50-0178-27

Boot, torque ball.

$64.89/ea.
In Stock
Stabilizer Bar End Link Set

p/n: 70-0567-34

Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt. 5/16"-24NF x 7-5/8" long. Includes metal sleeves, cup washers and rubber grommets.

$61.99/set
In Stock
Brown accelerator pedal pad

p/n: 50-0160-89

Pad, accelerator pedal. Brown rubber. For black see our #50-0160-40. Slip-over type for old core, perfect copy.Color:brown Length: 9.0 inches.

$60.39/ea.
In Stock
Hood fastener seal plate

p/n: 50-0225-42

Seal plate, hood fastener control, cable through firewall. Rubber with brass core.

$60.39/ea.
In Stock
Rear coil spring pad

p/n: 50-0359-35

Insulators, rear coil spring. Fabric reinforced rubber as original. One (1) pair per car.

$56.39/pr.
In Stock
Accelerator pedal pad

p/n: 50-0160-40

Pad, accelerator pedal. Black rubber. For brown see our #50-0160-89. Slip-over type for old core, perfect copy.Length: 9.0 inches.

$54.59/ea.
Made to Order Takes 1-2 Days
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

$54.29/pr.
In Stock
Beltline Weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 3ft pair.

$51.59/pr.
In Stock
Headlight Door To Lens Seal

p/n: 70-0389-14

Headlight door to lens seal. Molded without wire. Single lip type for sealed beams.

$50.19/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-0924-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$49.89/pr.
In Stock
Front suspension bumper

p/n: 50-0091-32

Bumper, front suspension, upper arm.Height: 2.0 inches.

$49.79/pr.
In Stock
Front stabilizer bushing

p/n: 50-0094-34

Bushings, front stabilizer shaft-to-frame or stabilizer shaft, front or rear. Fully molded rubber. One and one half inch (1 1/2") length by one and one half inch (1 1/2") width by eleven sixteenths inch (11/16") inside hole diameter by one and one half in

$48.39/pr.
In Stock
Brown brake and clutch pad

p/n: 50-0054-89

Pad, brake and clutch pedal. Brown rubber. For black see our part #50-0054-22. Perfect copy, fine detail.Color:brown Width: 3.125 inches.

$47.99/pr.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$46.99/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$46.99/ea.
In Stock
Sliding Quarter Window Weatherstrip

p/n: 70-0353-78

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 6ft lengths.

$46.99/ea.
In Stock
Front suspension bumper

p/n: 50-0092-32

Bumper, front suspension, lower arm. Steel core, with threaded stud, as original. Two (2) per car required.

$46.19/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$45.19/ea.
In Stock
Door bumper

p/n: 34-0469-71

Bumpers, front door, upper. Approximately five eighths (5/8) inch square, three eighths (3/8) inch inside diameter. Steel core, retained by screw.

$44.69/pr.
In Stock
Headlight Mounting Pad

p/n: 70-0201-14

Headlight body mounting gasket. Rubber.

$44.49/pr.
In Stock
Backup light gasket

p/n: 50-0438-17

Gasket, backup light housing. One (1) pair per car.

$43.89/pr.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$42.29/ea.
In Stock
Rigid Run Channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining. Available in 15" pairs.

$38.99/pr.
In Stock
Division bar chrome retainer

p/n: 70-0373-51

Retainer, for outside windshield center post stainless molding. Use with original stainless molding and clips.Length: 15.5 inches. Width: 1.25 inches.

$36.39/ea.
In Stock
Brake and clutch shank seal

p/n: 50-0066-24

Grommet, brake and clutch pedal floor seal.Width: 1.8125 inches. Height: 2.375 inches.

$35.19/pr.
In Stock
Brake and clutch pedal pad

p/n: 50-0054-22

Pad, brake and clutch pedal. Black rubber. For brown see our part #50-0054-89. Perfect copy, fine detail.Width: 3.125 inches. Height: 2.125 inches.

$31.19/pr.
In Stock
Front coil spring pad

p/n: 50-0358-35

Insulators, front coil spring. Fabric reinforced rubber as original.

$29.89/pr.
In Stock
Taillight lens gasket

p/n: 50-0449-15

Gasket, taillight lens. Die cut from three sixteenths (3/16) inch sponge.Width: 8.75 inches. Height: 3.875 inches.

$28.99/pr.
In Stock