Search Results
Please click on the part name in red in order to get a complete description.
Glass Run and Window Felt Kit
p/n: 20-0472-60
Glass Run and Window Felt Kit - A deluxe kit for both doors which includes the back edge of vent window seal installed, beltline weatherstrips (clips included, not installed), door glass runs with rivets and original-type vent bar channel with brackets riveted in place. A complete kit designed from original parts.
Windshield Gasket
p/n: 70-2457-50
This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding.
Front Door Vent Window Kit
p/n: 90-0303-90
This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.
Front Door Vent Window Weatherstrips
p/n: 20-0468-55
These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.
Front Door weatherstrip
p/n: 20-0499-72
Door edge weatherstrip. This part is the primary door to body weatherstrip.
Windshield Gasket
p/n: 20-0463-50
This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Vent division bar assembly
p/n: 20-0476-62
Assembly, complete division bar. Left-side ONLY. Ready to install. Comes complete with brackets and back of vent window seal.
Vent division bar assembly
p/n: 20-0475-62
Assembly, complete division bar. Right-side ONLY. Ready to install. Comes complete with brackets and back of vent window seal.
Window Felt Beltline Weatherstrip
p/n: 20-0471-60
Side window horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered.
Gearshift boot
p/n: 20-0334-26
Boot, floor mounted gear shift. Black.Width: 4.0 inches. Height: 5.0 inches.
Rear Window Gasket
p/n: 20-0479-81
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Body mounting pad kit
p/n: 20-0459-48
Kit, cab to frame pad and bushing. Includes: two (2) 7C-5360; four (4) 7C-5387; four (4) 7C-5370-S; four (4) 7C-5371-S.
Vent Window Division Bar Weatherstrip
p/n: 20-0470-56
Vent Window Division Bar Weatherstrip - The front vent window division post seal. Fully molded in high quality rubber and with a metal core. This part fits opposite the glass run channel and seals the vent window when the vent is closed. Part installs using the included rivets.
Fabric hood lacing
p/n: 20-0354-42
Lacing, hood cowl. Forty nine (49) inches long. Cloth anti-squeak material where hood rests on cowl. Includes tacks.
Gearshift floorplate
p/n: 20-0464-88
Seals, transmission cover to floor. Cork and rubber. Three (3) piece set.
Drag Link repair kit
p/n: 20-0506-32
Kit, drag link end repair. Kit includes: 1-3336, 1-3326, 1-3327, 2-3320, 1-3328. Two (2) kits required per drag link.
Motor mount kit
p/n: 20-1978-11
Kit, motor mount. Enough for one motor mount. Kit includes one (1) each of 78-6029-A, B-6038-C, 78-6048-A, B-6039-A, and B-6047.
Cowl to fender seal
p/n: 20-0443-45
Seal, front fender to cowl. Soft pliable sponge rubber designed to accurately fill the gaps between the back side of the fender and cowl. May be supplied as single strip that customer will have to cut in order to facilitate installation.
Gearshift grommet
p/n: 20-2460-26
Repair kit, gear shift lever grommet. Column shift only. Two (2) kits required.
Axle rebound pad
p/n: 20-0833-32
Bumper, front axle. Fully molded with retaining bolt. Typically order two (2) per truck.
Steering column floorplate
p/n: 20-0452-88
Seal, steering column to floor mat. Floor shift models. Includes hold down clips.
Steering column floorplate
p/n: 20-0451-88
Seal, steering column to floor mat. Column shift models. Installs on top of mat.
Motor Mount
p/n: 20-1538-11
Front or rear upper motor mount. Useage: Front motor mount for 1932-1947 Ford Trucks with 6 and 8 cylinders. Front motor mount for 1948-1951 Ford Trucks F-1, F-2, F-3. Two (2) required for trucks. Also used for 1932-1948: Ford & Mercury cars as a front
Steering column floorplate
p/n: 20-0449-88
Seal, brake, clutch and steering column to floor. Column shift models. Installs under metal plate at floor.
Vent division bar weatherstrip
p/n: 20-0469-56
Front vent window division post seal. Extruded rubber strip only that will have to be attached to division post.
Motor mount
p/n: 20-1539-11
Mount, front motor. Lower.Ford Truck 1932-47: All Ford Trucks, 2 each required. 1948-51: Ford F100 Series both 6 or 8 cylinder, 1 each required.
Motor mount bolt
p/n: 20-0309-11
Bolt, front or rear motor mount.Ford Truck 1932-51 Bolt, front motor mount. 2 per truck except as noted.
Radiator splash shield
p/n: 20-0484-45
Seal, lower radiator grille splash pan to radiator. Twenty nine (29) inches long.
Steering column floorplate
p/n: 20-0450-88
Seal, brake, clutch and steering column to floor. Floor shift models.
Taillight lens gasket
p/n: 20-1988-15
Gasket, taillight lens. Inner and outer seal. Enough for one taillight lens.
Body Hole Plug
p/n: 20-1041-21
Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one seven eighths (1-7/8) inch in diameter.
Motor mount pad
p/n: 20-0442-11
Washer, front upper motor mount. Used between mount and frame. Two (2) per truck.
Body mounting pad
p/n: 20-0458-48
Bushings, rear of cab to frame suspension arm. Set of four (4) pieces.
