Search Results

35 items found matching 1952 DeSoto Custom 2 door Hardtop
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Door weatherstrip

p/n: 40-0467-73

Weatherstrip, door hinge pillar. Molded with metal core and attaching tabs.

$316.20/pr.
Made to Order Takes 2-3 Days
Front Door Vent Window Kit

p/n: 90-0357-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$317.70/set
$301.80/set
5% discount
Kit
Front Door Vent Window Weatherstrips

p/n: 40-0339-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$297.10/pr.
Made to Order Takes 2-3 Days
Rear Window Gasket Set

p/n: 70-1758-81

This rear window gasket set contains the rear window gasket itself and the locking strip. The gasket has the divider bars molded directly into it and has molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

$264.40/set
Made to Order Takes 2-3 Days
Windshield Gasket

p/n: 40-0247-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it. It has properly molded corners to precisely conform to the glass and has the slot to accommodate the outer edge's decorative molding.

$259.80/ea.
Made to Order Takes 2-3 Days
Motor mount service

p/n: 40-0491-11

Support, upper engine rear. Revulcanization service only.

$150.30/pr.
Call or Email
Vacuum brake diaphragm

p/n: 40-0114-24

Diaphragm, vacuum brake.

$140.70/ea.
Made to Order Takes 1-2 Days
Window weatherstrip

p/n: 40-0096-77

Weatherstrip, back and quarter window, 12 foot strip. For vehicles without reveal molding where we are not currently offering a molded gasket ring, or customer is modifying the glass openings.

$137.00/ea.
In Stock
Motor mount service

p/n: 40-0410-11

Front motor mount. Revulcanization service only. Send in core and allow three weeks for service. 6 cylinders only.

$104.70/ea.
Call or Email
Vent window weatherstrip

p/n: 40-0502-57

Weatherstrip, or cushion for under vent window frames.Length: 4.375 inches.

$97.90/pr.
In Stock
Trunk Weatherstrip

p/n: 70-1691-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$94.10/ea.
In Stock
Fender welting 1/4" bead 50ft

p/n: 70-1098-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide. One fourth (1/4) inch bead, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty five

$76.30/ea.
In Stock
Fender welting 3/16 bead 50ft

p/n: 70-1100-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, fifty (50) foot roll. Typically used to attach four (4) fenders to body. For twenty fi

$76.30/ea.
In Stock
Cowl vent gasket

p/n: 40-0245-54

Gasket, cowl vent.Length: 17.25 inches.

$65.30/ea.
In Stock
Motor mount

p/n: 70-2577-11

Cushion, engine lower support. One (1) pair required per car.

$61.40/pr.
In Stock
Steering column grommet

p/n: 40-0421-36

Grommet, steering column and transmission shift rod through firewall.Length: 4.375 inches.

$59.90/ea.
In Stock
Hood to radiator weatherstrip

p/n: 70-1580-42

Weatherstrip, hood to radiator shroud.Width: 1.3125 inches.

$52.60/ea.
In Stock
Beltline weatherstrip

p/n: 40-0539-57

Window felt inner and/or outer. One (1) pair of three (3) foot lengths. Flexible, pile lined, rubber covered, with black bead. For front door, rear door and quarter windows.

$48.50/pr.
In Stock
Fuel neck grommet

p/n: 70-1616-39

Grommet, fuel neck. Fully molded rubber with retaining flange. Three and eleven sixteenths inch (3 11/16") outside diameter by two and one eighth inch (2 1/8") inside hole diameter by nine sixteenths inch (9/16") height.

$46.70/ea.
In Stock
Fender welting 1/4" bead 25ft

p/n: 70-1097-44

Welting, fender. Superior quality, proper construction of reinforced vinyl over vinyl core, one and three eighths (1-3/8) inch wide, black only. One fourth (1/4) inch bead, twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For

$43.40/ea.
In Stock
Fender welting 3/16 bead 25ft

p/n: 70-1099-44

Welting, fender. Superior quality, proper construction of reinforced black vinyl over vinyl core, one and three eighths (1-3/8) inch wide, three sixteenths (3/16) inch, twenty five (25) foot roll. Typially used for attaching two (2) fenders to body. For f

$41.80/ea.
In Stock
Front coil spring pad

p/n: 40-0457-32

Front coil spring pad

$37.50/pr.
In Stock
Hood to radiator weatherstrip

p/n: 40-0512-42

Weatherstrip, hood to grill or radiator shroud. Two (2) pieces, each sixteen (16) inches.Width: 1.3125 inches.

$35.90/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-1432-56

Vent window division post seal. Single approximate 32 inch strip of original cross section extruded rubber that must be cut in half to complete a pair for both the driver and passenger side door vents. To install this part, one typically uses an ad

$20.60/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Spring shackle bushing

p/n: 40-0183-32

Bushing, spring and shackle, front and rear leaf springs. Eight (8) or twelve (12) required per car.Length: 1.25 inches. Height: 1.25 inches.

$7.40/ea.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 30-0356-WT

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$6.60/ft.
In Stock
Run channel mohair liner

p/n: 70-2863-58

Liner, mohair. Liner with a rubber backing. Apply with adhesive to division bars and channels. Helps reline guide bars on lock side of hardtops and convertibles.

$6.39/ft.
In Stock
Trunk Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 30-0356-85

Trunk weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$6.30/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock