Search Results

33 items found matching 1953 GMC Series 150-22 2 door Chassis and Cab
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Side Window Run Channel Kit

p/n: 70-2485-58

Eight (8) piece set. Set includes run channel and beltline weatherstrip.

In Stock
Front Door Weatherstrip Kit

p/n: 90-0124-72

Door weatherstrip kit. This kit is the primary seal for the door to the body. Set includes the door bottom and perimeter seals that attach to the body and the door edge weatherstrip that attaches to the door.

In Stock
Front Door Vent Window Weatherstrip Set

p/n: 60-0065-55

This front door vent window weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit. The division post seals contain a brass core for durability and easy installation.

In Stock
Windshield Gasket

p/n: 60-0083-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit.

In Stock
Windshield Gasket

p/n: 60-0169-50

This windshield gasket mounts around the full perimeter of the front glass and has the divider bar molded directly into it for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

Made to Order Takes 2-3 Days
Windshield Gasket

p/n: 70-1945-50

This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

In Stock
Rigid run channel

p/n: 60-0073-58

Channel, rigid division bar. Un-beaded, cloth covered, mohair lined. Perfect replacement requires drilling for screws.

In Stock
Headlight Door To Lens Seal

p/n: 70-0493-14

Headlight Door To Lens Seal - Molded without wire. Double lip type for sealed beam headlights. Note: Compare with our single lip type #70-0389-14 sold separately.

In Stock
Beltline weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Seven sixteenths (7/16) inch wide, with chrome bead, mohair faced, flexible. Two (2) three (3) foot strips. Bend to fit.

In Stock
Vent division bar weatherstrip

p/n: 60-0663-56

Front vent window division post seal. Fully molded with metal core and attaching tabs. This part fits opposite the glass run channel and seals the vent window when the vent is closed. See Front door vent weatherstrip for main rubber seal.

In Stock
Flexible Run Channel

p/n: 70-1107-57

Channel, flexible window run, un-beaded. Five eighths (5/8) inch wide, five (5) foot long. Cloth covered mohair-lined type. For sides and top of side windows. High quality, perfect copy. Applications with vent window use a five (5) ft. strip. Applications

In Stock
Accelerator pedal pad

p/n: 60-0301-41

Pad, accelerator pedal. Slipover cover type. Exact copy. Fits original steel core.Length: 8.0 inches.

Made to Order Takes 1-2 Days
Headlight Mounting Pad

p/n: 70-0201-14

Headlight body mounting gasket. Rubber.

In Stock
Cowl vent gasket

p/n: 60-0124-54

Gasket, cowl vent. Original labyrinth style, not sponge.Length: 16.5 inches. Width: 4.0 inches.

In Stock
Hood to cowl weatherstrip

p/n: 60-0056-42

Anti-squeak, hood to cowl. Five eighths (5/8) inch by seven thirty seconds (7/32) inch. One eight (8) foot strip per vehicle.Length: 96.0 inches.

In Stock
Brake and clutch pedal pad

p/n: 60-0242-22

Pad, brake and clutch pedal.Length: 3.5 inches. Width: 2.5 inches.

In Stock
Door weatherstrip

p/n: 60-0313-73

Weatherstrip, door bottom. Retained by metal strip, black only. Each strip approximately thirty two and one half (32-1/2) inches long.

In Stock
Belt line weatherstrip

p/n: 60-0287-58

Weatherstrip, door window at beltline, outer, (scraper type). Each strip approximately twenty six (26) inches to twenty seven (27) inches long.

In Stock
Fuel neck grommet

p/n: 60-0271-41

Grommet, fuel filler neck. Oblong shaped molded rubber with retaining flange. Three and three fourths inch (3 3/4") outside length by three and five eighths inch (3 5/8") outside width. Two and thirteen sixteenths inch (2 3/16") inside hole width by two

In Stock
Brake and Clutch Pedal Pad

p/n: 60-0218-22

Pad, brake and clutch pedal. Length: 3.75 inches. Width: 2.375 inches.

In Stock
Door weatherstrip

p/n: 60-0078-73

Weatherstrip, lower door. Heavy type with original ribbing and retainer lip.

In Stock
Cowl vent hose

p/n: 60-0381-54

Hose, cowl vent drain.Length: 7.25 inches.

In Stock
Gearshift bushing

p/n: 60-0237-24

Bushing, gearshift shaft lever, larger type. Three eighths (3/8) inch inside diameter by nine sixteenths (9/16) inch outside diameter barrel.Height: .

In Stock
Shock Absorber Grommet

p/n: 60-0458-32

Grommet, shock absorber

In Stock
Rear spring bushing

p/n: 60-0236-48

Bushing, body shackles.Length: 1.125 inches.

In Stock
Door weatherstrip

p/n: 70-0219-73

Weatherstrip, door edge, constant section on some models. Five eighths (5/8) inch by (5/8) inch cross-section, high grade, fine grain sponge rubber.

In Stock
Peel-N-Stick Door Weatherstrip

p/n: 70-0145-WT

Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Excellent for use in many different applications and on many different vehicle models.

In Stock
Shock absorber grommet

p/n: 60-0235-33

Grommet, shock absorber mounting, plain cylinder type with flat ends.

In Stock
Door Weatherstrip (Sponge Rubber Extrusion - General Use)

p/n: 70-0145-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

In Stock
Flexible run channel

p/n: 60-0451-58

Retainer clip for flexible run channel. For sides and top of side window. Tempered spring steel.Length: 1.3125 inches. Width: .5625 inches.

In Stock
Run Channel Clip

p/n: 60-0374-58

Clip, end of door window run channel. Tempered spring steel. Length: 1.8125 inches. Width: .50 inches.

In Stock
Shock absorber bushing

p/n: 70-0541-33

Bushing, shock absorber mounting. Five eighths (5/8) inch hole, one and one fourth (1-1/4) inch outside diameter, five eighths (5/8) inch thick.

In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

In Stock