Search Results

760 items found matching 1954
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Steel sash channel

p/n: 20-3056-58

Channel, rear door sash. Right side.

$52.70/ea.
Ships in 3-4 Days
Steel sash channel

p/n: 20-3048-58

Channel, front door sash. Right side.

$52.70/ea.
In Stock
Steel sash channel

p/n: 20-3057-58

Channel, rear door sash. Left side.

$52.70/ea.
Ships in 3-4 Days
Steel sash channel

p/n: 20-3044-58

Channel, front door sash. Right side.

$52.70/ea.
Ships in 3-4 Days
Hood to radiator weatherstrip

p/n: 70-1580-42

Weatherstrip, hood to radiator shroud.Width: 1.3125 inches.

$52.60/ea.
In Stock
Headlight Door To Lens Seal

p/n: 70-0493-14

Headlight Door To Lens Seal - Molded without wire. Double lip type for sealed beam headlights. Note: Compare with our single lip type #70-0389-14 sold separately.

$52.10/pr.
In Stock
Motor (Engine) Mount

p/n: 25-0060-11

Motor (engine) mount, lower front. One (1) per car. Length: 4.50 inches.

$52.10/ea.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Channel, rigid run, window division bar. Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar.

$52.10/pr.
In Stock
Ignition cable grommet

p/n: 70-1598-21

Grommet, ignition cable.Length: 2.125 inches. Width: 1.50 inches.

$51.60/ea.
Made to Order Takes 1-2 Days
Front stabilizer bushing

p/n: 30-0298-33

Bushings, front stabilizer rod end. One (1) pair required per car. Fully molded rubber. One and one half inch (1 1/2") length by one and one eighth inch (1 1/8") width by three fourths inch (3/4") inside hole diameter by one and one half inch (1 1/2") hei

$50.00/pr.
In Stock
Convertible top rest block

p/n: 60-0209-67

Bumper, folding top, side roof rail slat iron. Brass core as original. Two (2) or four (4) per car as required for front and center.Width: 1.5 inches.

$49.20/pr.
In Stock
Front Stabilizer Bar End Link Kit

p/n: 70-2108-33

Kit, front stabilizer bar link assembly replacement. Twenty-two (22) piece set. Set for both sides of one car. Hex head bolt. 5/16"-24nf x 6-9/16" lg. Comes with metal sleeve, metal cup washers and rubber grommets.

$49.00/pr.
In Stock
Windshield weatherstrip

p/n: 70-3004-42

Weatherstrip, hood-to-windshield.

$49.00/ea.
In Stock
Beltline weatherstrip

p/n: 40-0539-57

Window felt inner and/or outer. One (1) pair of three (3) foot lengths. Flexible, pile lined, rubber covered, with black bead. For front door, rear door and quarter windows.

$48.50/pr.
In Stock
Flexible Run Channel 6 Foot

p/n: 70-1239-58

Window run channel with stainless beaded edge. Six (6) foot length. Cloth covered, mohair lined, flexible channel for sides and top of door windows. Exact replacement for listed vehicles but can be used in many applications.

$48.20/ea.
In Stock
Beltline weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Seven sixteenths (7/16) inch wide, with chrome bead, mohair faced, flexible. Two (2) three (3) foot strips. Bend to fit.

$47.70/pr.
In Stock
Fenderskirt edge seal

p/n: 20-3017-44

Seals, fender skirt.

$47.50/pr.
Ships in 3-4 Days
Peel-N-Stick Trunk Weatherstrip

p/n: 20-1389-WT

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$47.50/ea.
In Stock
Side window leading edge

p/n: 20-3127-80

Side window vertical leading edge weatherstrip. Cut to length. Cloth covered. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised. Molded authentic rubber construction, this part doe

$47.50/pr.
In Stock
U Jamb lock pillar filler

p/n: 20-3123-79

Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.

$47.50/pr.
In Stock
Brake and clutch pedal pad

p/n: 20-0494-22

Pads, brake and clutch pedal. Three and one half (3-1/2) inch diameter.

$46.90/pr.
Ships in 3-4 Days
Inner Fender Seal

p/n: 60-0288-45

Inner Fender Seal for anti-rattle, runningboard apron to body, or fender splash panels. Nine sixteenths (9/16) inch by seven eighths (7/8) inch slotted sponge rubber to accept rivets. Sold in eight (8) foot strips.

$46.90/ea.
In Stock
Gearshift boot

p/n: 70-2126-24

Boot, transmission gear hand shift lever. Molded in pliable black rubber which may be painted if needed for restoration.

$46.50/ea.
In Stock
Headlight Door To Lens Seal

p/n: 70-0389-14

Headlight door to lens seal. Molded without wire. Single lip type for sealed beams.

$46.40/pr.
In Stock
Steering column grommet

p/n: 70-0450-88

Grommet, steering column at floor, fits chrome ring.

$46.40/ea.
In Stock
Vent division bar weatherstrip

p/n: 70-0868-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$46.30/pr.
In Stock
Vent division bar weatherstrip

p/n: 60-0663-56

Front vent window division post seal. Fully molded with metal core and attaching tabs. This part fits opposite the glass run channel and seals the vent window when the vent is closed. See Front door vent weatherstrip for main rubber seal.

$46.30/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-1091-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$46.10/pr.
In Stock
Vent division bar weatherstrip

p/n: 60-0534-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$46.10/pr.
In Stock
Vent division bar weatherstrip

p/n: 50-0518-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$46.10/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-0703-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$46.10/pr.
In Stock
Vent division bar weatherstrip

p/n: 60-0494-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$46.10/pr.
In Stock
Front suspension bumper

p/n: 50-0091-32

Bumper, front suspension, upper arm.Height: 2.0 inches.

$46.00/pr.
In Stock
U Jamb lock pillar filler

p/n: 50-0519-79

Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.

$44.90/pr.
Made to Order Takes 2-3 Days
Front Coil Spring Pad

p/n: 50-0476-35

Pad, front coil spring insulator, upper. Two (2) per car, five and one eighths (5-1/8) inch outside diameter. Height: .28125 inches.

$44.70/pr.
In Stock
Front stabilizer bushing

p/n: 50-0094-34

Bushings, front stabilizer shaft-to-frame or stabilizer shaft, front or rear. Fully molded rubber. One and one half inch (1 1/2") length by one and one half inch (1 1/2") width by eleven sixteenths inch (11/16") inside hole diameter by one and one half in

$44.70/pr.
In Stock
Rear spring bushing

p/n: 60-0311-35

Bushing, rear spring front eye, inlox cartridge type as original.

$44.60/ea.
In Stock
Brown brake and clutch pad

p/n: 50-0054-89

Pad, brake and clutch pedal. Brown rubber. For black see our part #50-0054-22. Perfect copy, fine detail.Color:brown Width: 3.125 inches.

$44.40/pr.
In Stock
Flexible Run Channel 5 Foot

p/n: 70-1238-58

Window run channel, stainless beaded edge. Cloth covered, mohair lined flexible metal channel for sides and top of door windows. Perfect dimensions, Five eighths (5/8) inch wide by nine sixteenths (9/16) inch overall height, exact replacement. Five (5) fo

$44.30/ea.
In Stock
Motor mount

p/n: 20-0515-11

Mount, upper motor. One (1) required per truck. 1953-56: F100-F350 239 & 272 V8 and 1953-56: F100 & F250 215 & 223 6 cylinder.

$44.10/ea.
Ships in 3-4 Days
Side roof rail weatherstrip

p/n: 30-0431-65

Weatherstrip, windshield stanchion, on upper body pillar. Correct extrusion cut seventeen (17) inches long.

$44.10/pr.
In Stock
Steel sash channel

p/n: 20-0514-62

Channel, door glass sash. Either right or left.

$44.10/ea.
Ships in 3-4 Days
Beltline Weatherstrip

p/n: 40-0540-57

Window felt inner and/or outer. Single six (6) foot length. Flexible, pile lined, rubber covered, with black bead. For front door, rear door and quarter windows.

$44.00/ea.
In Stock
Radiator top seal

p/n: 40-0459-42

Seal, radiator yoke to air hood. Extruded rubber to original profile. Four (4) foot strip.Length: 48.0 inches. Width: 1.125 inches.

$43.60/ea.
In Stock
Roof rail filler

p/n: 70-2024-73

Seal, roof rail at quarter window. Fully molded with brass core.Length: 1.375 inches. Width: .6875 inches.

$43.50/pr.
In Stock
Sliding Quarter Window Weatherstrip

p/n: 70-0353-78

Weatherstrip, inner and outer for sliding quarter window, chrome beaded, mohair faced, flexible stock. May be formed to required outline. Six (6) foot strip.

$43.50/ea.
In Stock
Fender welting 25ft chrome

p/n: 70-1101-44

Welting, fender, bright chrome vinyl, three sixteenths (3/16) inch bead, one and one half (1-1/2) inch width. Superior quality. Twenty five (25) foot roll. Typically used to attach two (2) fenders to body. For fifty (50) foot roll see our #70-1102-44.

$43.40/ea.
In Stock
Fenderskirt edge seal

p/n: 20-3018-44

Seals, fender skirt. Fits original skirts.

$43.20/pr.
Ships in 3-4 Days
Side window weatherstrip

p/n: 30-0244-57

Window felt inner and/or outer. One (1) pair of three (3) foot lengths. Flexible, pile lined, rubber covered, with black bead. For front door, rear door and quarter windows.

$43.20/pr.
In Stock
Spring seat seal

p/n: 60-0261-32

Seal, rear spring seat. Four (4) piece set.Height: .1875 inches.

$43.20/set
In Stock
Fenderskirt Edge Seal

p/n: 60-0109-45

Fenderskirt Edge Seal - One (1) ten (10) foot strip. Length: 120.0 inches.

$43.10/ea.
In Stock
Front suspension bumper

p/n: 50-0092-32

Bumper, front suspension, lower arm. Steel core, with threaded stud, as original. Two (2) per car required.

$42.70/ea.
In Stock
Parking and signal gasket

p/n: 50-0354-16

Gasket, front parking and signal light to fender. One (1) pair per car. Fits between signal lamp body and headlamp to fender adapter.Width: 4.0 inches.

$42.60/pr.
In Stock
Headlight mounting pad

p/n: 30-0142-14

Gaskets, headlight body mounting to fender. Cut to exact size as original.

$41.80/pr.
In Stock
Front Stabilizer Bushing

p/n: 60-0088-34

Front Stabilizer Bushing - Front stabilizer bar mounting. Fully molded rubber. Two (2) required per car. One and five sixteenths inch (1 5/16") length by one and five sixteenths inch (1 5/16") width by five eighths inch (5/8") inside hole diameter by one and three fourths inch (1 3/4") height.

$41.60/pr.
In Stock
Beltline weatherstrip

p/n: 20-3072-60

Window-felts, quarter window. Right side. Includes staples. One (1) pair does one (1) door.

$41.50/pr.
Ships in 3-4 Days
Beltline weatherstrip

p/n: 20-3073-60

Window-felts, quarter window. Left side. Includes staples. One (1) pair does one (1) door.

$41.50/pr.
Ships in 3-4 Days
Beltline weatherstrip

p/n: 20-3066-60

Window-felts, door glass. Right or left side. Includes staples.

$41.50/pr.
Ships in 3-4 Days
Splash apron

p/n: 70-2772-45

Filler, splash apron. Die cut masticated rubber to authentic original dimensions. Includes all factory style holes required for installation.

$41.50/pr.
In Stock
Flexible Run Channel

p/n: 70-1107-57

Channel, flexible window run, un-beaded. Five eighths (5/8) inch wide, five (5) foot long. Cloth covered mohair-lined type. For sides and top of side windows. High quality, perfect copy. Applications with vent window use a five (5) ft. strip. Applications

$41.40/ea.
In Stock
Accelerator pedal pad

p/n: 60-0301-41

Pad, accelerator pedal. Slipover cover type. Exact copy. Fits original steel core.Length: 8.0 inches.

$41.30/ea.
Made to Order Takes 1-2 Days
Body anti-squeak

p/n: 20-0541-45

Seal, bottom of cab to runningboard.Height: 2.0 inches.

$41.10/pr.
Ships in 3-4 Days
Body anti-squeak

p/n: 20-0542-45

Seal, bottom of cab to runningboard.Height: 2.0 inches.

$41.10/pr.
Ships in 3-4 Days
Fuel neck grommet

p/n: 20-0581-39

Grommet, gas tank neck. Oval shaped. Fully molded rubber with retaining flange. Three and thirteen sixteenth inch (3 13/16") outside width by four and five sixteenths inch (4 5/16") outside length. One and one half inch (1 1/2") inside hole width by two i

$41.10/ea.
Ships in 3-4 Days
Headlight Mounting Pad

p/n: 70-0201-14

Headlight body mounting gasket. Rubber.

$41.10/pr.
In Stock
Hood to cowl weatherstrip

p/n: 70-1698-43

Weatherstrip, hood to cowl.Length: 47.0 inches. Width: .5625 inches. Height: .28125 inches.

$41.00/ea.
In Stock
Gravel shield anti-squeak

p/n: 60-0173-30

Seal, rear bumper face bar-to-body (gravel shield). Fully molded rubber with all original features. Seventy-nine inches (79") long. Extrusion ends measure one and three fourths inch (1-3/4") wide by nine sixteenths inch (9/16") height.

$40.80/ea.
In Stock
Cowl vent gasket

p/n: 40-0500-54

Gasket, cowl vent. Die cut sponge rubber to original dimensions.Length: 19.0 inches.

$40.30/ea.
In Stock
Firewall grommet

p/n: 30-0456-20

Grommet, heater core at firewall.Length: 3.5625 inches. Width: 2.25 inches.

$40.20/ea.
Made to Order Takes 1-2 Days
Parking light lens gasket

p/n: 50-0351-16

Gasket, headlight door parking lens. Constructed out of soft durable rubber.Height: .375 inches.

$40.00/pr.
In Stock
Rigid run channel

p/n: 20-3062-58

Channel, front door division bar.

$39.70/ea.
In Stock
Cowl vent gasket

p/n: 60-0270-54

Gasket, cowl vent. Labyrinth type as original.Length: 16.75 inches.

$39.60/ea.
In Stock
Brake and clutch shank seal

p/n: 70-0465-23

Grommets, brake and clutch pedal shank below floorboard.

$39.30/pr.
In Stock
Handbrake rod grommet

p/n: 30-0453-24

Grommet, handbrake rod to dash.Height: 1.875 inches.

$39.10/ea.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$39.10/ea.
In Stock
Power brake pedal pad

p/n: 50-0349-22

Pedal pad, power brake only, slip-over.Width: 4.75 inches.

$39.00/ea.
Made to Order Takes 1-2 Days
Firewall grommet

p/n: 70-1628-20

Grommet, wiring harness.

$38.90/ea.
In Stock
Fuel neck grommet

p/n: 20-0582-39

Grommet, gas tank neck. Pickup only.

$38.90/ea.
Ships in 3-4 Days
Radiator mounting pad kit

p/n: 20-0570-45

Kit, radiator support to frame pad. Includes: two (2) center pads, two (2) outer support pads, bolts, nuts, lock washers.

$38.90/set
Ships in 3-4 Days
Air ventilator seal

p/n: 20-2964-31

Seal, air duct ventilator connector. Two (2) required per car.

$38.00/ea.
In Stock
Fabric hood lacing

p/n: 20-0354-42

Lacing, hood cowl. Forty nine (49) inches long. Cloth anti-squeak material where hood rests on cowl. Includes tacks.

$38.00/ea.
In Stock
Steering column gasket

p/n: 70-2317-88

Insulator, steering column lower mounting frame gasket. Triangular shape with mounting holes and column tube clearance.

$37.90/ea.
In Stock
Vent division bar weatherstrip

p/n: 20-0562-56

Front vent window division post seal. This part fits opposite the glass run channel and seals the vent window when the vent is closed.

$37.60/pr.
In Stock
Front coil spring pad

p/n: 40-0457-32

Front coil spring pad

$37.50/pr.
In Stock
Trunk Weatherstrip

p/n: 20-1389-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.

$37.50/ea.
In Stock
License lens gasket

p/n: 70-2121-17

Gasket, rear bumper license plate lens. Machine die-cut from 1/16" rubber.Length: 6.5625 inches. Width: 1.625 inches.

$37.40/ea.
Made to Order Takes 2-3 Days
Firewall grommet

p/n: 70-0967-20

Grommet, used for windshield washer, vacuum lines, antenna lead, and others through firewall.

$36.50/ea.
In Stock
Headliner Seal

p/n: 20-0573-88

Headliner Seal - One hundred seventy six (176) inches long to hold Headliner - Goes Around The Interior Perimeter Of Cab.

$36.50/ea.
In Stock
Windshield post to door seal

p/n: 70-0304-73

Weatherstrip, windshield post, upper to door. Seals between front door vent window frame and windshield pillar. Top quality rubber made to original cross-section. Two (2) strips approximately fifteen (15) inches long. May need to trim ends to fit.

$36.50/pr.
In Stock
Rigid run channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining, one half (1/2) inch deep by one half (1/2) inch wide, fifteen (15) inches long.

$36.10/pr.
In Stock
Hood bumper kit

p/n: 20-3003-42

Bumper kit, hood. Ten (10) piece set.

$36.00/set
In Stock
Splash apron

p/n: 20-3015-44

Deflectors, front fender splash apron and bottom of radiator side. Six (6) pieces per kit.

$36.00/set
Ships in 3-4 Days
Vent division bar weatherstrip

p/n: 20-3040-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$36.00/pr.
In Stock
Vent division bar weatherstrip

p/n: 20-3041-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$36.00/pr.
In Stock
Quarter window bumper

p/n: 70-1807-62

Bumper, quarter window at lock pillar.Width: 1.125 inches.

$35.30/pr.
In Stock
Accelerator Pedal

p/n: 60-0240-40

Accelerator pedal. Steel core with hinge. Length: 8.9375 inches.

$35.00/ea.
In Stock
Transmission Mount

p/n: 10-0142-25

Transmission Mount. Replaces factory #3154616, 3154617.

$35.00/ea.
In Stock
Taillight mounting pad

p/n: 60-0340-17

Pad, taillight retainer.Length: 4.625 inches.

$34.60/ea.
In Stock
Suspension arm bumper

p/n: 70-1021-32

Bumper, front or rear suspension, upper. Uses two (2) per car on front suspension, one (1) per car on rear.

$34.50/ea.
In Stock
Steering column finish strip

p/n: 70-1707-88

Seal, steering column to instrument panel. Extruded rubber strip thirteen (13) inch to exact cross-section.Length: 13.0 inches. Width: .625 inches.

$34.30/ea.
In Stock