Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

123 items found matching 1955 Cadillac Series 75 4 door Imperial Sedan
Glass Weatherstrip Kit

p/n: 90-3048-90

This kit includes the weatherstrip components needed for the glass on your restoration project.

Body Weatherstrip Kit

p/n: 90-3057-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

Side Window Run Channel Kit

p/n: 90-0141-58

This ten (10) piece kit includes the inner and outer windowfelts, upper and lower rigid run channels, and flexible run channels needed to complete two (2) doors.

Motor mount service

p/n: 70-0698-11

Cushion, motor support, front. Two (2) per car. Revulcanization service only.

Call or Email
Front Door Vent Window Set

p/n: 90-0427-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

Windshield Gasket

p/n: 50-0214-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

In Stock
Rear Window Gasket

p/n: 70-2323-81

This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.

In Stock
Harmonic balancer service

p/n: 70-1047-12

Engine harmonic balancer. Revulcanization service only. Send in your old, rebuildable balancer and pulley assembly.

Call or Email
Front Door Vent Window Weatherstrips

p/n: 38-0093-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

In Stock
Door weatherstrip

p/n: 70-0544-73

Weatherstrip, front door opening, auxiliary on cowl at beltline. Right and left, brass core.

In Stock
Taillight lens gasket kit

p/n: 70-0876-15

Gasket set, taillight lens and body mounting to fender. Steel rule die cut and molded rubber.

Made to Order Takes 4 Days
Cadillac Master Parts List 1948 - 1959 (Reprint)

p/n: 07-1442-07

This 1948-1959 Cadillac Master Parts List - Two (2) Volume set licensed Detroit Iron reprint provides the most comprehensive repair information in paper format. This OEM PARTS manual reproduction provides detailed original part numbers, part assembly diagrams / illustrations and part textual details for all vehicle subsystems. This information set is a high-quality reproduction of the exact parts manual originally published for use by Cadillac dealer mechanics.

Ships In 3-4 Days
Motor mount service

p/n: 70-0674-11

Cushion, motor support, rear on transmission to cross member. Revulcanization service only.

Call or Email
Motor mount service

p/n: 70-0629-11

Cushion support, motor, rear on transmission to cross member. Revulcanization service only. Similar to #70-0674-11.Length: 3.75 inches. Width: 2.25 inches.

Call or Email
Trunk Weatherstrip

p/n: 70-0896-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

In Stock
Air intake scoop mounting pad

p/n: 70-2022-31

Pad, air conditioning air intake (scoop) mounting.Length: 6.375 inches.

In Stock
Front spring bumper

p/n: 70-0172-32

Bumpers, front spring. Lower arm, original copy, integral molded plate and stud, three eighths (3/8) inch standard thread, for installing.

In Stock
Rigid Run Channel

p/n: 70-0536-58

Rigid, bright beaded edge, mohair lined channel, die trimmed and formed at top. Available in 29" pairs.

In Stock
Upper suspension arm dust seal

p/n: 70-0890-32

Seal, upper A-arm, inner and outer. Four (4) piece set.Height: 1.0 inches.

In Stock
Rear bumper seal

p/n: 70-1830-45

Seal, rear bumper to body. Includes two (2) thirty (30) inch strips of extrusion.Length: 30.0 inches. Width: 2.4375 inches.

In Stock
Fenderskirt edge seal

p/n: 70-0897-44

Seal, fender skirt edge.Length: 60.0 inches. Width: .625 inches.

In Stock
Axle rebound pad

p/n: 70-0210-32

Bottoming pads, rear axle. Rubber block mounts by bracket to rear axle tube.

In Stock
Stabilizer bushing

p/n: 70-0627-33

Bushings, stabilizer bar, front. Fully molded rubber. One and three fourths inch (1 3/4") length by one and one half inch (1 1/2") width by three fourths inch (3/4") inside hole diameter by one and five eighths inch (1 5/8") height.

In Stock
Fenderskirt Edge Seal

p/n: 70-0154-45

Seal, fenderskirt edge, exact copy, trim notch for skirt lock at installation. Compare sketch with your original to be sure. Two (2), five (5) foot strips.

In Stock
Headlight seal

p/n: 70-2574-14

Seal, headlight to front fender retainer seal. Fully molded to fit like original, unlike a extruded strip that will buckle.

In Stock
Hood To Cowl Weatherstrip

p/n: 70-0940-42

This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This seal mounts at the rear of the engine bay to seal between the hood and vehicle body cowl.

In Stock
Door weatherstrip

p/n: 70-0551-73

Weatherstrip, front door auxiliary, on door at beltline, right and left. Uses snap-in fasteners, four (4) each included.

In Stock
Front coil spring pad

p/n: 70-2302-35

Pad, front coil spring insulator cushion. Fully molded, mounts at top of front coil springs.

In Stock
1935-1974 Cadillac Factory Parts Manual, CD

p/n: 07-1346-07

This GM Licensed Detroit Iron CD provides the most comprehensive set of digital Cadillac Factory parts manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.

Body Anti-Squeak Rubber

p/n: 60-0054-73

Bulb type seal, gravel shield-to-rear bumper, anti-squeak. Also used as a door weatherstrip for some makes and models. Twelve (12) foot strip.

In Stock
Air conditioning pipe grommet

p/n: 70-0934-31

Grommet, air conditioning pipes to compressor and condenser. One (1) per car.Length: 4.375 inches. Width: 2.5 inches.

In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

In Stock
Front Stabilizer Bar End Link Kit

p/n: 70-2108-33

Kit, front stabilizer bar link assembly replacement. Twenty-two (22) piece set. Set for both sides of one car. Hex head bolt. 5/16"-24nf x 6-9/16" lg. Comes with metal sleeve, metal cup washers and rubber grommets.

In Stock
Flexible Run Channel

p/n: 70-1239-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

In Stock
Beltline Weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Bend to fit. Available in a 3ft pair.

In Stock
Headlight Door To Lens Seal

p/n: 70-0389-14

Headlight door to lens seal. Molded without wire. Single lip type for sealed beams.

In Stock
Steering column grommet

p/n: 70-0450-88

Grommet, steering column at floor, fits chrome ring.

In Stock
Vent division bar weatherstrip

p/n: 70-0868-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

Made to Order Takes 2-3 Days
Fog light lens gasket

p/n: 70-1033-17

Gasket, fog light lens.Length: 8.5 inches. Width: 4.125 inches. Height: .125 inches.

In Stock
Flexible Run Channel

p/n: 70-1238-58

Cloth covered, mohair lined flexible metal channel for sides and top of door windows.

In Stock
A-Arm Dust Shields Filler

p/n: 70-2772-45

This two (2) piece A-Arm Dust Shield Filler pair is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms only.

In Stock
Headlight Mounting Pad

p/n: 70-0201-14

Headlight body mounting gasket. Rubber.

In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

In Stock
Steering column gasket

p/n: 70-2317-88

Insulator, steering column lower mounting frame gasket. Triangular shape with mounting holes and column tube clearance.

In Stock
Firewall grommet

p/n: 70-0967-20

Grommet, used for windshield washer, vacuum lines, antenna lead, and others through firewall.

In Stock
Rigid Run Channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining. Available in 15" pairs.

In Stock
Suspension arm bumper

p/n: 70-1021-32

Bumper, front or rear suspension, upper. Uses two (2) per car on front suspension, one (1) per car on rear.

In Stock
Steering column finish strip

p/n: 70-1707-88

Seal, steering column to instrument panel. Extruded rubber strip thirteen (13) inch to exact cross-section.Length: 13.0 inches. Width: .625 inches.

In Stock
Firewall grommet

p/n: 70-1012-20

Grommet, parking brake cable through firewall.Length: 1.75 inches.

In Stock
Firewall grommet

p/n: 70-0984-20

Grommet, firewall wiring harness. Three and one eighth (3-1/8") long and two and one sixteenth (2-1/16") wide/Length: 3.125 inches. Width: 2.0625 inches.

In Stock