Please click on the part name in red in order to get a complete description.
Eight (8) piece set. Set includes run channel and beltline weatherstrip.
Door weatherstrip kit. This kit is the primary seal for the door to the body. Set includes the door bottom and perimeter seals that attach to the body and the door edge weatherstrip that attaches to the door.
This front door vent window weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit. The division post seals contain a brass core for durability and easy installation.
This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding.
Made from Standard material. Side window horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered. They come ready to install with finished ends and body curvature bends for a factory like appeara
Weatherstrip, interior door edge, black rubber only. (For door bottom, see our #60-0078-73). Two 10 foot strips, enough for two (2) doors.Length: 120.
Grommet, steering gear. Molded with metal core as original with all original features.Length: 4.375 inches.
Channel, rigid division bar. Un-beaded, cloth covered, mohair lined. Perfect replacement requires drilling for screws.
Bumper, axle to frame, rear.
Sixteen (16) piece body bumper kit.
This rear corner quarter window gasket set contains the quarter window gaskets and locking strips. All of the strips in this four (4) piece set come in forty-five inch (45") pieces and mount around the perimeters of the quarter windows on five window trucks. The ends may require trimming and bonding for installation.
Filler, runningboard-to-body, forty (40) inch long strip. For sixty four (64) inch strips see our #70-1117-45.
This rear window gasket weatherstrip set contains the rear window gasket itself and the locking strip. Both strips comes in a ninety inch (90") piece and mount around the full perimeter of the back glass. The ends may require trimming and bonding for installation.
Boot, parking brake lever at floor.
Cushion, overload spring bumper. Fully molded rubber part that installs in overload spring arm.
Pad. rear license light mounting. Two and three fourths (2-3/4) inch by three and nine thirty seconds (3-9/32) inch overall. Two (2) required per vehicle.
Headlight Door To Lens Seal - Molded without wire. Double lip type for sealed beam headlights. Note: Compare with our single lip type #70-0389-14 sold separately.
Weatherstrip, door window inner and outer, front and rear doors. Seven sixteenths (7/16) inch wide, with chrome bead, mohair faced, flexible. Two (2) three (3) foot strips. Bend to fit.
Inner Fender Seal for anti-rattle, runningboard apron to body, or fender splash panels. Nine sixteenths (9/16) inch by seven eighths (7/8) inch slotted sponge rubber to accept rivets. Sold in eight (8) foot strips.
Front vent window division post seal. Fully molded with metal core and attaching tabs. This part fits opposite the glass run channel and seals the vent window when the vent is closed. See Front door vent weatherstrip for main rubber seal.
Channel, flexible window run, un-beaded. Five eighths (5/8) inch wide, five (5) foot long. Cloth covered mohair-lined type. For sides and top of side windows. High quality, perfect copy. Applications with vent window use a five (5) ft. strip. Applications
Pad, accelerator pedal. Slipover cover type. Exact copy. Fits original steel core.Length: 8.0 inches.
Headlight body mounting gasket. Rubber.
Gasket, cowl vent. Labyrinth type as original.Length: 16.75 inches.
Grommet, main wiring harness through firewall. Fully molded with proper lips and pass through holes for electrical lines.
Pad, brake and clutch pedal.Length: 3.5 inches. Width: 2.5 inches.
Grommet, fuel filler neck (1955-2nd type). Fully molded rubber, slightly oblong. Three and one half inch (3 1/2") outside width by three and fiftteen sixteenths inch (3 15/16") outside length by two and one eighth inch (2 1/8") inside hole diameter by one
Weatherstrip, door bottom. Retained by metal strip, black only. Each strip approximately thirty two and one half (32-1/2) inches long.
Weatherstrip, door window at beltline, outer, (scraper type). Each strip approximately twenty six (26) inches to twenty seven (27) inches long.
Grommet, fuel filler neck. Oblong shaped molded rubber with retaining flange. Three and three fourths inch (3 3/4") outside length by three and five eighths inch (3 5/8") outside width. Two and thirteen sixteenths inch (2 3/16") inside hole width by two
Starter button, push on replacement to rod. Two (2) inch outside diameter.
Seal, vertical, front quarter panel (fender) to cab at rear of fender (cowl). Two (2) piece set for both sides of cab.Length: 36.0 inches. Width: .
Boot, brake master cylinder rod. Fits on one and one fourth (1-1/4) inch diameter cylinder. Height: 2.125 inches.
Pad, brake and clutch pedal. Length: 3.75 inches. Width: 2.375 inches.
Bumper, brake or clutch pedal to floorboard. Longer type with one and three eighths (1-3/8) inch clearance for pedal shaft.Length: 2.75 inches.
Weatherstrip, lower door. Heavy type with original ribbing and retainer lip.
Hood bumper set. Kit includes two (2) each of our #33-0123-42 bumpers and six (6) each of our #33-0459-42 bumpers.
Grommet, firewall, throttle rod and tube, oil pressure gauge pipe, heat indicator tube and choke rod. One and seven sixteenths (1-7/16) inch outside diameter.
Hood bumper set. Kit includes two (2) each of our #33-0046-42 bumpers, two (2) each of our #70-0294-42 bumpers, and six (6) each of our #33-0427-42 bumpers.
Cover, starter pedal button. Rubber slip over type for old metal. Two (2) inch outside diameter. If car doesn't have old metal, see our #60-0322-21.
Hose, cowl vent drain.Length: 7.25 inches.
Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.
Grommet, wiring harness through firewall, for one and one fourth (1-1/4) inch hole in sheet metal.Height: .75 inches.
Boot, solenoid plunger, starter switch at starter.Height: 1.625 inches.
Gasket, parking light lens and backup light lens. Die cut from one eighth (1/8) inch rubber.
Bushing, for shock absorber link cross pin or stabilizer link cross pin.1931-36 Bushing, rubber, for shock absorber link cross pin, #41151.
Bushing, gearshift shaft lever, larger type. Three eighths (3/8) inch inside diameter by nine sixteenths (9/16) inch outside diameter barrel.Height: .
Seal, steering column at toe pan, sponge.Length: 5.375 inches. Height: .25 inches.
Grommet, electric wire into light body under fenders, for headlights, taillights, some parking lights and auxiliary (fog) lights. Fits seven eighths (7/8) inch hole in light body. Two (2) to eight (8) per car as required.
Bushing, rear spring, shackle eye and spring eye. Up to twelve (12) per car.CV/GMC TRK 1955-57 Bushing, rubber, rear spring, shackle eye and spring eye.
Gasket, taillight to fender. Two 1/4" strips of sponge rubber cut 26-3/4" long. One (1) pair required per car.
Bushing, body shackles.Length: 1.125 inches.
Bumper, hood side upper. Fully molded, authentic configuration for 1/4" hole. Six (6) typically required per vehicle. Note: This part is included in our 90-0213-90 Body Bumper
Bushing, shock absorber arm link.
Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.
Washer, front and rear spring shackle, seal for shackle pin. Constructed of neoprene.
Weatherstrip, door edge, constant section on some models. Five eighths (5/8) inch by (5/8) inch cross-section, high grade, fine grain sponge rubber.
Grommet, shock absorber mounting, plain cylinder type with flat ends.
Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.
Front engine mount large cushion. Four (4) needed per truck. Height: 0.875 inches.
Door edge weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Excellent for use in many different applications and on many different vehicle models.
Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on
Retainer clip for flexible run channel. For sides and top of side window. Tempered spring steel.Length: 1.3125 inches. Width: .5625 inches.
Clip, end of door window run channel. Tempered spring steel. Length: 1.8125 inches. Width: .50 inches.
Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin
Bushing, shock absorber mounting. Five eighths (5/8) inch hole, one and one fourth (1-1/4) inch outside diameter, five eighths (5/8) inch thick.
Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition
Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.
Grommet, utility. Sheet Metal Hole: 3/4" Center Hole: 1/4" Outside Diameter: 15/16" Slot Width: 1/16"
Bushing, shock absorber mounting. Double cone style, rear. Five eighths (5/8) inch hole, one and one sixteenths (1-3/16) inch outside diameter, three fourth (3/4) inch thick.
Bumper, hood rest, cap type for adjustable screw, fifteenth sixteenths (15/16) inch, seven sixteenths (7/16) inch thick.
Grommet, parking brake release rod. Sheet Metal Hole: 7/16" Center Hole: 1/4" Outside Diameter: 3/4" Slot Width: 1/16"
Bumper, hood to cowl and door hinge pillar upper. May be used in both places.
Bumper, hood front in grille.
Bumper, hood panel to fender.
Pad, hood rest, front, to radiator header bar (top of grille).
Bushing, for double acting shock absorber arm link. Height: .78125 inches.
Bumper, door or license frame to trunk.