Search Results

117 items found matching 1956 Cadillac Series 62 4 door Sedan
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Glass Weatherstrip Kit

p/n: 90-3050-90

This kit includes the weatherstrip components needed for the glass on your restoration project.

$1,253.80/set
$1,128.40/set
10% discount
Kit
Body Weatherstrip Kit

p/n: 90-3057-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

$736.20/set
$662.60/set
10% discount
Kit
Side window run channel kit

p/n: 90-0141-58

This ten (10) piece kit includes the inner and outer windowfelts, upper and lower rigid run channels, and flexible run channels needed to complete two (2) doors. Used for front or rear doors in models with vent windows in the door.

$272.20/set
$245.00/set
10% discount
Kit
Quarter vent weatherstrip

p/n: 38-0094-76

Weatherstrip, quarter window vent.

$214.70/pr.
In Stock
Motor mount service

p/n: 70-0698-11

Cushion, motor support, front. Two (2) per car. Revulcanization service only.

$203.60/pr.
Call or Email
Front Door Vent Window Kit

p/n: 90-0427-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$207.70/set
$197.30/set
5% discount
Kit
Windshield Gasket

p/n: 50-0214-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

$195.50/ea.
In Stock
Rear Door weatherstrip

p/n: 70-0810-72

Door edge weatherstrip. This part is the primary door to body weatherstrip. Includes four (4) fasteners.

$180.40/set
In Stock
Rear Window Gasket

p/n: 70-0596-81

This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.

$171.90/ea.
In Stock
Harmonic balancer service

p/n: 70-1047-12

Engine harmonic balancer. Revulcanization service only. Send in your old, rebuildable balancer and pulley assembly.

$170.70/ea.
Call or Email
Front Door Vent Window Weatherstrips

p/n: 38-0093-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$161.40/pr.
In Stock
Door weatherstrip

p/n: 70-0544-73

Weatherstrip, front door opening, auxiliary on cowl at beltline. Right and left, brass core.

$160.60/pr.
In Stock
Taillight lens gasket kit

p/n: 70-0876-15

Gasket set, taillight lens and body mounting to fender. Steel rule die cut and molded rubber.

$159.70/set
In Stock
Front door weatherstrip

p/n: 70-0809-72

Front door edge weatherstrip. Glue in type. Includes 12 clips. This part is the primary door to body weatherstrip.

$154.60/set
In Stock
Door weatherstrip

p/n: 60-0247-72

Door edge weatherstrip, with pins. This part is the primary door to body weatherstrip. For Cadillac models, these are for the FRONT doors ONLY. For Chevrolet and Pontiac models, these are for the REAR doors ONLY.

$128.60/pr.
In Stock
Motor mount service

p/n: 70-0629-11

Cushion support, motor, rear on transmission to cross member. Revulcanization service only. Similar to #70-0674-11.Length: 3.75 inches. Width: 2.25 inches.

$126.30/ea.
Call or Email
Motor mount service

p/n: 70-0674-11

Cushion, motor support, rear on transmission to cross member. Revulcanization service only.

$126.30/ea.
Call or Email
Gas Filler Neck Seal Kit

p/n: 70-3763-39

This two (2) piece kit includes the gas tank filler neck upper and lower collar seals. These seals prevent gas fumes from entering the cabin. The upper seal fits on top of the fuel neck and seals against the back side of the fender behind the taillight. The collar seals the neck where it goes through rear fender splash panel on the trunk floor.

$139.40/set
$125.46/set
10% discount
Kit
Trunk Weatherstrip

p/n: 70-0896-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$118.20/ea.
In Stock
Air intake scoop mounting pad

p/n: 70-2022-31

Pad, air conditioning air intake (scoop) mounting.Length: 6.375 inches.

$107.20/pr.
In Stock
Rigid run channel

p/n: 70-0536-58

Run channel, front door window, for full length of division bar (approximately twenty nine (29) inches). Rigid, bright beaded edge, mohair lined channel, die trimmed and formed at top.

$85.50/pr.
In Stock
Gas Tank Filler Upper Seal

p/n: 70-3701-39

This Gas Tank Filler Upper Seal fits on top of the fuel neck and seals against the back side of the fender behind the taillight. A premium part fully molded with high quality EPDM rubber.

$85.40/ea.
In Stock
Upper suspension arm dust seal

p/n: 70-0890-32

Seal, upper A-arm, inner and outer. Four (4) piece set.Height: 1.0 inches.

$85.30/set
In Stock
Fenderskirt edge seal

p/n: 70-0897-44

Seal, fender skirt edge.Length: 60.0 inches. Width: .625 inches.

$76.70/pr.
In Stock
Axle rebound pad

p/n: 70-0210-32

Bottoming pads, rear axle. Rubber block mounts by bracket to rear axle tube.

$70.40/pr.
In Stock
Stabilizer bushing

p/n: 70-0627-33

Bushings, stabilizer bar, front. Fully molded rubber. One and three fourths inch (1 3/4") length by one and one half inch (1 1/2") width by three fourths inch (3/4") inside hole diameter by one and five eighths inch (1 5/8") height.

$70.10/pr.
In Stock
Steering column grommet

p/n: 70-1509-88

Grommet, steering column at floor.

$69.10/ea.
In Stock
Steering column floorplate

p/n: 70-1425-88

Seal, steering column to firewall. For 1956 vehicles purchase our #70-1509-88 grommet separately. For 1957-58 vehicles purchase our #70-2316-88 grommet separately.

$68.80/ea.
In Stock
Fenderskirt Edge Seal

p/n: 70-0154-45

Seal, fenderskirt edge, exact copy, trim notch for skirt lock at installation. Compare sketch with your original to be sure. Two (2), five (5) foot strips.

$67.90/pr.
In Stock
Rear bumper filler

p/n: 70-3078-30

Filler, rear bumper to body. Die cut masticated rubber.

$65.10/ea.
In Stock
Hood To Cowl Weatherstrip

p/n: 70-0940-42

Weatherstrip, hood to cowl. An exact reproduction of the original profile. This seal mounts at the rear of the engine bay directly to the body.

$62.40/set
In Stock
Door weatherstrip

p/n: 70-0551-73

Weatherstrip, front door auxiliary, on door at beltline, right and left. Uses snap-in fasteners, four (4) each included.

$60.00/set
In Stock
Front coil spring pad

p/n: 70-2302-35

Pad, front coil spring insulator cushion. Fully molded, mounts at top of front coil springs.

$56.90/pr.
In Stock
Body Anti-Squeak Rubber

p/n: 60-0054-73

Bulb type seal, gravel shield-to-rear bumper, anti-squeak. Also used as a door weatherstrip for some makes and models. Twelve (12) foot strip.

$55.20/ea.
In Stock
Fuel Filler Neck Lower Cover Collar Seal

p/n: 70-3700-39

This Fuel Filler Neck Lower Cover seals the neck where it goes through rear fender splash panel on the trunk floor. Part is fully molded rubber with a corrosion resistant brass core.

$54.00/ea.
In Stock
Air conditioning pipe grommet

p/n: 70-0934-31

Grommet, air conditioning pipes to compressor and condenser. One (1) per car.Length: 4.375 inches. Width: 2.5 inches.

$53.90/ea.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Channel, rigid run, window division bar. Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar.

$52.10/pr.
In Stock
Front Stabilizer Bar End Link Kit

p/n: 70-2108-33

Kit, front stabilizer bar link assembly replacement. Twenty-two (22) piece set. Set for both sides of one car. Hex head bolt. 5/16"-24nf x 6-9/16" lg. Comes with metal sleeve, metal cup washers and rubber grommets.

$49.00/pr.
In Stock
Flexible Run Channel 6 Foot

p/n: 70-1239-58

Window run channel with stainless beaded edge. Six (6) foot length. Cloth covered, mohair lined, flexible channel for sides and top of door windows. Exact replacement for listed vehicles but can be used in many applications.

$48.20/ea.
In Stock
Beltline weatherstrip

p/n: 70-0555-58

Weatherstrip, door window inner and outer, front and rear doors. Seven sixteenths (7/16) inch wide, with chrome bead, mohair faced, flexible. Two (2) three (3) foot strips. Bend to fit.

$47.70/pr.
In Stock
Headlight Door To Lens Seal

p/n: 70-0389-14

Headlight door to lens seal. Molded without wire. Single lip type for sealed beams.

$46.40/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-0868-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$46.30/pr.
In Stock
Parking light lens gasket

p/n: 70-1081-16

Gasket, fog and parking light lens housing.Length: 8.5 inches. Width: 4.0 inches.

$44.70/pr.
In Stock
Flexible Run Channel 5 Foot

p/n: 70-1238-58

Window run channel, stainless beaded edge. Cloth covered, mohair lined flexible metal channel for sides and top of door windows. Perfect dimensions, Five eighths (5/8) inch wide by nine sixteenths (9/16) inch overall height, exact replacement. Five (5) fo

$44.30/ea.
In Stock
Splash apron

p/n: 70-2772-45

Filler, splash apron. Die cut masticated rubber to authentic original dimensions. Includes all factory style holes required for installation.

$41.50/pr.
In Stock
Headlight Mounting Pad

p/n: 70-0201-14

Headlight body mounting gasket. Rubber.

$41.10/pr.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$39.10/ea.
In Stock
Firewall grommet

p/n: 70-0967-20

Grommet, used for windshield washer, vacuum lines, antenna lead, and others through firewall.

$36.50/ea.
In Stock
Rigid run channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining, one half (1/2) inch deep by one half (1/2) inch wide, fifteen (15) inches long.

$36.10/pr.
In Stock
Suspension arm bumper

p/n: 70-1021-32

Bumper, front or rear suspension, upper. Uses two (2) per car on front suspension, one (1) per car on rear.

$34.50/ea.
In Stock
Steering column finish strip

p/n: 70-1031-88

Seal, steering column to instrument panel. Extruded rubber twelve (12) inch strip to exact cross-section.Length: 10.5 inches. Width: .50 inches.

$34.30/ea.
In Stock
Firewall grommet

p/n: 70-1012-20

Grommet, parking brake cable through firewall.Length: 1.75 inches.

$33.30/ea.
In Stock
Firewall grommet

p/n: 70-0984-20

Grommet, firewall wiring harness. Three and one eighth (3-1/8") long and two and one sixteenth (2-1/16") wide/Length: 3.125 inches. Width: 2.0625 inches.

$31.40/ea.
In Stock
Firewall grommet

p/n: 70-1013-20

Grommet, speedometer cable through firewall.

$30.70/ea.
In Stock
Door handle gasket kit

p/n: 50-0494-69

Gasket, door handle.

$28.70/set
In Stock
Lower suspension arm dust seal

p/n: 70-0646-32

Seal, lower suspension arm, inner. Four (4) piece set.

$28.30/set
In Stock
Gas filler dust shield

p/n: 70-3773-41

Dust shield, gas filler. Die cut masticated rubber to authentic original dimensions.

$23.80/ea.
In Stock
Rear bumper end fillers

p/n: 70-3774-30

Seals, rear bumper end filler. Die cut masticated rubber to authentic original dimensions.

$23.80/pr.
In Stock
Rear spring pad

p/n: 70-0980-32

Pad, rear spring insulator. Two and one half (2-1/2) inches wide, with cloth reinforcement. Used upper and lower on spring. Four (4) used per car.

$22.70/ea.
In Stock
Metal sleeved grommet

p/n: 70-0203-41

Flanged rubber grommet with metal sleeve bushing. Used as part of the accelerator relay lever. Also used from 1959-61 on all Cadillac models as a bushing for the windshield wiper relay lever adaptor.

$22.40/ea.
In Stock
Body Mount Isolator Pad

p/n: 70-0929-48

Body Mount Isolator Pad - Rubber with metal core and locating collar as original part. Part dimensions = Two and three sixteenths inch (2 3/16") square by one inch (1") overall height with thirteen sixteenths inch (13/16") inside bolt diameter. Does not include any fastener hardware.

$21.50/ea.
In Stock
Trunk bumper

p/n: 70-0296-87

T-nut, trunk bumper in gutter at sides, brass core tapped 10-32 thread. Two (2) required per car. For models having partial weatherstrip in gutter of body.

$21.50/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Firewall grommet

p/n: 70-1040-20

Grommet, air conditioning Freon lines to chassis. Up to six (6) required per car.Length: 1.75 inches. Width: .84375 inches.

$15.50/ea.
In Stock
Window stop stem bumper

p/n: 33-0675-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required. (See sketch and our #33-0540-62).

$15.10/pr.
In Stock
Solenoid plunger boot

p/n: 60-0567-21

Boot, solenoid plunger, starter switch at starter.Height: 1.625 inches.

$14.90/ea.
In Stock
Glovebox door check grommet

p/n: 70-0968-88

Grommet, glove box door cushion. One and three quarters long (1-3/4") and thirteen sixteenths (13/16")wide.Length: 1.75 inches. Width: .8125 inches.

$14.00/ea.
In Stock
Lower suspension arm dust seal

p/n: 70-0624-32

Dust seal, "O" ring. Lower suspension arm pin bushing. Four (4) required per car.Height: .25 inches.

$13.20/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Body Mounting Pad

p/n: 50-0361-48

Pad, body mounting. Required replacement for body-off restorations. Constructed of high quality rubber for long lasting durability. Two inch (2") square by fifteen sixteenths inch (15/16) inside hole diameter by one fourth inch (1/4") height.

$10.80/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Body mounting pad

p/n: 70-2233-48

Pad, body mounting to chassis. Fully molded rubber. One and seven eighths inch (1 7/8") outside diameter by eleven sixteenths inch (11/16") inside hole diameter by nine sixteenths inch (9/16") height.

$10.70/ea.
In Stock
Body mounting pad

p/n: 70-2232-48

Pad, body mounting to chassis. Fully molded rubber. One and seven eighths inch (1 7/8") outside diameter by fifteen sixteenths inch (15/16") inside hole diameter by nine sixteenths inch (9/16") height.

$10.70/ea.
In Stock
Body mounting pad

p/n: 70-2234-48

Pad, body mounting to chassis. Fully molded rubber, square type. Six (6) or more are used per car. Two and three sixteenths inch (2 3/16") square by three fourths inch (3/4") inside diameter hole by one half inch (1/2") inch height.

$10.50/ea.
In Stock
Hood bumper

p/n: 70-0494-42

Bumper, hood side to fender. Four (4) per car.

$9.50/ea.
In Stock
Window stop stem bumper

p/n: 33-0622-62

Bumper, window stop. One and one fourth (1-1/4) inch square by one half (1/2) inch thick. Compare with our #33-0540-62 and #33-0675-62.Length: 1.

$9.50/ea.
In Stock
Hood bumper

p/n: 70-0935-42

Bumper assembly, seven eighths (7/8) inch diameter by three eighths (3/8) inch bumper on 1/4-20 stud.Height: 1.50 inches.

$9.40/ea.
In Stock
Instrument panel grommet

p/n: 70-1654-88

Grommet, instrument panel to windshield frame. Two (2) to six (6) required.Length: 1.3125 inches. Width: 1.0625 inches.

$9.20/ea.
In Stock
Spark plug wire spacer

p/n: 70-0394-21

Spacers, spark plug wires in organizer bracket.

$8.90/ea.
In Stock
Rear spring bushing

p/n: 70-0549-35

Bushing, spring and shackle, rear.

$7.90/ea.
In Stock
Window stop stem bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$7.90/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$7.80/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0650-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$7.80/ft.
In Stock
Door bumper

p/n: 34-0131-37

Bumper, front door above the upper hinge on the upper radius of the door. Stiff-backed, retained by screw, mounted on door only.

$7.40/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.40/ft.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.00/ea.
In Stock
Run channel mohair liner

p/n: 70-2863-58

Liner, mohair. Liner with a rubber backing. Apply with adhesive to division bars and channels. Helps reline guide bars on lock side of hardtops and convertibles.

$6.39/ft.
In Stock
Lock cylinder gasket

p/n: 70-0955-86

Gasket, trunk lock cylinder. Steel rule die cut from one thirty seconds (1/32) inch dense rubber.Length: 1.75 inches. Width: 1.25 inches. Height: .

$5.90/ea.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$5.70/ea.
In Stock
Door drain hole seal

p/n: 60-0442-70

Weatherstrip, door bottom drain hole seal. Also used on tailgate of station wagon. (Two (2) required for this use).Length: 4.0 inches.

$5.60/ea.
In Stock
Stabilizer or shock grommet

p/n: 70-0737-33

Grommet, front stabilizer link or shock absorber. Fully molded rubber. One and one eighths inch (1 1/8") by three eighths inch (3/8") inside hole diameter by seven eighths inch (7/8") height. Use as a front stablizer link for 1946-1970 Cadillac: All mode

$5.60/ea.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1111-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.50/ft.
In Stock
Hood to cowl bumper

p/n: 70-1248-42

Bumper, hood to cowl, intermediate. Attaches to our hood to cowl weatherstrips, .34 inch high. Use as required four (4) to six (6) per car. For .

$5.30/ea.
In Stock
Hood to cowl bumper

p/n: 70-1247-42

Bumper, hood to cowl, intermediate. Attaches to our hood to cowl weatherstrips, .28 inch high. Use as required four (4) to six (6) per car. For .

$5.00/ea.
In Stock
Hood to cowl bumper

p/n: 70-1249-42

Bumper, hood to cowl, intermediate. Attaches to our hood to cowl weatherstrips. Use as required, four (4) to six (6) per car. For .

$4.70/ea.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Firewall retainer

p/n: 60-0586-20

Retainer, firewall insulation panel. "Christmas Tree" style popular during this time. Constructed of vinyl plastic. Up to ten (10) required per car.

$4.60/ea.
In Stock
Door lock bumper

p/n: 34-0484-71

Bumper, door lock post, upper, one half (1/2) inch diameter by one half (1/2) inch tall, plated screw.Height: .50 inches.

$4.30/ea.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock