Please click on the part name in red in order to get a complete description.
Kit, complete window anti-rattler.
This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.
These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.
Door edge weatherstrip. This part is the primary door to body weatherstrip.
This rear window gasket set contains the gaskets that mount around the two (2) back windows on the barn doors. They have vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Kit, front spring shackle. Used on both springs. Includes: (4) 21C-5348-A bushings; (2) 21C-5344-A bushings (6) 21C-5465 pins.
Seals, panel rear door. Exactly as original with special molded corners. Includes twelve (12) screws.
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding.
This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Assembly, complete division bar. Right-side only. Ready to install. Comes complete with brackets and back of vent window seal.
Assembly, complete division bar. Left-side only. Ready to install. Comes complete with brackets and back of vent window seal.
Channel, door glass run. Stainless beaded edge. Includes clips pre-installed. Enough for one door only.
Made from Original style material. Side window horizontal seal (also known as beltline weatherstrip). These strips wipe the side windows when the glass is lowered. They come ready to install with finished ends and body curvature bends for a factory like a
Mount, upper motor. One (1) required per truck. 1953-56: F100-F350 239 & 272 V8 and 1953-56: F100 & F250 215 & 223 6 cylinder.
Channel, door glass sash. Either right or left.
Seal, bottom of cab to runningboard.Height: 2.0 inches.
Grommet, gas tank neck. Oval shaped. Fully molded rubber with retaining flange. Three and thirteen sixteenth inch (3 13/16") outside width by four and five sixteenths inch (4 5/16") outside length. One and one half inch (1 1/2") inside hole width by two i
Kit, radiator support to frame pad. Eighteen (18) piece set. Includes: two (2) center pads, two (2) outer support pads, six (6) washers, four (4) bolts, and four (4) nuts.
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Lacing, hood cowl. Forty nine (49) inches long. Cloth anti-squeak material where hood rests on cowl. Includes tacks.
Headliner Seal - One hundred seventy six (176) inches long to hold Headliner - Goes Around The Interior Perimeter Of Cab.
Kit, drag link end repair. Kit includes: 1-3336, 1-3326, 1-3327, 2-3320, 1-3328. Two (2) kits required per drag link.
Grommet, gas tank neck. Exactly as original.
Kit, cab to frame pad and bushing. Ten (10) piece set.
Pads, brake and clutch pedal. Concentric circle design.
Seal, back to front fender to cowl.
Cover, tailgate chain rubber. Cover only. Chain NOT included.
Fender welting. Eight (8) foot length.
Lacing, hood cowl.
Seal, battery hole cover to floor.
Insulator, transmission gear shift column lever.
Insulator, gear shift.
Set, spring clamp liner. Front spring takes eight pieces for both sides Rear spring takes four pieces for both sides. Six (6) piece set.
Gasket, cowl vent.
Bumper set, hood.
Repair kit, gear shift lever grommet. Column shift only. Two (2) kits required.
Bumper, front axle. Fully molded with retaining bolt. Typically order two (2) per truck.
Kit, bed to frame pad. Set of eight (8) pads.
Seal, hood front to top of radiator.
Bushing, spring shackle. Four (4) required.
Gaskets, taillight housing to body.
Pad, front of cab to frame. Lower. Fully molded rubber with locating collar. One and five eighths inch (1 5/8") outside diameter by three fourths inch (3/4") locating collar outside diameter by one half inch (1/2") locating collar inside hole diameter. On
Seal, steering column, brake and clutch arms to floor. Floor shift models.
Seal, steering column, brake and clutch arms to floor. Column shift models. Installs under metal plate.
Knob, gear shift lever.
Pad, fear of cab to frame suspension arm.
Seal, speedometer to dash.
Clips, roof headliner and seal retainer. Set of sixteen (16) pieces.
Grommet, fuel filler neck. This grommet fits the fuel filler neck. C1TZ-9080-A
Seal, outside door handle button.
Pads, outside door handle. Four (4) piece set.
Pad, front of cab to frame. Upper.
Knob, gear shift lever. Used on column shift models. Sphere shape.
Seal, lower radiator grille splash pan to radiator. Twenty three and one half (23-1/2) inches long.
Bumpers, tailgate chain. Fits in bracket.
Gaskets, taillight lens to housing. Shield type.
Cover, drag link. Two (2) required per truck.
Gaskets, parking light lens.
Gasket, headlight bucket to fender. Cork.
Front vent window division post seal. Extruded rubber strip only that will have to be attached to division post.
Outside Door Handle Mounting Pad - Designed from an original part so it fits correctly.
Grommet, speedometer cable housing firewall.Ford Truck 1956 Grommet, gas line through floor pan. Ford Truck 1957-60 Grommet, speedometer cable.
Bumpers, brake and clutch pedal arm.
Bumpers, side of tailgate to bed. Installs in tailgate.
Gaskets, taillight lens. Cork.Ford Truck 1948-56 Gaskets, lens to housing. Ford Cars 1941 Gaskets, taillight lens.
Gasket, license plate light lens. Shield type.
Grommet, mirror arm to door.
Bumpers, glovebox and/or fuel filler door. Used as glove box door bumpers for all models listed, used as fuel door bumper for 1950-51 cars and 57-59 retractables only.
Seal, steering column to bracket anti-squeak.
Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one seven eighths (1-7/8) inch in diameter.
Bushings, rear of cab to frame suspension arm. Set of four (4) pieces.
Shield, battery splash.
Plug, door mirror bracket hole. Used when not installing mirror.
Grommet, hood pull cable firewall.
Gasket, license plate light lens to housing.
Clip, roof headliner and seal retainer. Sixteen (16) clips required.