Search Results

696 items found matching 1957
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Trunk Weatherstrip

p/n: 70-0510-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$5.90/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$5.70/ea.
In Stock
Control arm bushing seal

p/n: 60-0094-32

Seal, upper and lower control arm cross shaft bushing, at inner end of arm.1939-48: Lower only, all pass. (exc.

$5.60/ea.
In Stock
Door drain hole seal

p/n: 60-0442-70

Weatherstrip, door bottom drain hole seal. Also used on tailgate of station wagon. (Two (2) required for this use).Length: 4.0 inches.

$5.60/ea.
In Stock
Hood to cowl weatherstrip

p/n: 20-1866-45

Pads, top rear of front to cowl.

$5.60/pr.
Ships in 3-4 Days
License lens gasket

p/n: 20-0614-17

Gasket, license plate light lens. Shield type.

$5.60/ea.
Ships in 3-4 Days
Rear view mirror mounting pad

p/n: 20-0692-45

Grommet, mirror arm to door.

$5.60/ea.
In Stock
Spring shackle seal

p/n: 70-1125-33

Washer, front and rear spring shackle, seal for shackle pin. Constructed of neoprene.

$5.60/ea.
In Stock
Stabilizer or shock grommet

p/n: 70-0737-33

Grommet, front stabilizer link or shock absorber. Fully molded rubber. One and one eighths inch (1 1/8") by three eighths inch (3/8") inside hole diameter by seven eighths inch (7/8") height. Use as a front stablizer link for 1946-1970 Cadillac: All mode

$5.60/ea.
In Stock
Trunk bumper

p/n: 20-1923-67

Bumpers, package tray panel. Glues on bottom of trunk lid door where front of package tray panel contacts bottom of trunk lid.

$5.60/pr.
Ships in 3-4 Days
Trunk torsion bar anti-rattle

p/n: 20-1394-87

Anti-rattler, trunk torsion bar.

$5.60/ea.
Ships in 3-4 Days
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1111-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.50/ft.
In Stock
Glovebox and fuel door bumper

p/n: 20-1220-88

Bumpers, glovebox and/or fuel filler door. Used as glove box door bumpers for all models listed, used as fuel door bumper for 1950-51 cars and 57-59 retractables only.

$5.40/pr.
In Stock
Door weatherstrip

p/n: 70-0219-73

Weatherstrip, door edge, constant section on some models. Five eighths (5/8) inch by (5/8) inch cross-section, high grade, fine grain sponge rubber.

$5.30/ft.
In Stock
Hood to cowl bumper

p/n: 70-1248-42

Bumper, hood to cowl, intermediate. Attaches to our hood to cowl weatherstrips, .34 inch high. Use as required four (4) to six (6) per car. For .

$5.30/ea.
In Stock
Shock absorber grommet

p/n: 60-0235-33

Grommet, shock absorber mounting, plain cylinder type with flat ends.

$5.30/ea.
In Stock
Suspension bushing

p/n: 20-2485-36

Seal, idler arm. Two (2) required per car.

$5.30/ea.
Ships in 3-4 Days
Hood bumper

p/n: 70-1607-42

Bumper, hood. Use as required.Width: .6875 inches. Height: .625 inches.

$5.10/ea.
In Stock
Engine Mount Cushion

p/n: 60-0231-11

Front engine mount small cushion. Four (4) needed per truck. Height: 0.84375 inches.

$5.00/ea.
In Stock
Engine Mount Cushion

p/n: 60-0232-11

Front engine mount large cushion. Four (4) needed per truck. Height: 0.875 inches.

$5.00/ea.
In Stock
Hood to cowl bumper

p/n: 70-1247-42

Bumper, hood to cowl, intermediate. Attaches to our hood to cowl weatherstrips, .28 inch high. Use as required four (4) to six (6) per car. For .

$5.00/ea.
In Stock
Steering column floorplate

p/n: 20-0587-36

Seal, steering column to bracket anti-squeak.

$5.00/ea.
Ships in 3-4 Days
Utility Plug

p/n: 35-0099-20

Plug, utility, various uses.

$5.00/ea.
In Stock
Wiring grommet

p/n: 20-1801-17

Grommet, license plate light wire. Installs where wire comes in rear bottom of trunk.

$5.00/ea.
In Stock
Body Hole Plug

p/n: 20-1041-21

Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one seven eighths (1-7/8) inch in diameter.

$4.80/ea.
In Stock
Fuel line grommet

p/n: 20-1720-41

Grommet, fuel tank vent pipe to body.

$4.80/ea.
Ships in 3-4 Days
Antenna hole plug

p/n: 35-0327-45

Plug, antenna mounting for inner front fender at shroud. For vehicles without fender-mounted antenna.

$4.70/ea.
In Stock
Firewall grommet

p/n: 35-0515-20

Grommet, floor pan, rear compartment and body.

$4.70/ea.
In Stock
Hood to cowl bumper

p/n: 70-1249-42

Bumper, hood to cowl, intermediate. Attaches to our hood to cowl weatherstrips. Use as required, four (4) to six (6) per car. For .

$4.70/ea.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Firewall retainer

p/n: 60-0586-20

Retainer, firewall insulation panel. "Christmas Tree" style popular during this time. Constructed of vinyl plastic. Up to ten (10) required per car.

$4.60/ea.
In Stock
Power top cylinder spacer

p/n: 70-0822-67

Spacer, folding top power cylinder support. Four (4) used per car.

$4.60/ea.
In Stock
Accelerator rod seal

p/n: 20-1303-41

Seal, accelerator pedal rod to floor.

$4.40/ea.
Ships in 3-4 Days
Access hole plug

p/n: 20-1813-20

Plug, access hole in cowl top.

$4.40/ea.
Ships in 3-4 Days
Brake and clutch pedal bumper

p/n: 20-1051-24

Bumper, brake and clutch pedal arm.

$4.40/ea.
In Stock
Radiator mounting pad

p/n: 20-1873-48

Pads, radiator support to frame. One upper & one lower. Two (2) required per car.

$4.40/pr.
Ships in 3-4 Days
Standard bumper

p/n: 20-0001-88

Bumpers, ashtray door or glove box door.

$4.40/pr.
In Stock
Door lock bumper

p/n: 34-0484-71

Bumper, door lock post, upper, one half (1/2) inch diameter by one half (1/2) inch tall, plated screw.Height: .50 inches.

$4.30/ea.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Door or tailgate bumper

p/n: 33-1228-71

Bumper pads, door or tailgate. Twin retainer style. Three eighths (3/8) inch by seven eighths (7/8) inch by one half (1/2) inch high.

$4.20/ea.
In Stock
Filler and cushion strip

p/n: 70-1237-48

Filler and cushion strip, many applications. Five thirty seconds (5/32) inch by one and five eighths (1-5/8) inch.

$4.20/ft.
In Stock
Front fender center pad

p/n: 20-1865-45

Pads, back center of front fender. Mounts where fender bolts to cowl.

$4.20/pr.
In Stock
License lens gasket

p/n: 20-2925-17

Gasket, license plate light lens.

$4.20/set
Ships in 3-4 Days
Shock absorber bushing

p/n: 70-0541-33

Bushing, shock absorber mounting. Five eighths (5/8) inch hole, one and one fourth (1-1/4) inch outside diameter, five eighths (5/8) inch thick.

$4.10/ea.
In Stock
Filler and cushion strip

p/n: 70-1236-48

Filler and cushion strip, many applications. One sixteenth (1/16) inch by one and three eighths (1-3/8) inch.

$4.00/ft.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Firewall grommet

p/n: 32-0263-17

Grommet, license light wire through body. Sheet Metal Hole: 3/4" Center Hole: 5/16" Outside Diameter: 1" Slot Width: 1/16"

$3.90/ea.
In Stock
Firewall grommet

p/n: 32-0162-21

Grommet, utility. Sheet Metal Hole: 3/4" Center Hole: 1/4" Outside Diameter: 15/16" Slot Width: 1/16"

$3.90/ea.
In Stock
Front fender bumper

p/n: 33-0531-42

Bumper, front fender to hood.

$3.90/ea.
In Stock
Door bumper

p/n: 33-1227-71

Bumper, door edge, twin retainer style, three eighths (3/8) inch wide by seven eighths (7/8) inch long by three eighths (3/8) inch high.

$3.50/ea.
In Stock
Shock absorber bushing

p/n: 70-0547-32

Bushing, shock absorber mounting. Double cone style, rear. Five eighths (5/8) inch hole, one and one sixteenths (1-3/16) inch outside diameter, three fourth (3/4) inch thick.

$3.50/ea.
In Stock
Side window lift limit cap

p/n: 60-0071-62

Caps, side window lift limit. Rubber, snap-over type, three fourths (3/4) inch diameter by five sixteenths (5/16) inch thick.

$3.50/ea.
In Stock
Firewall Grommet

p/n: 35-0369-20

Grommet, shroud or cowl upper panel gauge holes and for various body holes requiring grommet.

$3.40/ea.
In Stock
Door plug

p/n: 20-0429-45

Plug, door mirror bracket hole. Used when not installing mirror.

$3.30/ea.
In Stock
Gearshift bushing

p/n: 32-0051-24

Insulator (bushing). Gearshift selector rod. Sheet Metal Hole: 9/16" Center Hole: 3/8" Outside Diameter: 5/8" Slot Width: 5/32"

$3.30/ea.
In Stock
Glovebox link bumper

p/n: 20-1399-88

Stop, glovebox arm.Ford Truck 1957-64 Stop, glovebox arm. Requires 2 each. Ford Cars 1955-68 Bumper, glovebox door check arm stop.

$3.30/ea.
In Stock
Hood bumper

p/n: 20-1309-42

Bumper, hood pull cam. Two (2) required per car.Ford Cars 1957-60 Bumper, hood pull cam. 2 required per car. Ford Cars 1958-59 Bumper, trunk lid.

$3.30/ea.
In Stock
Rear view mirror gasket

p/n: 20-3020-45

Gasket, outside mirror. Paper.

$3.30/ea.
In Stock
Shock absorber bushing

p/n: 20-1274-32

Bushing, shock absorber link. May be used for front or rear spring.Chrysler 1951-54 Bushing, rubber, shock absorber link.

$3.30/ea.
In Stock
Body Hole Plug

p/n: 20-1040-21

Plug, hole in dog leg cover. Installs at front of door where bolt to adjust vent window frame is located. This body plug covers a sheet metal hole that is one and one half (1-1/2) inch in diameter.

$3.20/ea.
In Stock
Body Hole Plug

p/n: 20-1039-21

Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one fourth (1-1/4) inch in diameter.

$3.20/ea.
In Stock
Fuel line grommet

p/n: 20-0679-41

Grommet, gas line through floor pan.

$3.20/ea.
Ships in 3-4 Days
Trunk floor pan plug

p/n: 35-0070-87

Plug, trunk and floor pan drain hole. Buick 1950-65 Plug, trunk and floor pan drain hole.

$3.20/ea.
In Stock
Door weatherstrip fastener

p/n: 60-0260-73

Clip, retainer for door edge weatherstrip. Two (2) prong type with oval screw hole, spring steel, cadmium plated.Width: .875 inches. Height: .9375 inches.

$3.10/ea.
In Stock
Hydraulic pump mounting pad

p/n: 70-0946-67

Mounting pad, folding top hydraulic pump mount. Special design to hold pump mounting bracket to floor pan. Four (4) needed per car.Height: 1.0 inches.

$3.10/ea.
In Stock
Wiring grommet

p/n: 32-0970-17

Grommet, license light wire. Sheet Metal Hole: 5/8" Center Hole: 7/32" Outside Diameter: 13/16" Slot Width: 3/32"

$3.10/ea.
In Stock
Hood bumper

p/n: 70-0294-42

Bumper, hood rest, cap type for adjustable screw, fifteenth sixteenths (15/16) inch, seven sixteenths (7/16) inch thick.

$3.00/ea.
In Stock
Vent window bumper

p/n: 33-0507-62

Pad, vent window frame, self-retaining.

$3.00/ea.
In Stock
Wiring grommet

p/n: 32-0366-53

Grommet, windshield wiper control cable or gas gauge wire through rear compartment pan. Sheet Metal Hole: 7/16" Center Hole: 1/8" Outside Diameter: 5/8" Slot Width: 1/16"

$3.00/ea.
In Stock
Hood & Door bumper

p/n: 33-0459-42

Bumper, hood to cowl and door hinge pillar upper. May be used in both places.

$2.90/ea.
In Stock
Body hole plug

p/n: 20-1038-21

Plug, cowl and floor pan. Three fourths (3/4) inch.

$2.80/ea.
In Stock
Standard bumper

p/n: 20-1852-41

Bumper, fuel tank filler lid. Gray rubber.Ford Cars 1960-63 Bumper, license plate rubber. Used on rear bumper. 2 required per car.

$2.80/ea.
Ships in 3-4 Days
Trunk bumper

p/n: 33-0293-87

Bumper, trunk and tailgate lid bumper support, on lid.

$2.80/ea.
In Stock
Brake adjustment hole plug

p/n: 70-1092-24

Plug, brake adjustment hole. Fits five sixteenths (5/16) inch by one (1) inch slot. Most models with drum brakes.Length: 1.25 inches. Height: .875 inches.

$2.60/ea.
In Stock
Hood bumper

p/n: 33-0427-42

Bumper, hood panel to fender.

$2.60/ea.
In Stock
Hood bumper

p/n: 33-0046-42

Bumper, hood front in grille.

$2.60/ea.
In Stock
Standard bumper

p/n: 33-0496-71

Bumper, used at door opening at upper corner, license plate, and/or fuel filler door. Self-retaining type.

$2.60/ea.
In Stock
Door Bumper

p/n: 33-1234-71

Bumper, door side. One half (1/2) inch block height. Two (2) or four (4) used per car.

$2.50/ea.
In Stock
Door weatherstrip fastener

p/n: 50-0198-73

Fastener, door edge weatherstrip, steel. One half (1/2) inch long, thirteen thirty second (13/32) inch diameter head, black finish.

$2.50/ea.
In Stock
Standard bumper

p/n: 33-0136-42

Bumper, standard. See detail page for specific usage.

$2.50/ea.
In Stock
Clutch rod seal

p/n: 20-1825-23

Seal, clutch pedal rod to firewall.

$2.40/ea.
Ships in 3-4 Days
Firewall grommet

p/n: 20-1561-20

Grommet, choke and throttle rod or hood pull cable firewall.1932-47: All Trucks for choke & throttle rod; 1957-63: All Trucks for choke & wiper.

$2.40/ea.
In Stock
Firewall grommet

p/n: 20-1815-20

Grommet, heater motor wire.

$2.40/ea.
Ships in 3-4 Days
Firewall grommet

p/n: 20-1814-20

Grommet, hood pull cable.

$2.40/ea.
Ships in 3-4 Days
Hood weatherstrip clip

p/n: 70-0564-42

Fastener, hood to cowl weatherstrip (and other uses), self-retaining steel button, eleven sixteenths (11/16) inch head, for five sixteenths (5/16) inch hole but will fit down to one fourth (1/4) inch hole.

$2.40/ea.
Ships in 1-2 Weeks
Sun visor end plug

p/n: 20-1219-88

Tip, sun visor arm boot. Used where sun visor hooks to clip in center. Two (2) required per car.

$2.40/ea.
In Stock
Lock cylinder gasket

p/n: 60-0641-69

Gasket, door or trunk lock cylinder. Exact reproduction

$2.10/ea.
In Stock
Side window bumper

p/n: 33-0516-71

Bumper, anti-rattle. Door window garnish molding, stem type retainer. Five sixteenths (5/16) inch diameter. Two (2) per door.

$1.70/ea.
In Stock
Glovebox and Fuel Filler Door Bumper

p/n: 33-0127-41

Glovebox and Fuel Filler Door Bumper

$1.30/ea.
In Stock
License plate bumper

p/n: 33-0349-87

Bumper, license plate on trunk lid.

$1.00/ea.
In Stock
Standard Bumper

p/n: 33-0128-88

Standard Bumper - Commonly used for fuel filler or glovebox doors.

$1.00/ea.
In Stock
License plate bumper

p/n: 60-0734-71

Bumper, door or license frame to trunk.

$0.90/ea.
In Stock
Trunk emblem mounting pad

p/n: 20-1969-87

Pad, deck lid plastic emblem.

$0.90/ea.
Ships in 3-4 Days
Firewall grommet

p/n: 32-0158-17

Grommet, hand brake cable through firewall. Sheet Metal Hole: 9/16" Center Hole: 5/16" Outside Diameter: 13/16" Slot Width: 1/16"

$0.70/ea.
In Stock