Search Results
Please click on the part name in red in order to get a complete description.
Retractable roof rail kit
p/n: 20-1915-65
Retractable roof rail weatherstrip. This part fits on the folding roof of the vehicle and seals the side window when the window is fully raised.
Side window run channel kit
p/n: 20-1904-60
Kit, complete door glass run and window-felt. Enough for both doors. Includes front and rear rigid run channel, inner and outer windowfelts and vent window division post seals.
Front Door Vent Window Kit
p/n: 90-0314-90
This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.
Stabilizer bar assembly kit
p/n: 20-1842-33
Bushing and bracket kit, front stabilizer bar. Twenty-six (26) piece set. Includes: four (4) rubber bushings, two (2) metal inner brackets, two (2) outer metal brackets, six (6) bolts, six (6) washers and six (6) nuts.
Front Door Vent Window Weatherstrips
p/n: 20-1888-55
These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.
Rear Window Gasket
p/n: 20-1956-81
This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.
Front Door weatherstrip
p/n: 20-1947-72
Door edge weatherstrip. This part is the primary door to body weatherstrip.
Front bow weatherstrip
p/n: 20-1924-67
Seal, top of windshield to front of top flapper. NOTE: This is the main seal, second from the front.
Retractable Roof Front Side Weatherstrip
p/n: 20-1925-67
Weatherstripping, front roof side assembly. Cloth covered like original. Goes on side of flapper.
Windshield Gasket
p/n: 20-1874-50
This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding.
Trunk Front Edge Weatherstrip
p/n: 20-1966-85
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts to the front edge of the trunk directly to the body.
Beltline weatherstrip
p/n: 20-1902-60
Window-felt kit, door glass. Right side only. Kit contains one (1) outer piece for door and one (1) inner piece for garnish molding.
Beltline weatherstrip
p/n: 20-1903-60
Window-felt kit, door glass. Left side only. Kit contains one (1) outer piece for door and one (1) inner piece for garnish molding.
Gravel shield anti-squeak
p/n: 20-1869-47
Deflector, rear stone. Rubber. Installs between body and rear bumper. Includes fasteners.
Retractable roof weatherstrip
p/n: 20-1927-67
Weatherstripping, rear roof side. Glues on top of rear quarter.
Beltline weatherstrip
p/n: 40-0539-57
Window felt inner and/or outer. One (1) pair of three (3) foot lengths. Flexible, pile lined, rubber covered, with black bead. For front door, rear door and quarter windows.
Side window leading edge
p/n: 20-1951-80
Side window vertical leading edge weatherstrip. This part attaches to the vertical edge of the rear side windows when the rear side windows are fully raised. This part does not include the chrome piece that attaches directly to the glass.
U Jamb lock pillar filler
p/n: 20-1952-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
Beltline weatherstrip
p/n: 70-0555-58
Weatherstrip, door window inner and outer, front and rear doors. Seven sixteenths (7/16) inch wide, with chrome bead, mohair faced, flexible. Two (2) three (3) foot strips. Bend to fit.
Peel-N-Stick Trunk Weatherstrip
p/n: 20-1389-WT
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.
Fuel neck grommet
p/n: 20-1848-39
Grommet, fuel neck. Soft flexible rubber with retaining flange. Five and one eighth inch (5 1/8") outside diameter by three and three fourths inch (3 3/4") sheet metal/retaining flange diameter by two inch (2") inside hole width by two and seven sixteenth
Retractable roof weatherstrip
p/n: 20-1922-67
Seals, body to rear side of top. Glues to top of quarter where sides of top set on body when top is up.
Rigid run channel
p/n: 20-1895-58
Channel, door glass run. Lock side. Rear of front door. Your original brackets attach to this.
Side window weatherstrip
p/n: 30-0244-57
Window felt inner and/or outer. One (1) pair of three (3) foot lengths. Flexible, pile lined, rubber covered, with black bead. For front door, rear door and quarter windows.
U Jamb lock pillar filler
p/n: 20-3124-79
Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.
Vent division bar weatherstrip
p/n: 20-1893-56
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Spring shackle bushing kit
p/n: 20-1836-32
Shackle kit, front of rear spring. Kit completes one spring.
Trunk Weatherstrip
p/n: 20-1389-84
This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk lid.
Hinge Pillar Weatherstrip
p/n: 20-1912-63
Convertible Hinge Pillar Weatherstrip - Attaches to the body and seals between the A-pillar post and the front section of the door or vent window frame when the door is closed.
Fender Skirt Edge Seal
p/n: 20-1862-44
This Fender Skirt Edge Seal pair is designed from the original part for superior fitment and seal. For original skirts only this seal fits between fender skirt and rear fender body.
Spring shackle bushing kit
p/n: 20-1834-32
Bolt and bushing kit, rear of rear spring shackle. Enough for one (1) side only.
Retractable roof weatherstrip
p/n: 20-1921-67
Pads, flapper. (Front of top rests on when top is down.) Glues to top of wheel well.
Spring shackle bushing kit
p/n: 20-1272-32
Set, spring clamp liner. Front spring takes eight pieces for both sides Rear spring takes four pieces for both sides. Six (6) piece set.
Steering column floorplate
p/n: 20-1694-88
Seal, steering column tube. Installs on top of floor mat.
Splash apron
p/n: 20-1864-45
Seal, front fender splash apron to fender anti-squeak. Seventy two (72) inch strip.
Steering column floorplate
p/n: 20-1782-88
Seal, steering column to floor. Installs under floor mat.
Front suspension bumper
p/n: 20-0034-32
Bumper, front suspension upper arm. Three eighths (3/8) inch by three fourths (3/4) inch bolt, twenty four (24) threads.
Retractable roof weatherstrip
p/n: 20-1926-67
Weatherstripping, rear roof front. This is the seal between front part of rear top and flapper.
Window pinchweld seal
p/n: 20-1882-52
Seal, garnish molding to dash rubber. Eighty four (84) inches long. Replaces factory #B7A-7003127-E.
Door Handle Gasket Set
p/n: 20-1936-69
Pads or gaskets for the outside door handles. Front or rear, this is a four (4) piece set.
Sash channel weatherstrip
p/n: 20-1909-62
Weatherstrip, sash channel. Thirty one and one half (31-1/2) inch long rubber piece that goes between glass and sash channel.
Window pinchweld seal
p/n: 20-1881-52
Seal, garnish molding to dash rubber. Forty six (46) inches long. Models WITH A/C. Replaces factory #B7A-7003127-B.
Axle rebound pad
p/n: 20-1287-32
Bumper, rear spring and axle. 1957-59: Full size Fords: Five (5) required per car (1 in center, 2 each side).
Door bumper
p/n: 20-0004-71
Bumpers, door. Five eighths (5/8) inch high. Installs on door jamb where rear of door closes against body and on rear lower part of door.
Trunk bumper
p/n: 20-1923-67
Bumpers, package tray panel. Glues on bottom of trunk lid door where front of package tray panel contacts bottom of trunk lid.
Glovebox and fuel door bumper
p/n: 20-1220-88
Bumpers, glovebox and/or fuel filler door. Used as glove box door bumpers for all models listed, used as fuel door bumper for 1950-51 cars and 57-59 retractables only.
Wiring grommet
p/n: 20-1801-17
Grommet, license plate light wire. Installs where wire comes in rear bottom of trunk.
Body Hole Plug
p/n: 20-1041-21
Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one seven eighths (1-7/8) inch in diameter.
Radiator mounting pad
p/n: 20-1873-48
Pads, radiator support to frame. One upper & one lower. Two (2) required per car.
Front fender center pad
p/n: 20-1865-45
Pads, back center of front fender. Mounts where fender bolts to cowl.
Glovebox link bumper
p/n: 20-1399-88
Stop, glovebox arm.Ford Truck 1957-64 Stop, glovebox arm. Requires 2 each. Ford Cars 1955-68 Bumper, glovebox door check arm stop.
Hood bumper
p/n: 20-1309-42
Bumper, hood pull cam. Two (2) required per car.Ford Cars 1957-60 Bumper, hood pull cam. 2 required per car. Ford Cars 1958-59 Bumper, trunk lid.
