Search Results

114 items found matching 1958 Cadillac Series 62 4 door Hardtop
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Body Weatherstrip Kit

p/n: 90-3060-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

$951.40/set
$856.30/set
10% discount
Kit
Front Door weatherstrip

p/n: 70-0805-72

Door edge weatherstrip with molded ends. This part is the primary door to body weatherstrip. Includes clips and pins for easy installation.

$268.20/set
In Stock
Bumper guard cap

p/n: 70-0883-30

Caps, front bumper guard. Rubber with molded in plate and bolt. A high quality reproduction. Four and seven eighths inch (4-7/8") outside diameter.

$240.90/pr.
In Stock
Front Door Vent Window Kit

p/n: 90-0422-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$252.30/set
$239.70/set
5% discount
Kit
Rear Window Gasket

p/n: 70-0760-81

This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.

$236.30/ea.
In Stock
Rear door weatherstrip

p/n: 70-0571-72

Door edge weatherstrip with molded ends, rear doors. This part is the primary door to body weatherstrip. Includes clips and pins for easy installation.

$215.90/set
In Stock
Rear door vent weatherstrip

p/n: 38-0088-74

Weatherstrip, rear door vent window. Order our #70-0783-74 division post weatherstrip separately.

$208.50/pr.
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0087-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$206.20/pr.
In Stock
Hardtop roof rail weatherstrip

p/n: 70-0534-68

Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.

$190.90/pr.
In Stock
Windshield Gasket

p/n: 70-0762-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.

$190.90/ea.
In Stock
Motor mount service

p/n: 70-0674-11

Cushion, motor support, rear on transmission to cross member. Revulcanization service only.

$126.30/ea.
Call or Email
Splash apron

p/n: 70-2493-45

Filler, splash apron. Die cut masticated rubber to authentic original dimensions. Includes all factory style holes required for installation.

$91.70/set
In Stock
Rigid run channel

p/n: 70-0536-58

Run channel, front door window, for full length of division bar (approximately twenty nine (29) inches). Rigid, bright beaded edge, mohair lined channel, die trimmed and formed at top.

$85.50/pr.
In Stock
Upper suspension arm dust seal

p/n: 70-0890-32

Seal, upper A-arm, inner and outer. Four (4) piece set.Height: 1.0 inches.

$85.30/set
In Stock
Rear door hinge pillar weatherstrip

p/n: 70-1655-70

Weatherstrip, rear door hinge pillar.Length: 2.75 inches.

$73.00/pr.
In Stock
Prop shaft retainer bushing

p/n: 70-1889-27

Bushing set for prop shaft retainer.

$71.50/set
In Stock
Stabilizer bushing

p/n: 70-0627-33

Bushings, stabilizer bar, front. Fully molded rubber. One and three fourths inch (1 3/4") length by one and one half inch (1 1/2") width by three fourths inch (3/4") inside hole diameter by one and five eighths inch (1 5/8") height.

$70.10/pr.
In Stock
Steering column floorplate

p/n: 70-1425-88

Seal, steering column to firewall. For 1956 vehicles purchase our #70-1509-88 grommet separately. For 1957-58 vehicles purchase our #70-2316-88 grommet separately.

$68.80/ea.
In Stock
Fenderskirt Edge Seal

p/n: 70-0154-45

Seal, fenderskirt edge, exact copy, trim notch for skirt lock at installation. Compare sketch with your original to be sure. Two (2), five (5) foot strips.

$67.90/pr.
In Stock
Hood To Cowl Weatherstrip

p/n: 70-0827-42

Weatherstrip, hood to cowl. An exact reproduction of the original profile. This seal mounts at the rear of the engine bay directly to the body.

$66.00/ea.
In Stock
Radiator support weatherstrip

p/n: 70-2780-45

Seal, radiator support kit. Die cut masticated rubber to authentic original dimensions. Includes all factory style holes required for installation.

$65.20/set
In Stock
Steering column grommet

p/n: 70-2316-88

Grommet, steering column at floor. Order our #70-2316-88 seal separately.

$65.10/ea.
In Stock
Axle rebound pad

p/n: 70-2225-32

Bumper, rear spring axle impact. Located on frame rail. Rubber only, does not include metal retaining clips or bolts.Width: 1.9375 inches. Height: 2.

$63.70/pr.
In Stock
Door weatherstrip

p/n: 70-0552-73

Weatherstrip, front door, auxiliary on body above beltline, hinge pillar windshield post. Two (2) strips, each thirteen and three eighths (13-3/8) inches long with retaining clips.

$60.20/pr.
In Stock
Door weatherstrip

p/n: 70-0551-73

Weatherstrip, front door auxiliary, on door at beltline, right and left. Uses snap-in fasteners, four (4) each included.

$60.00/set
In Stock
Front coil spring pad

p/n: 70-2302-35

Pad, front coil spring insulator cushion. Fully molded, mounts at top of front coil springs.

$56.90/pr.
In Stock
Front Stabilizer Bar End Link Kit

p/n: 70-2109-33

Kit, front stabilizer bar link assembly replacement. Twenty-two (22) piece set. One (1) set for both sides of one (1) car. Hex head bolt. 5/16"-24nf x 7- 5/8" lg. Comes with metal sleeve, metal cup washers and rubber grommets.

$55.50/pr.
In Stock
Body Anti-Squeak Rubber

p/n: 60-0054-73

Bulb type seal, gravel shield-to-rear bumper, anti-squeak. Also used as a door weatherstrip for some makes and models. Twelve (12) foot strip.

$55.20/ea.
In Stock
Vent division bar weatherstrip

p/n: 70-0783-74

Division bar seal. Made with metal core and attaching tabs like original. Rear door on models with rear door vent.

$54.20/pr.
In Stock
Rear Bumper Filler

p/n: 70-3079-30

Filler, rear bumper to body. Die cut masticated rubber.

$53.00/ea.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Channel, rigid run, window division bar. Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar.

$52.10/pr.
In Stock
Side window leading edge

p/n: 70-0904-80

Side window vertical leading edge weatherstrip.

$50.70/pr.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0773-WT

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$49.50/ea.
In Stock
Battery cable grommet

p/n: 70-2318-20

Grommet, battery cable through radiator shroud. Reproduction of original rectangular design exactly. Replaces #1469080. Length: 2.4375 inches. Width: 1.5 inches.

$48.80/ea.
In Stock
Rear bumper end filler set

p/n: 70-3769-30

Seal, rear bumper end. Die cut masticated rubber to authentic original dimensions.

$47.60/set
In Stock
Headlight seal

p/n: 70-1465-14

Seal, headlight outer rim to sealed beam retainer ring. Possible fit for models with dual headlights.Width: .375 inches. Height: .9375 inches.

$46.40/set
In Stock
Vent division bar weatherstrip

p/n: 70-0703-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$46.10/pr.
In Stock
Hood Bumper

p/n: 70-0501-42

Bumpers, hood. Four (4) per set.Length: 1.4375 inches. Width: .5625 inches.

$44.30/set
In Stock
Rear coil spring pad

p/n: 70-0945-32

Insulator, rear coil spring.

$41.90/pr.
In Stock
Window Sash / Beltline Channel

p/n: 70-0651-58

Weatherstrip, window sash channel (beltline), inner. Rigid, rubber covered weatherstrip with flock lining and one fourth (1/4) inch chrome edge. Used on front door, rear door and rear quarter window. Six (6) foot strip.

$40.50/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0773-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$39.50/ea.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$39.10/ea.
In Stock
Seals, rear wheelhouse

p/n: 70-2782-45

Seals, rear wheelhouse

$37.70/pr.
In Stock
Fan shroud assembly seal

p/n: 70-2779-45

Seal, fan shroud assembly. Die cut masticated rubber to authentic original dimensions. Includes all factory style holes required for installation.

$36.70/pr.
In Stock
Firewall grommet

p/n: 70-0967-20

Grommet, used for windshield washer, vacuum lines, antenna lead, and others through firewall.

$36.50/ea.
In Stock
Rigid run channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining, one half (1/2) inch deep by one half (1/2) inch wide, fifteen (15) inches long.

$36.10/pr.
In Stock
Suspension arm bumper

p/n: 70-1021-32

Bumper, front or rear suspension, upper. Uses two (2) per car on front suspension, one (1) per car on rear.

$34.50/ea.
In Stock
Firewall grommet

p/n: 70-1012-20

Grommet, parking brake cable through firewall.Length: 1.75 inches.

$33.30/ea.
In Stock
Firewall grommet

p/n: 70-1013-20

Grommet, speedometer cable through firewall.

$30.70/ea.
In Stock
Parking light lens gasket

p/n: 70-3092-16

Gasket, signal and parking light lens. Two (2) piece set.

$29.60/pr.
In Stock
Fuel filler dust shield

p/n: 70-2783-45

Seal, gas filler dust shield. Die cut masticated rubber to authentic original dimensions. Includes all factory style holes required for installation.

$28.30/ea.
In Stock
Inner fender seal

p/n: 70-2781-45

Seal, inner fender to bumper. Die cut masticated rubber to authentic original dimensions. Includes all factory style holes required for installation.

$28.30/pr.
In Stock
Lower suspension arm dust seal

p/n: 70-0646-32

Seal, lower suspension arm, inner. Four (4) piece set.

$28.30/set
In Stock
Wiring grommet

p/n: 70-0864-15

Grommet, taillight wiring through trunk inner panel. One (1) pair per car.

$26.00/pr.
In Stock
Metal sleeved grommet

p/n: 70-0203-41

Flanged rubber grommet with metal sleeve bushing. Used as part of the accelerator relay lever. Also used from 1959-61 on all Cadillac models as a bushing for the windshield wiper relay lever adaptor.

$22.40/ea.
In Stock
Antenna mount pad

p/n: 70-0996-19

Pad, antenna mount.

$22.00/ea.
In Stock
Body Mount Isolator Pad

p/n: 70-0929-48

Body Mount Isolator Pad - Rubber with metal core and locating collar as original part. Part dimensions = Two and three sixteenths inch (2 3/16") square by one inch (1") overall height with thirteen sixteenths inch (13/16") inside bolt diameter. Does not include any fastener hardware.

$21.50/ea.
In Stock
Trunk bumper

p/n: 70-0296-87

T-nut, trunk bumper in gutter at sides, brass core tapped 10-32 thread. Two (2) required per car. For models having partial weatherstrip in gutter of body.

$21.50/ea.
In Stock
Dome light lens gasket

p/n: 70-3102-17

Gasket, dome light lens.

$19.60/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Inner fender seal

p/n: 70-3080-45

Filler, front auxiliary wheel house to inner fender. Two (2) piece set. Die cut masticated rubber.

$16.40/pr.
In Stock
Window stop stem bumper

p/n: 33-0675-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required. (See sketch and our #33-0540-62).

$15.10/pr.
In Stock
Parking brake pedal pad

p/n: 70-1273-22

Pad, parking brake locking pedal.Length: 2.0625 inches. Width: 1.5 inches.

$14.40/ea.
In Stock
Glovebox door check grommet

p/n: 70-0968-88

Grommet, glove box door cushion. One and three quarters long (1-3/4") and thirteen sixteenths (13/16")wide.Length: 1.75 inches. Width: .8125 inches.

$14.00/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Body Mounting Pad

p/n: 50-0361-48

Pad, body mounting. Required replacement for body-off restorations. Constructed of high quality rubber for long lasting durability. Two inch (2") square by fifteen sixteenths inch (15/16) inside hole diameter by one fourth inch (1/4") height.

$10.80/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Body mounting pad

p/n: 70-2233-48

Pad, body mounting to chassis. Fully molded rubber. One and seven eighths inch (1 7/8") outside diameter by eleven sixteenths inch (11/16") inside hole diameter by nine sixteenths inch (9/16") height.

$10.70/ea.
In Stock
Body mounting pad

p/n: 70-2232-48

Pad, body mounting to chassis. Fully molded rubber. One and seven eighths inch (1 7/8") outside diameter by fifteen sixteenths inch (15/16") inside hole diameter by nine sixteenths inch (9/16") height.

$10.70/ea.
In Stock
Body mounting pad

p/n: 70-2234-48

Pad, body mounting to chassis. Fully molded rubber, square type. Six (6) or more are used per car. Two and three sixteenths inch (2 3/16") square by three fourths inch (3/4") inside diameter hole by one half inch (1/2") inch height.

$10.50/ea.
In Stock
Rear view mirror mounting pad

p/n: 70-3081-70

Gasket, rear view mirror to door.

$9.90/ea.
In Stock
Hood bumper

p/n: 70-0494-42

Bumper, hood side to fender. Four (4) per car.

$9.50/ea.
In Stock
Window stop stem bumper

p/n: 33-0622-62

Bumper, window stop. One and one fourth (1-1/4) inch square by one half (1/2) inch thick. Compare with our #33-0540-62 and #33-0675-62.Length: 1.

$9.50/ea.
In Stock
Hood bumper

p/n: 70-0935-42

Bumper assembly, seven eighths (7/8) inch diameter by three eighths (3/8) inch bumper on 1/4-20 stud.Height: 1.50 inches.

$9.40/ea.
In Stock
Instrument panel grommet

p/n: 70-1654-88

Grommet, instrument panel to windshield frame. Two (2) to six (6) required.Length: 1.3125 inches. Width: 1.0625 inches.

$9.20/ea.
In Stock
Headlight dimmer switch pad

p/n: 70-0930-14

Pad, headlight dimmer switch. Rubber slip-over cover for floor mounted switch.

$8.90/ea.
In Stock
Spark plug wire spacer

p/n: 70-0394-21

Spacers, spark plug wires in organizer bracket.

$8.90/ea.
In Stock
Window stop stem bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$7.90/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$7.80/ea.
In Stock
Door bumper

p/n: 34-0131-37

Bumper, front door above the upper hinge on the upper radius of the door. Stiff-backed, retained by screw, mounted on door only.

$7.40/ea.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.00/ea.
In Stock
Parking brake pedal pad

p/n: 70-1274-22

Pad, parking brake release pedal.Length: 2.625 inches. Width: .8125 inches.

$6.80/ea.
In Stock
Run channel mohair liner

p/n: 70-2863-58

Liner, mohair. Liner with a rubber backing. Apply with adhesive to division bars and channels. Helps reline guide bars on lock side of hardtops and convertibles.

$6.39/ft.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0510-WT

Peel-N-Stick Trunk Weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of deck lid weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$6.20/ft.
In Stock
Trunk Weatherstrip

p/n: 70-0346-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$6.20/ft.
In Stock
Trunk Weatherstrip

p/n: 70-0510-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$5.90/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$5.70/ea.
In Stock
Door drain hole seal

p/n: 60-0442-70

Weatherstrip, door bottom drain hole seal. Also used on tailgate of station wagon. (Two (2) required for this use).Length: 4.0 inches.

$5.60/ea.
In Stock
Stabilizer or shock grommet

p/n: 70-0737-33

Grommet, front stabilizer link or shock absorber. Fully molded rubber. One and one eighths inch (1 1/8") by three eighths inch (3/8") inside hole diameter by seven eighths inch (7/8") height. Use as a front stablizer link for 1946-1970 Cadillac: All mode

$5.60/ea.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1111-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.50/ft.
In Stock
Hood to cowl bumper

p/n: 70-1248-42

Bumper, hood to cowl, intermediate. Attaches to our hood to cowl weatherstrips, .34 inch high. Use as required four (4) to six (6) per car. For .

$5.30/ea.
In Stock
Taillight gasket

p/n: 70-1051-15

Weatherstrip, taillight housing to fender.Length: 50.0 inches. Width: .3125 inches.

$5.30/ea.
In Stock
Hood to cowl bumper

p/n: 70-1247-42

Bumper, hood to cowl, intermediate. Attaches to our hood to cowl weatherstrips, .28 inch high. Use as required four (4) to six (6) per car. For .

$5.00/ea.
In Stock
Hood to cowl bumper

p/n: 70-1249-42

Bumper, hood to cowl, intermediate. Attaches to our hood to cowl weatherstrips. Use as required, four (4) to six (6) per car. For .

$4.70/ea.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Firewall retainer

p/n: 60-0586-20

Retainer, firewall insulation panel. "Christmas Tree" style popular during this time. Constructed of vinyl plastic. Up to ten (10) required per car.

$4.60/ea.
In Stock
Door lock bumper

p/n: 34-0484-71

Bumper, door lock post, upper, one half (1/2) inch diameter by one half (1/2) inch tall, plated screw.Height: .50 inches.

$4.30/ea.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Door or tailgate bumper

p/n: 33-1228-71

Bumper pads, door or tailgate. Twin retainer style. Three eighths (3/8) inch by seven eighths (7/8) inch by one half (1/2) inch high.

$4.20/ea.
In Stock