Search Results

78 items found matching 1958 Cadillac Series 86 0 door Chassis
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Bumper guard cap

p/n: 70-0883-30

Caps, front bumper guard. Rubber with molded in plate and bolt. A high quality reproduction. Four and seven eighths inch (4-7/8") outside diameter.

$245.79/pr.
In Stock
Splash apron

p/n: 70-2493-45

Filler, splash apron. Die cut masticated rubber to authentic original dimensions. Includes all factory style holes required for installation.

$95.49/set
In Stock
Rigid run channel

p/n: 70-0536-58

Run channel, front door window, for full length of division bar (approximately twenty nine (29) inches). Rigid, bright beaded edge, mohair lined channel, die trimmed and formed at top.

$88.99/pr.
In Stock
Upper suspension arm dust seal

p/n: 70-0890-32

Seal, upper A-arm, inner and outer. Four (4) piece set.Height: 1.0 inches.

$88.79/set
In Stock
Rear bumper seal

p/n: 70-1830-45

Seal, rear bumper to body. Includes two (2) thirty (30) inch strips of extrusion.Length: 30.0 inches. Width: 2.4375 inches.

$85.59/pr.
Made to Order Takes 3 Days
Prop shaft retainer bushing

p/n: 70-1889-27

Bushing set for prop shaft retainer.

$74.49/set
In Stock
Stabilizer bushing

p/n: 70-0627-33

Bushings, stabilizer bar, front. Fully molded rubber. One and three fourths inch (1 3/4") length by one and one half inch (1 1/2") width by three fourths inch (3/4") inside hole diameter by one and five eighths inch (1 5/8") height.

$72.99/pr.
In Stock
Fenderskirt Edge Seal

p/n: 70-0154-45

Seal, fenderskirt edge, exact copy, trim notch for skirt lock at installation. Compare sketch with your original to be sure. Two (2), five (5) foot strips.

$70.69/pr.
In Stock
Hood To Cowl Weatherstrip

p/n: 70-0827-42

This Hood to Cowl Weatherstrip is designed from the original part for superior fitment and seal. An exact reproduction of the original profile. This seal mounts at the rear of the engine bay to seal between the hood and vehicle body cowl.

$68.69/ea.
In Stock
Radiator support weatherstrip

p/n: 70-2780-45

Seal, radiator support kit. Die cut masticated rubber to authentic original dimensions. Includes all factory style holes required for installation.

$67.89/set
In Stock
Axle rebound pad

p/n: 70-2225-32

Bumper, rear spring axle impact. Located on frame rail. Rubber only, does not include metal retaining clips or bolts.Width: 1.9375 inches. Height: 2.

$66.29/pr.
In Stock
Door weatherstrip

p/n: 70-0552-73

Weatherstrip, front door, auxiliary on body above beltline, hinge pillar windshield post. Two (2) strips, each thirteen and three eighths (13-3/8) inches long with retaining clips.

$62.69/pr.
In Stock
Door weatherstrip

p/n: 70-0551-73

Weatherstrip, front door auxiliary, on door at beltline, right and left. Uses snap-in fasteners, four (4) each included.

$62.49/set
In Stock
Front coil spring pad

p/n: 70-2302-35

Pad, front coil spring insulator cushion. Fully molded, mounts at top of front coil springs.

$59.29/pr.
In Stock
1935-1974 Cadillac Factory Parts Manual, CD

p/n: 07-1346-07

This GM Licensed Detroit Iron CD provides the most comprehensive set of digital Cadillac Factory parts manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.

$58.29/ea.
Ships in 3-4 Days
1957-1958 Cadillac Factory Shop Manual, CD

p/n: 07-1057-07

This GM Licensed Detroit Iron CD provides the most comprehensive set of digital Cadillac Factory shop repair manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.

$58.29/ea.
Ships in 3-4 Days
Front Stabilizer Bar End Link Kit

p/n: 70-2109-33

Kit, front stabilizer bar link assembly replacement. Twenty-two (22) piece set. One (1) set for both sides of one (1) car. Hex head bolt. 5/16"-24nf x 7- 5/8" lg. Comes with metal sleeve, metal cup washers and rubber grommets.

$57.79/pr.
In Stock
Body Anti-Squeak Rubber

p/n: 60-0054-73

Bulb type seal, gravel shield-to-rear bumper, anti-squeak. Also used as a door weatherstrip for some makes and models. Twelve (12) foot strip.

$57.49/ea.
In Stock
Rigid Run Channel

p/n: 70-0347-58

Channel, rigid run, window division bar. Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar.

$54.29/pr.
In Stock
Window Sash / Beltline Channel

p/n: 70-0651-58

Weatherstrip, window sash channel (beltline), inner. Rigid, rubber covered weatherstrip with flock lining and one fourth (1/4) inch chrome edge. Used on front door, rear door and rear quarter window. Six (6) foot strip.

$53.79/ea.
In Stock
Battery cable grommet

p/n: 70-2318-20

Grommet, battery cable through radiator shroud. Reproduction of original rectangular design exactly. Replaces #1469080. Length: 2.4375 inches. Width: 1.5 inches.

$52.79/ea.
In Stock
Rear bumper end filler set

p/n: 70-3769-30

Seal, rear bumper end. Die cut masticated rubber to authentic original dimensions.

$51.49/set
In Stock
Headlight seal

p/n: 70-1465-14

Seal, headlight outer rim to sealed beam retainer ring. Possible fit for models with dual headlights.Width: .375 inches. Height: .9375 inches.

$50.19/set
In Stock
Hood Bumper

p/n: 70-0501-42

Bumpers, hood. Four (4) per set.Length: 1.4375 inches. Width: .5625 inches.

$47.89/set
In Stock
Rear Wheelhouse Seals

p/n: 70-2782-45

This Rear Wheelhouse Seal pair is die cut masticated rubber made to authentic original dimensions. Includes all factory style holes for installation.

$40.79/pr.
In Stock
Fan shroud assembly seal

p/n: 70-2779-45

Seal, fan shroud assembly. Die cut masticated rubber to authentic original dimensions. Includes all factory style holes required for installation.

$39.69/pr.
In Stock
Firewall grommet

p/n: 70-0967-20

Grommet, used for windshield washer, vacuum lines, antenna lead, and others through firewall.

$39.49/ea.
In Stock
Suspension arm bumper

p/n: 70-1021-32

Bumper, front or rear suspension, upper. Uses two (2) per car on front suspension, one (1) per car on rear.

$37.39/ea.
In Stock
Firewall grommet

p/n: 70-1012-20

Grommet, parking brake cable through firewall.Length: 1.75 inches.

$35.99/ea.
In Stock
Firewall grommet

p/n: 70-1013-20

Grommet, speedometer cable through firewall.

$33.29/ea.
In Stock
Parking light lens gasket

p/n: 70-3092-16

Gasket, signal and parking light lens. Two (2) piece set.

$31.99/pr.
In Stock
Fuel filler dust shield

p/n: 70-2783-45

Seal, gas filler dust shield. Die cut masticated rubber to authentic original dimensions. Includes all factory style holes required for installation.

$30.69/ea.
In Stock
Inner fender seal

p/n: 70-2781-45

Seal, inner fender to bumper. Die cut masticated rubber to authentic original dimensions. Includes all factory style holes required for installation.

$30.69/pr.
In Stock
Lower suspension arm dust seal

p/n: 70-0646-32

Seal, lower suspension arm, inner. Four (4) piece set.

$30.69/set
In Stock
Rear spring pad

p/n: 70-0980-32

Pad, rear spring insulator. Two and one half (2-1/2) inches wide, with cloth reinforcement. Used upper and lower on spring. Four (4) used per car.

$24.59/ea.
In Stock
Metal sleeved grommet

p/n: 70-0203-41

Flanged rubber grommet with metal sleeve bushing. Used as part of the accelerator relay lever. Also used from 1959-61 on all Cadillac models as a bushing for the windshield wiper relay lever adaptor.

$24.29/ea.
In Stock
Antenna Mount Pad

p/n: 70-0996-19

Pad, antenna mount.

$23.89/ea.
In Stock
Body Mount Isolator Pad

p/n: 70-0929-48

Body Mount Isolator Pad - Rubber with metal core and locating collar as original part. Part dimensions = Two and three sixteenths inch (2 3/16") square by one inch (1") overall height with thirteen sixteenths inch (13/16") inside bolt diameter. Does not include any fastener hardware.

$23.29/ea.
In Stock
Dome light lens gasket

p/n: 70-3102-17

Gasket, dome light lens.

$21.29/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$20.39/ea.
In Stock
Inner fender seal

p/n: 70-3080-45

Filler, front auxiliary wheel house to inner fender. Two (2) piece set. Die cut masticated rubber.

$17.79/pr.
In Stock
Parking brake pedal pad

p/n: 70-1273-22

Pad, parking brake locking pedal.Length: 2.0625 inches. Width: 1.5 inches.

$15.69/ea.
In Stock
Body Mounting Pad

p/n: 50-0361-48

Pad, body mounting. Required replacement for body-off restorations. Constructed of high quality rubber for long lasting durability. Two inch (2") square by fifteen sixteenths inch (15/16) inside hole diameter by one fourth inch (1/4") height.

$11.79/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$11.79/sqf
In Stock
Body Mount Isolator

p/n: 70-2232-48

Isolator, body mounting to chassis. Fully molded rubber. One and seven eighths inch (1 7/8") outside diameter by fifteen sixteenths inch (15/16") inside hole diameter by nine sixteenths inch (9/16") height.

$11.69/ea.
In Stock
Body mounting pad

p/n: 70-2233-48

Pad, body mounting to chassis. Fully molded rubber. One and seven eighths inch (1 7/8") outside diameter by eleven sixteenths inch (11/16") inside hole diameter by nine sixteenths inch (9/16") height.

$11.69/ea.
In Stock
Body mounting pad

p/n: 70-2234-48

Pad, body mounting to chassis. Fully molded rubber, square type. Six (6) or more are used per car. Two and three sixteenths inch (2 3/16") square by three fourths inch (3/4") inside diameter hole by one half inch (1/2") inch height.

$11.39/ea.
In Stock
Rear view mirror mounting pad

p/n: 70-3081-70

Gasket, rear view mirror to door.

$10.79/ea.
In Stock
Hood bumper

p/n: 70-0494-42

Bumper, hood side to fender. Four (4) per car.

$10.39/ea.
In Stock
Hood bumper

p/n: 70-0935-42

Bumper assembly, seven eighths (7/8) inch diameter by three eighths (3/8) inch bumper on 1/4-20 stud.Height: 1.50 inches.

$10.29/ea.
In Stock
Headlight dimmer switch pad

p/n: 70-0930-14

Pad, headlight dimmer switch. Rubber slip-over cover for floor mounted switch.

$9.69/ea.
In Stock
Rear spring bushing

p/n: 70-0549-35

Bushing, spring and shackle, rear.

$8.59/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$8.49/ea.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.69/ea.
In Stock
Parking brake pedal pad

p/n: 70-1274-22

Pad, parking brake release pedal.Length: 2.625 inches. Width: .8125 inches.

$7.39/ea.
In Stock
Run channel mohair liner

p/n: 70-2863-58

Liner, mohair. Liner with a rubber backing. Apply with adhesive to division bars and channels. Helps reline guide bars on lock side of hardtops and convertibles.

$6.99/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$6.39/ft.
In Stock
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$6.29/ea.
In Stock
Stabilizer or shock grommet

p/n: 70-0737-33

Grommet, front stabilizer link or shock absorber. Fully molded rubber. One and one eighths inch (1 1/8") by three eighths inch (3/8") inside hole diameter by seven eighths inch (7/8") height. Use as a front stablizer link for 1946-1970 Cadillac: All mode

$5.99/ea.
In Stock
Hood to cowl bumper

p/n: 70-1248-42

Bumper, hood to cowl, intermediate. Attaches to our hood to cowl weatherstrips, .34 inch high. Use as required four (4) to six (6) per car. For .

$5.79/ea.
In Stock
Hood to cowl bumper

p/n: 70-1247-42

Bumper, hood to cowl, intermediate. Attaches to our hood to cowl weatherstrips, .28 inch high. Use as required four (4) to six (6) per car. For .

$5.49/ea.
In Stock
Hood to cowl bumper

p/n: 70-1249-42

Bumper, hood to cowl, intermediate. Attaches to our hood to cowl weatherstrips. Use as required, four (4) to six (6) per car. For .

$5.19/ea.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$5.19/ft.
In Stock
Firewall retainer

p/n: 60-0586-20

Retainer, firewall insulation panel. "Christmas Tree" style popular during this time. Constructed of vinyl plastic. Up to ten (10) required per car.

$4.99/ea.
In Stock
Door lock bumper

p/n: 34-0484-71

Bumper, door lock post, upper, one half (1/2) inch diameter by one half (1/2) inch tall, plated screw.Height: .50 inches.

$4.69/ea.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.69/ft.
In Stock
Door or tailgate bumper

p/n: 33-1228-71

Bumper pads, door or tailgate. Twin retainer style. Three eighths (3/8) inch by seven eighths (7/8) inch by one half (1/2) inch high.

$4.59/ea.
In Stock
Filler and cushion strip

p/n: 70-1237-48

Filler and cushion strip, many applications. Five thirty seconds (5/32) inch by one and five eighths (1-5/8) inch.

$4.59/ft.
In Stock
Filler and cushion strip

p/n: 70-1236-48

Filler and cushion strip, many applications. One sixteenth (1/16) inch by one and three eighths (1-3/8) inch.

$4.39/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$4.39/ft.
In Stock
Sash Channel Filler, 1/32" Cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$4.39/ft.
In Stock
Front Fender Bumper

p/n: 33-0531-42

Bumper, front fender to hood.

$4.29/ea.
In Stock
Door bumper

p/n: 33-1227-71

Bumper, door edge, twin retainer style, three eighths (3/8) inch wide by seven eighths (7/8) inch long by three eighths (3/8) inch high.

$3.89/ea.
In Stock
Hood bumper

p/n: 70-0294-42

Bumper, hood rest, cap type for adjustable screw, fifteenth sixteenths (15/16) inch, seven sixteenths (7/16) inch thick.

$3.29/ea.
In Stock
Wiring grommet

p/n: 32-0366-53

Grommet, windshield wiper control cable or gas gauge wire through rear compartment pan. Sheet Metal Hole: 7/16" Center Hole: 1/8" Outside Diameter: 5/8" Slot Width: 1/16"

$3.29/ea.
In Stock
Door weatherstrip fastener

p/n: 50-0198-73

Fastener, door edge weatherstrip, steel. One half (1/2) inch long, thirteen thirty second (13/32) inch diameter head, black finish.

$2.79/ea.
In Stock
Fastener - Hood To Cowl Weatherstrip

p/n: 70-0564-42

A quality plastic button-head push-in fastener with self-retaining barbs. Typically used for hood to cowl weatherstrips, but also has other uses. The fastener length is three-fourths (3/4") inch with a five-eights (5/8") inch smooth button-head. Will fit a five-sixteenths (5/16') inch hole.

$2.69/ea.
In Stock
Lock cylinder gasket

p/n: 60-0641-69

Gasket, door or trunk lock cylinder. Exact reproduction

$2.39/ea.
In Stock