Please click on the part name in red in order to get a complete description.
This window felt and run channel weatherstrip kit is designed from original parts for superior fitment and seal. This is a complete six (6) piece side window "anti-rattler" kit that does both truck doors.
This rear window gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the back glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.
Door edge weatherstrip. This part is the primary door to body weatherstrip.
These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.
Kit, cab to frame pad and bolt.
Kit, front spring shackle. Both Front and Rear. Includes two (2) #APA-5631 and two (2) #B7C-5304-A.
This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation. It also has the slot to accommodate the outer edge's decorative molding.
This windshield gasket is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the front glass and has vulcanized, or bonded, ends which means no cutting or splicing is required for installation.
Assembly, complete division bar. Right-side only.
Assembly, complete division bar. Left-side only.
Original equipment style side window horizontal seal kit (also known as beltline weatherstrip). Kit includes inner and outer felt beltline weatherstrip for each door and quarter windows. These strips wipe the side windows when the glass is lowered. They c
Channel, door glass flexible run. Stainless Bead.
Pads, brake and clutch pedal.
Channel, door glass sash. Either right or left.
Kit, radiator support to frame pad and bolt. Six (6) piece set.
Cover, tailgate chain rubber. Cover only. Chain NOT included.
Bolt and bushing kit, rear of rear spring shackle. Enough for one (1) side only.
Bumper kit, hood.
Fender welting. Eight (8) foot length.
Front motor mount upper insulator. Two (2) required per truck. Useage: 1957-60: 6 cylinder 223 F100-250 Series, 8 cylinder 292 F100-700 Series. 1957-61: 6 cylinder 223 F350-600 Series before Serial #140,001.
Front vent window division post seal. Fully molded with metal core and attaching tabs.
Lacing, hood cowl.
Front motor mount lower insulator. Useage: 1957-60: 6 cylinder 223 F100-250 Series, 8 cylinder 292 F100-700 Series 1957-61: 6 cylinder 223 F350-600 Series before Serial #140,001.
Seals, front fender rear to body pillar.
Seal, radiator air deflector to hood.
Insulator, transmission gear shift column lever.
Insulator, gear shift.
Set, spring clamp liner. Front spring takes eight pieces for both sides Rear spring takes four pieces for both sides. Six (6) piece set.
Knob, gear shift lever.
Bumper, front axle.
Grommet, fuel filler neck. This grommet fits the fuel filler neck. C1TZ-9080-A
Seal, outside door handle button.
Pads, outside door handle. Four (4) piece set.
Seals, front fender to cowl. Installs between fender and cab.
Knob, gear shift lever. Used on column shift models. Sphere shape.
Seal, steering column to floor.
Seals, top back of front fender to cab.
Bumpers, tailgate chain. Fits in bracket.
Gaskets, taillight lens to housing. Shield type.
Gaskets, parking light lens. Useage: 1957-63: Style-Side Trucks 1957-58: F100-600 Trucks
Bushing, Rear Spring - Front #B6S-5781-A
Front vent window division post seal. Extruded rubber strip only that will have to be attached to division post.
Grommet, speedometer cable housing firewall.Ford Truck 1956 Grommet, gas line through floor pan. Ford Truck 1957-60 Grommet, speedometer cable.
Seal, cowl ventilator grille anti-squeak. Six (6) piece set.
Bumpers, side of tailgate to bed. Installs in tailgate.
Gasket, license plate light lens. Shield type.
Grommet, mirror arm to door.
Bumpers, glovebox and/or fuel filler door. Used as glove box door bumpers for all models listed, used as fuel door bumper for 1950-51 cars and 57-59 retractables only.
Seal, steering column to bracket anti-squeak.
Plug, cowl and floor pan. This body plug covers a sheet metal hole that is one and one seven eighths (1-7/8) inch in diameter.
Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on
Bumper, brake and clutch pedal arm.
Bumpers, ashtray door or glove box door.
Gasket, license plate light lens.
Plug, door mirror bracket hole. Used when not installing mirror.
Stop, glovebox arm.Ford Truck 1957-64 Stop, glovebox arm. Requires 2 each. Ford Cars 1955-68 Bumper, glovebox door check arm stop.
Bushing, shock absorber link. May be used for front or rear spring.Chrysler 1951-54 Bushing, rubber, shock absorber link.
Grommet, gas line through floor pan.
Grommet, choke and throttle rod or hood pull cable firewall.1932-47: All Trucks for choke & throttle rod; 1957-63: All Trucks for choke & wiper.