Search Results

65 items found matching 1958 Oldsmobile Dynamic 88 2 door Sedan
The listing below contains just short, abbreviated descriptions.
Please click on the part name in red in order to get a complete description.
Body Weatherstrip Kit

p/n: 90-3117-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

$278.70/set
$250.80/set
10% discount
Kit
Front Door Vent Window Kit

p/n: 90-0435-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$260.60/set
$247.60/set
5% discount
Kit
Front Door Vent Window Weatherstrips

p/n: 38-0102-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$210.40/pr.
In Stock
Windshield Gasket

p/n: 70-0746-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.

$190.90/ea.
In Stock
Rear Window Gasket

p/n: 70-1259-81

This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.

$187.30/ea.
In Stock
Front Door weatherstrip

p/n: 70-1560-72

Door edge weatherstrip. This part is the primary door to body weatherstrip.

$179.20/pr.
Made to Order Takes 2-3 Days
Harmonic Balancer Service

p/n: 70-1966-12

Harmonic Balancer - Revulcanization service only. Send in core and allow three weeks for service.

$167.00/ea.
Call or Email
Motor Mount

p/n: 25-0061-11

Insulator, engine support, rear, right and left.Oldsmobile 1957: All Hydramatic models 1958: Hydramatic models exc. Air-Ride

$109.20/pr.
In Stock
Motor mount service

p/n: 25-0070-11

Mounting Assembly, engine to frame, front lower. Revulcanization service only.Length: 4.50 inches.

$99.80/ea.
Call or Email
Motor mount service

p/n: 25-0063-11

Motor mount, upper, engine bracket at front cross member. One (1) per vehicle. Revulcanization service only.Length: 6.1875 inches. Width: 2.875 inches.

$95.80/ea.
Call or Email
Motor mount service

p/n: 25-0073-11

Insulator, engine mount, front lower. Revulcanization service only.Length: 5.125 inches.

$93.30/ea.
Call or Email
Prop shaft support

p/n: 25-0043-25

Insulator, drive shaft support, center, molded rubber on heavy steel core. Note: Not used on models with Air Ride suspension.

$72.00/ea.
Call or Email
Call to order
Hood To Cowl Weatherstrip

p/n: 70-0940-42

Weatherstrip, hood to cowl. An exact reproduction of the original profile. This seal mounts at the rear of the engine bay directly to the body.

$62.40/set
In Stock
Door weatherstrip

p/n: 70-0551-73

Weatherstrip, front door auxiliary, on door at beltline, right and left. Uses snap-in fasteners, four (4) each included.

$60.00/set
In Stock
Support arm bumper

p/n: 25-0055-32

Bumpers, front wheel upper control arm.

$58.30/pr.
Made to Order Takes 2-3 Days
Rigid Run Channel

p/n: 70-0347-58

Channel, rigid run, window division bar. Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar.

$52.10/pr.
In Stock
Vent division bar weatherstrip

p/n: 50-0485-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$50.20/pr.
Made to Order Takes 2-3 Days
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0773-WT

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$49.50/ea.
In Stock
Headlight seal

p/n: 70-1465-14

Seal, headlight outer rim to sealed beam retainer ring. Possible fit for models with dual headlights.Width: .375 inches. Height: .9375 inches.

$46.40/set
In Stock
Window Sash / Beltline Channel

p/n: 70-0651-58

Weatherstrip, window sash channel (beltline), inner. Rigid, rubber covered weatherstrip with flock lining and one fourth (1/4) inch chrome edge. Used on front door, rear door and rear quarter window. Six (6) foot strip.

$40.50/ea.
In Stock
Fenderskirt edge seal

p/n: 60-0201-45

Seal, fenderskirt edge. Proper profile for most skirts of this period, including Fox-Craft. Sixty (60) inch strip.Length: 60. inches. Width: .75 inches.

$40.00/pr.
In Stock
Trunk Weatherstrip

p/n: 70-0773-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$39.50/ea.
In Stock
Steel sash channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

$39.10/ea.
In Stock
Rigid run channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining, one half (1/2) inch deep by one half (1/2) inch wide, fifteen (15) inches long.

$36.10/pr.
In Stock
Brake & Clutch Pedal Pads

p/n: 25-0058-22

Pads, brake and clutch pedal. Two (2) per car. Length: 4.0 inches. Width: 2.5 inches.

$26.80/pr.
In Stock
Splash apron

p/n: 70-3065-45

Filler, splash apron. A-arm dust shield two (2) piece set. Die cut masticated rubber. Includes all factory style holes required for installation.

$24.10/pr.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$18.80/ea.
In Stock
Rocker panel dust shield cover

p/n: 70-2392-45

Cover, rocker panel inner dust shield. Fully molded with proper attaching teeth and flap.

$18.30/pr.
In Stock
Door handle gasket kit

p/n: 50-0515-69

Gasket set, outside door handle. Six (6) piece set for two (2) doors.

$17.60/set
In Stock
Window stop stem bumper

p/n: 33-0675-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required. (See sketch and our #33-0540-62).

$15.10/pr.
In Stock
Glovebox door check grommet

p/n: 70-0968-88

Grommet, glove box door cushion. One and three quarters long (1-3/4") and thirteen sixteenths (13/16")wide.Length: 1.75 inches. Width: .8125 inches.

$14.00/ea.
In Stock
Hood bumper

p/n: 25-0091-42

Bumper, hood side to fender ledge. Six (6) used per car.Length: 1.25 inches. Width: .875 inches.

$12.30/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.00/ea.
In Stock
Body mounting pad

p/n: 50-0507-48

Pad, body mounting. Fully molded rubber. Two inches (2") outside diameter by seven eighths inch (7/8") inside hole diameter by three fourths inch (3/4") height.

$10.90/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$10.80/sqf
In Stock
Window stop stem bumper

p/n: 33-0622-62

Bumper, window stop. One and one fourth (1-1/4) inch square by one half (1/2) inch thick. Compare with our #33-0540-62 and #33-0675-62.Length: 1.

$9.50/ea.
In Stock
Rear spring bushing

p/n: 70-0549-35

Bushing, spring and shackle, rear.

$7.90/ea.
In Stock
Window stop stem bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$7.90/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$7.80/ea.
In Stock
Body Bolt Cushion

p/n: 60-0189-48

Pad, for each body bolt under frame bracket, to cushion washer and nut. Fully molded rubber. One and seven eighths inch (1 7/8") outside diameter by seven eighths inch (7/8") inside hole diameter by nine sixteenths inch (9/16) height.

$7.60/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$7.40/ft.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.00/ea.
In Stock
Brown door lock knob

p/n: 70-0354-70

Knob for inside door lock control rod. Neutral brown color rubber, 3/32 inch hole. See also our #70-0660-70.

$6.30/ea.
In Stock
Shock and stabilizer grommet

p/n: 70-0274-33

Grommet, shock and stabilizer link. Eight (8) required per car. Fully molded rubber with locating collar. One and one sixteenth inch (1 1/16") outside diameter by nine sixteenths inch (9/16") locating collar outside diameter by three eighths inch (3/8") i

$6.30/ea.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0510-WT

Peel-N-Stick Trunk Weatherstrip made from high quality EPDM sponge rubber. 3M Peel-N-Stick backing provides superior adhesion for reliable performance. Makes for an easier installation of deck lid weatherstripping. Also excellent for use in many different applications and on many different vehicle models.

$6.20/ft.
In Stock
Trunk Weatherstrip

p/n: 70-0346-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$6.20/ft.
In Stock
Trunk Weatherstrip

p/n: 70-0510-85

This weatherstrip was designed from an original part for a specific application but has many uses outside of its original purpose. The seal is structured to be applied to the body of the car.

$5.90/ft.
In Stock
Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available.

$5.80/ft.
In Stock
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$5.70/ea.
In Stock
Door drain hole seal

p/n: 60-0442-70

Weatherstrip, door bottom drain hole seal. Also used on tailgate of station wagon. (Two (2) required for this use).Length: 4.0 inches.

$5.60/ea.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1111-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models.

$5.50/ft.
In Stock
Sash channel filler 1/16 cork

p/n: 70-1115-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherstrip type of filler. This is the highest quality linen back, rubber cork composition on

$4.69/ft.
In Stock
Firewall retainer

p/n: 60-0586-20

Retainer, firewall insulation panel. "Christmas Tree" style popular during this time. Constructed of vinyl plastic. Up to ten (10) required per car.

$4.60/ea.
In Stock
Door lock bumper

p/n: 34-0484-71

Bumper, door lock post, upper, one half (1/2) inch diameter by one half (1/2) inch tall, plated screw.Height: .50 inches.

$4.30/ea.
In Stock
Sash Channel Filler 1/16 Rubber

p/n: 70-2170-57

Filler strip, window glass sash channel. One sixteenths (1/16) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality rubber like polymer designed for settin

$4.29/ft.
In Stock
Door or tailgate bumper

p/n: 33-1228-71

Bumper pads, door or tailgate. Twin retainer style. Three eighths (3/8) inch by seven eighths (7/8) inch by one half (1/2) inch high.

$4.20/ea.
In Stock
Sash channel filler 1/32 cork

p/n: 70-1114-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler. This is the highest quality linen back, rubber cork composition

$3.99/ft.
In Stock
Sash Channel Filler 1/32 Rubber

p/n: 70-2169-57

Filler strip, window glass sash channel. One thirty seconds (1/32) inch thick by 1-1/2 inches wide. For all applications fitting glass to sash channel not requiring weatherlip type of filler.

$3.99/ft.
In Stock
Door bumper

p/n: 33-1227-71

Bumper, door edge, twin retainer style, three eighths (3/8) inch wide by seven eighths (7/8) inch long by three eighths (3/8) inch high.

$3.50/ea.
In Stock
Trunk floor pan plug

p/n: 35-0070-87

Plug, trunk and floor pan drain hole. Buick 1950-65 Plug, trunk and floor pan drain hole.

$3.20/ea.
In Stock
Door weatherstrip fastener

p/n: 60-0260-73

Clip, retainer for door edge weatherstrip. Two (2) prong type with oval screw hole, spring steel, cadmium plated.Width: .875 inches. Height: .9375 inches.

$3.10/ea.
In Stock
Hood bumper

p/n: 70-0294-42

Bumper, hood rest, cap type for adjustable screw, fifteenth sixteenths (15/16) inch, seven sixteenths (7/16) inch thick.

$3.00/ea.
In Stock
Trunk bumper

p/n: 33-0293-87

Bumper, trunk and tailgate lid bumper support, on lid.

$2.80/ea.
In Stock
Door weatherstrip fastener

p/n: 50-0198-73

Fastener, door edge weatherstrip, steel. One half (1/2) inch long, thirteen thirty second (13/32) inch diameter head, black finish.

$2.50/ea.
In Stock
Lock cylinder gasket

p/n: 60-0641-69

Gasket, door or trunk lock cylinder. Exact reproduction

$2.10/ea.
In Stock