Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

81 items found matching 1960 Buick Electra 2 door Hardtop
Body Weatherstrip Kit

p/n: 90-3109-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

10% discount
Hardtop roof rail weatherstrip

p/n: 70-0611-68

Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised.

In Stock
Front Door Weatherstrip

p/n: 70-0745-72

Door edge weatherstrip with molded ends. This part is the primary door to body weatherstrip. It has molded ends and includes 6 pins and 24 sockets for easy installation. Made of top quality rubber.

In Stock
Front Door Vent Window Set

p/n: 90-0410-90

This front door vent window weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

5% discount
Rear Window Gasket

p/n: 60-0498-81

This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.

In Stock
Windshield Gasket

p/n: 70-0671-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.

In Stock
Transmission mount service

p/n: 50-0429-25

Transmission mount. Revulcanization service only.Length: 8.0 inches. Width: 3.0625 inches.

Call or Email
Front Door Vent Window Weatherstrips

p/n: 38-0071-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

In Stock
Torque ball service

p/n: 50-0190-27

Retainer, torque ball, heavy steel jacket with molded rubber inner collar. Revulcanization service only.

Call or Email
Rigid Run Channels

p/n: 70-0536-58

A Rigid Run Channel pair with bright beaded edge, mohair lined channel, die trimmed and round formed at the top. Sold in 29" pairs.

In Stock
Splash Apron / A-Arm Dust Shield Filler Set

p/n: 70-3061-45

This comprehensive ten (10) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Left and Right made pieces fit over suspension a-arms and inside front inner fenders.

In Stock
Support arm bumper

p/n: 50-0526-32

Bumper, lower support arm. With metal core and attaching bolt. One (1) pair per car.Width: 2.4375 inches. Height: 4.0 inches.

Made to Order Takes 2-3 Days
Track bar bushing

p/n: 50-0527-34

Bushing, track bar. Molded out of BUNA rubber with correct metal sleeve like original.Height: 1.875 inches.

In Stock
Door weatherstrip hinge pillar

p/n: 60-0326-73

Weatherstrip, front door opening. Auxiliary on door hinge pillar at beltline, right and left. Sometimes called "L" or "J" strips. Fully molded with authentic configuration to help guide water to the outside of vehicle. Set includes four (4) button-type fa

In Stock
Run channel upper bumper

p/n: 70-0565-62

Bumper, side window glass.

In Stock
Rigid Run Channel

p/n: 70-0347-58

Stainless beaded edge, mohair-lined, exact replacement for rear side of division bar. Available in 15" pairs.

In Stock
Beltline Weatherstrip

p/n: 70-0651-58

Rigid, rubber covered weatherstrip with flock lining and one fourth (1/4) inch chrome edge. Available in a 6ft piece.

In Stock
Lock pillar filler

p/n: 70-0782-79

Door lock pillar seal. One and five eighths inch (1-5/8") wide and two and three quarter inches (2-3/4") high. This part seals the bottom of the rear side window, and may also be known as a door jamb seal. Fully molded authentic rubber construction with m

In Stock
Vent division bar weatherstrip

p/n: 60-0636-56

Front vent window division post seal. Fully molded with metal core and attaching tabs. This part fits opposite the glass run channel and seals the vent window when the vent is closed. See Front door vent weatherstrip for main rubber seal.

In Stock
Side Window Leading Edge

p/n: 70-0815-80

Side window vertical leading edge weatherstrip.

In Stock
Front Coil Spring Pad

p/n: 50-0476-35

Pad, front coil spring insulator, upper. Two (2) per car, five and one eighths (5-1/8) inch outside diameter. Height: .28125 inches.

In Stock
Taillight lens gasket

p/n: 70-1793-15

Gasket, taillight lens. Made of die cut sponge rubber to original configuration.

In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0773-WT

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

In Stock
Side Window Sash Channel

p/n: 70-0641-58

Sash channel, side window glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required.

In Stock
Rigid Run Channel

p/n: 70-0516-58

Channel, rigid run, lower side window below beltline, zinc plated steel with black cloth lining. Available in 15" pairs.

In Stock
Gravel shield anti-squeak

p/n: 70-1279-30

Seals, rear bumper splash guard. Fully molded rubber. Twenty-two (22) inches long per side. Extrusion ends measure one and eleven sixteenths inch (1-11/16") width by three eighths inch (3/8") height.

Made to Order Takes 3 Days
Trunk Weatherstrip

p/n: 70-0773-84

This trunk weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

In Stock
Hood to cowl weatherstrip

p/n: 50-0495-43

Weatherstrip, hood to cowl.

In Stock
Firewall grommet

p/n: 70-1914-20

Grommet, firewall, for heater control cabled wiring harness.Width: 2.875 inches. Height: 1.5625 inches.

In Stock
Door bumper

p/n: 70-1455-41

Bumper, fuel filler door.Length: 5.4375 inches. Width: .75 inches.

In Stock
Door handle gasket kit

p/n: 70-0925-69

Gasket set, outside door handle. Die cut rubber construction. Six (6) piece set for two (2) handles.

In Stock
Body mounting pad

p/n: 50-0506-48

Pad, body mounting. Rubber with metal core, locating collar and metal sleeve as original. Metal sleeve is removable, measures one and one eighth inch (1 1/8") long when removed. Part dimensions with metal sleeve inserted are: One and seven eighths inch (1 7/8")

In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

In Stock
Body mounting pad

p/n: 50-0508-48

Pad, body mounting. Rubber with metal nut and washer molded in. One and seven eighths inch (1 7/8") outside diameter by thirteen sixteenths inch (13/16") nut outside length by seven sixteenths inch (7/16") inside hole diameter. Three fourths inch (3/4") c

In Stock
Taillight Lens Gaskets

p/n: 70-4054-15

This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. These reproduction gaskets fit between taillight lens & taillight housing.

In Stock
Body mounting pad

p/n: 70-2165-48

Pad, body mount, lower bolt retaining. Rubber with metal washer molded in. One and three fourths inch (1 3/4") outside diameter by one inch (1") inside diameter with one half inch (1/2") hole through center of retaining washer that is molded in by seven e

In Stock
Folding seat bumper

p/n: 70-2579-88

Bumper, folding front seat frame rest cushion. Manufactured from dense rubber with a molded in metal retaining washer. Two (2) used per car.

In Stock
Spring Insulator, rear

p/n: 70-3281-35

Spring Insulator, rear

In Stock
Antenna grommet

p/n: 50-0513-21

Grommet, antenna lead through sheet metal.

In Stock
Dimmer Switch Grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

In Stock
Body Mount Isolator

p/n: 50-0507-48

Isolator, body mounting. Fully molded rubber. Two inches (2") outside diameter by seven eighths inch (7/8") inside hole diameter by three fourths inch (3/4") height.

In Stock
Masticated Rubber Sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

In Stock
Strut rod bushing

p/n: 50-0522-27

Bushing, strut rod at drive shaft tube. Two (2) per car required.Length: 1.65625 inches.

In Stock
Hood bumper

p/n: 50-0489-42

Bumper, hood to fender ledge. Number required varies. Molded rubber type.Width: 1.5 inches. Height: 1.0 inches.

In Stock
Hood bumper

p/n: 50-0205-42

Bumper, adjustable type, hood front. Cadmium plated bolt (5/16)-18 x 1-1/4", rubber bumper 1-1/8" in diameter, 5/8" thick.Height: 1.875 inches.

In Stock
Glovebox Link Bumper

p/n: 50-0367-88

Bumper, glove box check link. Fits on glove box door arm as needed.Length: .75 inches. Width: .5625 inches. Height: .3125 inches.

In Stock
Window Stop Stem Bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

In Stock
Shift lever grommet

p/n: 50-0284-24

Grommet, shift lever insulator. One (1) per car. Three eighths (3/8) inch inside diameter by five eighths (5/8) inch barrel by one half (1/2) inch long.

In Stock