Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

59 items found matching 1961 Buick Special 2 door Coupe
Front Door Vent Window Set

p/n: 90-0419-90

This front door vent window weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$208.49/set
Kit
Rear Window Gasket

p/n: 50-0425-81

This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

$190.79/ea.
Made to Order Takes 5-7 Days
Body Weatherstrip Kit

p/n: 90-3111-90

This kit includes the major weatherstrip components needed for the body of your restoration project.

$188.89/set
Kit
Front Door Weatherstrip

p/n: 50-0433-72

Door edge weatherstrip fully molded. This part is the primary door to body weatherstrip. Includes clips.

$172.99/pr.
In Stock
Windshield Gasket

p/n: 50-0291-50

This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

$171.49/ea.
In Stock
Front Door Vent Window Weatherstrips

p/n: 38-0082-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$164.39/pr.
Made to Order Takes 5-7 Days
Transmission mount service

p/n: 50-0463-25

Mount, transmission support. One (1) per car. Revulcanization service only.Length: 5.25 inches. Width: 2.25 inches.

$144.89/ea.
Call or Email
Coil spring insulator pad

p/n: 70-1772-35

Insulator, coil spring, fully molded.

$71.99/pr.
Made to Order Takes 5-7 Days
Beltline Weatherstrips

p/n: 70-1121-61

Weatherstrip, outer beltline. For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 3ft pair.

$64.69/pr.
In Stock
Beltline weatherstrip

p/n: 50-0375-60

Weatherstrip, front door inner beltline.

$61.79/pr.
In Stock
Beltline Weatherstrip

p/n: 70-1120-61

Weatherstrip, outer beltline. For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 6ft lengths.

$59.99/ea.
In Stock
Beltline Weatherstrip Channel - 5 Foot

p/n: 70-0651-58

A five (5) foot length of rigid channel with a flocked rubber lip and a flat stainless bead. Can be used as the inner beltline weatherstrip on front doors, rear doors and quarter windows.

$57.79/ea.
In Stock
Vent division bar weatherstrip

p/n: 50-0337-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$55.19/pr.
In Stock
Stabilizer Bar End Link Set

p/n: 60-0221-33

Twenty-two (22) piece Stabilizer Bar End Link set for both sides of one (1) vehicle, fits front or rear bar. Order two (2) sets for vehicles with front and rear stabilizer bars. Hex head bolt 3/8"-16 NF x 6-15/16" long. Comes with metal sleeve, metal cup washers and rubber grommets.

$77.89/set
$54.70/set
30% discount
In Stock
Flexible Run Channel

p/n: 60-0583-58

Made with an electrostatic flocked rubber that has flexibility and reduces friction to secure and let the glass slide inside the channel. Available in 96" lengths.

$53.59/ea.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0774-WT

This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body. Easy to install 3M Peel-N-Stick backing provides superior adhesion for reliable performance.

$47.19/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0774-84

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$36.89/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$22.59/ea.
In Stock
Body mounting pad

p/n: 70-2165-48

Pad, body mount, lower bolt retaining. Rubber with metal washer molded in. One and three fourths inch (1 3/4") outside diameter by one inch (1") inside diameter with one half inch (1/2") hole through center of retaining washer that is molded in by seven e

$18.59/ea.
In Stock
Window Stop Stem Bumper

p/n: 33-0675-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$18.19/pr.
In Stock
Door Handle Gasket Set

p/n: 50-0560-69

This Door Handle Gasket Set is designed from the original part for superior fitment and seal. This four (4) piece gasket set will do two (2) doors.

$17.99/pr.
In Stock
Dimmer Switch Grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$13.39/ea.
In Stock
Body Mount Isolator

p/n: 50-0507-48

Isolator, body mounting. Fully molded rubber. Two inches (2") outside diameter by seven eighths inch (7/8") inside hole diameter by three fourths inch (3/4") height.

$13.29/ea.
In Stock
Masticated Rubber Sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$13.19/sqf
In Stock
License lens gasket

p/n: 50-0357-17

Gasket set, rear license light assembly. One (1) rubber ring and one (1) cork rubber gasket comprise set.

$12.79/set
In Stock
Hood bumper

p/n: 50-0205-42

Bumper, adjustable type, hood front. Cadmium plated bolt (5/16)-18 x 1-1/4", rubber bumper 1-1/8" in diameter, 5/8" thick.Height: 1.875 inches.

$11.39/ea.
In Stock
Glovebox Link Bumper

p/n: 50-0367-88

Bumper, glove box check link. Fits on glove box door arm as needed.Length: .75 inches. Width: .5625 inches. Height: .3125 inches.

$9.69/ea.
In Stock
Window Stop Stem Bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$9.69/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$9.59/ea.
In Stock
Antenna mount pad

p/n: 50-0559-21

Pad, antenna mounting. Used on models with manual antennas only.

$9.29/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$8.89/ft.
In Stock
Door Weatherstrip With Clips

p/n: 70-1245-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$8.79/ft.
In Stock
Brown Door Lock Knob

p/n: 70-0660-70

This is the Knob or push button for the inside door lock. The part fits over 1/8" steel rod to door lock. Neutral brown color that may be lacquered with other colors as required. A hard rubber part fits many different vehicles.

$8.59/ea.
In Stock
Steering knuckle support seal

p/n: 50-0199-35

Seal, steering knuckle support, upper pivot pin. Four (4) required per car.Height: .5 inches.

$7.89/ea.
In Stock
Hood bumper

p/n: 70-2020-42

Bumper, hood ledge. Original type retainer and proper factory type profile.Width: .75 inches. Height: 1.25 inches.

$7.79/ea.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0510-WT

This Peel-N-Stick Trunk Weatherstrip is made from a high-quality EPDM sponge rubber. Available by the foot.

$7.69/ft.
In Stock
Trunk Weatherstrip

p/n: 70-0346-85

Designed from an original part for a specific application but has many uses outside of its original purpose. Available by the foot.

$7.69/ft.
In Stock
1/2" License Plate Bumper

p/n: 33-0368-30

Fully molder rubber license plate bumper.

$7.29/ea.
In Stock
Door Weatherstrip Without Clips

p/n: 70-1244-73

Door edge weatherstrip made from high-quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$7.29/ft.
In Stock
Trunk Weatherstrip

p/n: 70-0510-85

Designed from an original part for a specific application but has many uses outside of its original purpose. Available by the foot.

$7.29/ft.
In Stock
1/4" Universal Mounting Pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available. Available by the foot.

$7.19/ft.
In Stock
Firewall grommet

p/n: 70-1771-20

Grommet, speedometer cable (also used for trunk lid release cable through rear compartment).

$7.19/ea.
In Stock
2-1/4" Body Hole Plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$6.99/ea.
In Stock
Door Weatherstrip With Out Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1111-73

Door edge weatherstrip made from high-quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$6.79/ft.
In Stock
Filler, Sash Channel, Lower

p/n: 70-2844-57

Filler, sash channel, lower

$6.79/ft.
In Stock
1/16" Cork Sash Channel Filler

p/n: 70-1115-57

Cork sash channel filler. Available by the foot.

$5.99/ft.
In Stock
1/16" Sash Channel Filler

p/n: 70-2170-57

Sash channel filler. Available by the foot.

$5.19/ft.
In Stock
Door or Tailgate Bumper

p/n: 33-1228-71

Bumper pads, door or tailgate. Twin retainer style.

$5.19/ea.
In Stock
1/32" Cork Sash Channel Filler

p/n: 70-1114-57

Sash channel filler. Cork. Available by the foot.

$4.99/ft.
In Stock
1/32" Sash Channel Filler Rubber

p/n: 70-2169-57

Sash channel filler. Available by the foot.

$4.99/ft.
In Stock