Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

92 items found matching 1961 Cadillac DeVille 2 door Hardtop
Body Weatherstrip Kit

p/n: 90-3161-90

This kit includes the major weatherstrip components and some other essential parts needed for the body of your restoration project.

$537.29/set
Kit
Front Motor Mount Revulcanizing Service

p/n: 70-0548-11

This Front Motor Mount revulcanizing service replaces the rubber in your original Motor Mounts to make them like new again. The process is designed for the original factory mounts only. Send in cores and allow three weeks for service.

$224.19/pr.
Call to order
Front Door Vent Window Set

p/n: 90-0426-90

This four (4) piece Front Door Vent Window Set contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$201.49/set
Kit
Rear Window Gasket

p/n: 70-0823-81

This rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise, factory fit.

$198.49/ea.
In Stock
Hardtop roof rail weatherstrip

p/n: 70-0902-68

Hardtop roof rail weatherstrip. This part fits on the roof of the vehicle and seals the side window when the window is fully raised. Includes two (2) clips.

$187.39/pr.
Made to Order Takes 5-7 Days
Front Door Weatherstrip

p/n: 70-0819-72

Door edge weatherstrip with molded ends. This part is the primary seal which seals the door to body. Includes four (4) pins and twenty-six (26) sockets for easy installation.

$174.49/pr.
In Stock
Windshield Gasket

p/n: 27-0055-50

This Windshield Gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit.

$170.89/ea.
In Stock
Prop shaft support service

p/n: 70-0748-27

Bearing support bracket assembly, drive shaft center bearing. Revulcanization service only. .

$165.19/ea.
Call or Email
Front Door Vent Window Weatherstrips

p/n: 38-0092-55

These Front Door Vent Window Weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$156.99/pr.
In Stock
Cadillac Master Parts List 1957 - 1964 (Reprint)

p/n: 07-1443-07

This 1957-1964 Cadillac Master Parts List - Two (2) Volume set licensed Detroit Iron reprint provides the most comprehensive repair information in paper format. This OEM PARTS manual reproduction provides detailed original part numbers, part assembly diagrams / illustrations and part textual details for all vehicle subsystems.

$137.99/set
Ships in 5-7 Days
Splash Apron / A-Arm Dust Shield Filler Set

p/n: 70-2495-45

This fourteen (14) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.

$118.99/set
In Stock
Steel sash channel

p/n: 70-0846-58

Channel, front window lower sash. Formed steel channel only, not chromed. Ready for attaching to your old brackets.

$108.99/pr.
In Stock
Cowl drain gutter

p/n: 70-0780-73

Gutter, windshield lower corner, left and right. Rubber with metal core as original. Seven and three quarters long (7-3/4").Length: 7.75 inches.

$90.39/pr.
In Stock
Fenderskirt Edge Seal

p/n: 70-0154-45

Seal, fenderskirt edge, exact copy, trim notch for skirt lock at installation. Compare sketch with your original to be sure. Two (2), five (5) foot strips.

$75.89/pr.
In Stock
Hood to cowl weatherstrip

p/n: 70-2130-42

Weatherstrip, hood to cowl. Correct rubber cross section extrusion. Uses our part numbers #70-1250-42, #70-1251-42 & 70-1252-42 (sold separately) to adjust hood.

$73.69/ea.
In Stock
Axle rebound pad

p/n: 70-2225-32

Bumper, rear spring axle impact. Located on frame rail. Rubber only, does not include metal retaining clips or bolts.Width: 1.9375 inches. Height: 2.

$71.19/pr.
In Stock
Vent frame deflector

p/n: 70-1792-62

Deflector, beneath vent frame.Length: 5.75 inches. Width: 1.0 inches.

$66.49/pr.
In Stock
U Jamb lock pillar filler

p/n: 70-0982-79

Door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal.

$65.29/pr.
In Stock
Beltline Weatherstrips

p/n: 70-1121-61

These Beltline Weatherstrips (sometimes called "scraper seal") come in a three (3) foot pair. For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 3ft pair.

$64.69/pr.
In Stock
Front coil spring pad

p/n: 70-2302-35

Pad, front coil spring insulator cushion. Fully molded, mounts at top of front coil springs.

$63.69/pr.
In Stock
Outer Beltline Weatherstrip

p/n: 70-0829-61

This Outer Beltline Weatherstrip is fully molded with EPDM rubber over a corrosion resistant brass metal core. These window scrapers are for models with the chrome strip on the door. Designed like original with attaching tabs.

$63.59/pr.
In Stock
1935-1974 Cadillac Factory Parts Manual, CD

p/n: 07-1346-07

This GM Licensed Detroit Iron CD provides the most comprehensive set of digital Cadillac Factory parts manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.

$62.59/ea.
Body / Cowl to Fender Seals

p/n: 70-2787-43

This Body / Cowl to Fender Seals pair is designed from the original part for superior fitment and function. Filler seal pieces are die cut from quality masticated rubber to authentic original dimensions.

$61.89/pr.
In Stock
Beltline Weatherstrip

p/n: 70-1120-61

This Beltline Weatherstrip comes in a six (6) foot length for the outer beltline (sometimes called "scraper seal"). For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in 6ft lengths.

$59.99/ea.
In Stock
Beltline Weatherstrip Channel

p/n: 70-0651-58

This Beltline Weatherstrip Channel is a five (5) foot length of rigid channel with a flocked rubber lip and a flat stainless bead. Can be used as the inner beltline weatherstrip on front doors, rear doors and quarter windows.

$57.79/ea.
In Stock
Front Stabilizer Bar End Link Kit

p/n: 70-2110-33

Kit, front stabilizer bar link assembly replacement. Twenty-two (22) piece set. One (1) kit for both sides of one (1) car. Hex head bolt. 5/16"-18nc x 6-15/16" lg. Comes with metal sleeve, metal cup washers and rubber grommets.

$56.89/pr.
In Stock
Run Channel Upper Bumper

p/n: 70-1044-62

This run channel upper bumper is manufactured as original with brass metal core.

$56.49/pr.
In Stock
Side Window Leading Edge

p/n: 70-0832-80

Side window vertical leading edge weatherstrip.

$55.69/pr.
In Stock
Vent division bar weatherstrip

p/n: 70-0849-56

Front vent window division post seal. Eleven and one half inches (11.5") and one half inch high. Fully molded with metal core and attaching tabs.

$55.19/pr.
In Stock
Hood to cowl weatherstrip

p/n: 70-3120-43

Weatherstrip, hood to cowl side seals. Fully molded reproduction makes left and right.

$53.89/pr.
In Stock
Peel-N-Stick Trunk Weatherstrip

p/n: 70-0773-WT

This Peel-N-Stick Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$51.19/ea.
In Stock
Rear coil spring pad

p/n: 70-0945-32

Insulator, rear coil spring.

$50.29/pr.
In Stock
Hinge Seal

p/n: 70-1460-70

This hinge seal is installed on the front door hinge pillar at the beltline. These seals are sold as a pair for the left and right side.

$49.49/pr.
In Stock
Radiator Upper Support Filler

p/n: 70-2502-45

This single piece Radiator Upper Support Filler is designed from the original part for superior fitment and function. Filler piece is die cut from quality masticated rubber to authentic original dimensions. Fits at radiator to radiator upper support.

$42.99/ea.
In Stock
Suspension arm bumper

p/n: 70-1021-32

Bumper, front or rear suspension, upper. Uses two (2) per car on front suspension, one (1) per car on rear.

$41.29/ea.
In Stock
Trunk Weatherstrip

p/n: 70-0773-84

This Trunk Weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the trunk directly to the body.

$40.89/ea.
In Stock
Radiator mounting pad

p/n: 70-0963-31

Radiator mounting pad, insulator. Up to four (4) used per car.Length: 6.0 inches.

$29.49/ea.
In Stock
Auxiliary / Frame Dust Shield

p/n: 70-3084-45

This Auxiliary / Frame Dust Shield pair is designed from the original part for superior fitment and function. The two (2) shield pieces are die cut from quality masticated rubber to authentic original dimensions. These shield pieces fit under the vehicle sway bar, near the frame.

$26.99/pr.
In Stock
Metal sleeved grommet

p/n: 70-0203-41

Flanged rubber grommet with metal sleeve bushing. Used as part of the accelerator relay lever. Also used from 1959-61 on all Cadillac models as a bushing for the windshield wiper relay lever adaptor.

$26.89/ea.
In Stock
Body Mount Isolator Pad

p/n: 70-0929-48

Body Mount Isolator Pad - Rubber with metal core and locating collar as original part. Part dimensions = Two and three sixteenths inch (2 3/16") square by one inch (1") overall height with thirteen sixteenths inch (13/16") inside bolt diameter. Does not include any fastener hardware.

$25.79/ea.
In Stock
Door Handle Gasket Set

p/n: 70-0771-69

This Door Handle Gasket Set is designed from the original part for superior fitment and seal. This six (6) piece gasket set will do two (2) doors.

$24.99/set
In Stock
Taillight Lens Gaskets - In Fin

p/n: 70-3502-15

This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. These reproduction gaskets fit between the taillight lens & taillight housing in fin.

$23.99/pr.
In Stock
Back Up Light Lens Gaskets

p/n: 70-3234-17

This Back Up Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the back-up light lens and the back-up light housing or light bezel.

$23.69/pr.
In Stock
Directional & Parking Light Lens Gaskets

p/n: 70-3115-16

This Turn Signal and Parking Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the Signal / Parking Light Lens and the Signal / Parking Light Housing or Bezel.

$23.69/pr.
In Stock
Taillight Lens Gaskets

p/n: 70-3235-15

This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between taillight lens & taillight housing.

$23.69/pr.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$22.59/ea.
In Stock
Rocker panel dust shield cover

p/n: 70-2392-45

Cover, rocker panel inner dust shield. Fully molded with proper attaching teeth and flap.

$21.99/pr.
In Stock
Headlight Bucket to Fender Seals

p/n: 70-3085-14

This two (2) piece Headlight Bucket to Fender Seal pair is designed from the original part for superior fitment and seal. Die cut from original style masticated rubber for a like factory fit.

$19.69/pr.
In Stock
Hood bumper

p/n: 70-0770-42

Bumper, fender to hood. Correct detail with ridges as original. Four (4) required per car.Length: 1.3125 inches.

$17.19/ea.
In Stock
Plastic guide plate

p/n: 50-0384-62

Guide plate, plastic, attaches to various outer scraper weatherstrips.

$15.49/ea.
In Stock