Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

64 items found matching 1962 Buick Special 4 door Wagon - 2 seat
Quarter window weatherstrip

p/n: 70-3606-77

Weatherstrip, rear stationary side window seals. Both R & L sides. Made with proper joints and cross section.

$278.19/pr.
In Stock
Front Door Vent Window Kit

p/n: 90-0419-90

This front door vent window weatherstrip kit is a four (4) piece set that contains the main vent window seals and division post seals. All of the pieces were designed from original parts for a precise, factory fit.

$194.39/set
Kit
Windshield Gasket

p/n: 50-0291-50

This windshield gasket mounts around the full perimeter of the front glass and has properly molded corners for a precise, factory fit. It also has the slot to accommodate the outer edge's decorative molding.

$161.49/ea.
Made to Order Takes 2-3 Days
Front Door Vent Window Weatherstrips

p/n: 38-0082-55

These front door vent window weatherstrips are the main seals needed to replace the rubber on your vent windows. They are designed and molded from original parts for superior fitment and seal.

$154.79/pr.
In Stock
Transmission mount service

p/n: 50-0463-25

Mount, transmission support. One (1) per car. Revulcanization service only.Length: 5.25 inches. Width: 2.25 inches.

$136.39/ea.
Call or Email
Rear Window Gasket Set

p/n: 70-3605-81

This rear window gasket set mounts around the two (2) smaller windows on each side of the back glass on the liftgate. They are molded as left and right with properly shaped corners for a precise, factory fit.

$125.79/pr.
Made to Order Takes 1-3 Days
Steel sash channel

p/n: 50-0552-59

Sash channel, front door window. Formed metal channel, un-plated, made without cam channel.Length: 20.0 inches. Width: .625 inches. Height: .625 inches.

$123.49/pr.
In Stock
Steel sash channel

p/n: 50-0553-59

Sash channel, rear door window. Formed metal channel, un-plated, made without cam channel.Length: 25.5 inches. Width: .625 inches. Height: .625 inches.

$93.59/pr.
In Stock
Beltline Weatherstrip

p/n: 70-0961-60

Weatherstrip, inner beltline. Thick pile lined, without chrome bead. Available in 4ft pairs.

$71.39/pr.
In Stock
Liftgate Weatherstrip

p/n: 70-2250-85

This liftgate weatherstrip is designed from the original part for superior fitment and seal. The seal mounts around the full perimeter of the liftgate opening directly to the body.

$69.79/ea.
Made to Order Takes 2-3 Days
Beltline weatherstrip

p/n: 70-2252-60

Weatherstrip, rear door window outer scraper seal at beltline. Original type with bright bead attached to seal. Made with proper attaching clips.

$67.49/pr.
Made to Order Takes 2-3 Days
Beltline weatherstrip

p/n: 70-2251-60

Weatherstrip, front door window outer scraper seal at beltline. Original type with bright bead attached to seal. Made with proper attaching clips.

$67.49/pr.
Made to Order Takes 2-3 Days
Coil spring insulator pad

p/n: 70-1772-35

Insulator, coil spring, fully molded.

$66.99/pr.
Made to Order Takes 1-2 Days
Beltline weatherstrip

p/n: 50-0549-61

Weatherstrip, beltline rear door outer.

$62.69/pr.
In Stock
Beltline Weatherstrip

Weatherstrip, outer beltline. For use on front, rear, and quarter windows without a chrome reveal molding at the window beltline. Available in a 3ft pair and 6ft piece.

From $55.89/ea.
View
Beltline weatherstrip

p/n: 50-0551-60

Weatherstrip, beltline rear door inner. Correct material with installed clips.Width: .4375 inches.

$55.79/pr.
Made to Order Takes 2-3 Days
Beltline Weatherstrip

p/n: 50-0550-60

Weatherstrip, beltline front door inner. Correct material with installed clips.Width: .4375 inches.

$55.79/pr.
Made to Order Takes 2-3 Days
Beltline weatherstrip

p/n: 50-0548-61

Weatherstrip, beltline front door outer. For models with chrome reveal molding on door.

$55.59/pr.
In Stock
Window Sash / Beltline Channel

p/n: 70-0651-58

Rigid, rubber covered weatherstrip with flock lining and one fourth (1/4) inch chrome edge. Available in a 6ft piece.

$53.79/ea.
In Stock
Vent division bar weatherstrip

p/n: 50-0337-56

Front vent window division post seal. Fully molded with metal core and attaching tabs.

$49.89/pr.
In Stock
Flexible Run Channel

p/n: 60-0583-58

Made with an electrostatic flocked rubber that has flexibility and reduces friction to secure and let the glass slide inside the channel. Available in 96" lengths.

$48.59/ea.
In Stock
Radiator bracket cushion

p/n: 70-2014-31

Radiator support bracket, insulator, upper. Two (2) used per car.Length: 6.0 inches.

$26.29/ea.
In Stock
Radiator bracket cushion

p/n: 70-2229-31

Radiator support bracket, insulator, lower. Two (2) used per car.Length: 4.5 inches.

$24.29/ea.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$20.39/ea.
In Stock
Body mounting pad

p/n: 70-2165-48

Pad, body mount, lower bolt retaining. Rubber with metal washer molded in. One and three fourths inch (1 3/4") outside diameter by one inch (1") inside diameter with one half inch (1/2") hole through center of retaining washer that is molded in by seven e

$16.69/ea.
In Stock
Door handle gasket kit

p/n: 50-0560-69

Gasket set, door handle. Die cut dense rubber to original dimensions. Four (4) piece set for two (2) doors.

$16.19/pr.
In Stock
Plastic guide plate

p/n: 50-0384-62

Guide plate, plastic, attaches to various outer scraper weatherstrips.

$13.99/ea.
In Stock
Dimmer switch grommet

p/n: 40-0083-88

Grommet, dimmer switch for carpet application.

$11.99/ea.
In Stock
Body Mount Isolator

p/n: 50-0507-48

Isolator, body mounting. Fully molded rubber. Two inches (2") outside diameter by seven eighths inch (7/8") inside hole diameter by three fourths inch (3/4") height.

$11.89/ea.
In Stock
Masticated rubber sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$11.79/sqf
In Stock
License lens gasket

p/n: 50-0357-17

Gasket set, rear license light assembly. One (1) rubber ring and one (1) cork rubber gasket comprise set.

$11.39/set
In Stock
Plastic guide plate

p/n: 50-0385-58

Plastic guide plate, attaches to various outer scraper weatherstrips.Length: 1.625 inches. Width: .625 inches.

$10.89/ea.
In Stock
Hood bumper

p/n: 50-0205-42

Bumper, adjustable type, hood front. Cadmium plated bolt (5/16)-18 x 1-1/4", rubber bumper 1-1/8" in diameter, 5/8" thick.Height: 1.875 inches.

$10.29/ea.
In Stock
Glovebox link bumper

p/n: 50-0367-88

Bumper, glove box check link. Fits on glove box door arm as needed.Length: .75 inches. Width: .5625 inches. Height: .3125 inches.

$8.59/ea.
In Stock
Window Stop Stem Bumper

p/n: 33-0540-62

Cushion (stem bumper), window stop, lower. For front and rear door, rear side and quarter windows as required.

$8.59/ea.
In Stock
Tie rod dust cover

p/n: 70-0537-32

Dust cover, tie rod ends.

$8.49/ea.
In Stock
Antenna mount pad

p/n: 50-0559-21

Pad, antenna mounting. Used on models with manual antennas only.

$8.19/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1112-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$7.99/ft.
In Stock
Tailgate bumper

p/n: 70-1827-87

Bumper, tailgate upper and lower. Fully molded with metal core.Width: 1.0625 inches.

$7.99/ea.
In Stock
Door Weatherstrip w/ Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1245-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$7.89/ft.
In Stock
Brown door lock knob

p/n: 70-0660-70

Knob or push button for inside door lock, fits over 1/8" steel rod to door lock. Hard brown rubber, may be lacquered other colors as required.

$7.69/ea.
In Stock
Steering knuckle support seal

p/n: 50-0199-35

Seal, steering knuckle support, upper pivot pin. Four (4) required per car.Height: .5 inches.

$6.99/ea.
In Stock
Hood bumper

p/n: 70-2020-42

Bumper, hood ledge. Original type retainer and proper factory type profile.Width: .75 inches. Height: 1.25 inches.

$6.89/ea.
In Stock
1/2" License Plate Bumper

p/n: 33-0368-30

Fully molder rubber license plate bumper.

$6.49/ea.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1244-73

Door edge weatherstrip made from high-quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$6.49/ft.
In Stock
1/4" Universal mounting pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available. Available by the foot.

$6.39/ft.
In Stock
Firewall grommet

p/n: 70-1771-20

Grommet, speedometer cable (also used for trunk lid release cable through rear compartment).

$6.39/ea.
In Stock
Body hole plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$6.29/ea.
In Stock
Door Weatherstrip w/o Clips (Sponge Rubber Extrusion - General Use)

p/n: 70-1111-73

Door edge weatherstrip made from high-quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$5.99/ft.
In Stock
Filler, sash channel, lower

p/n: 70-2844-57

Filler, sash channel, lower

$5.99/ft.
In Stock