Need Assistance?

We are here to help.

Call 800-447-0849

Search Results

50 items found matching 1962 Cadillac Series CC 0 door Chassis
Prop shaft support service

p/n: 70-0748-27

Bearing support bracket assembly, drive shaft center bearing. Revulcanization service only. .

$165.19/ea.
Call or Email
Splash Apron / A-Arm Dust Shield Filler Set

p/n: 70-2495-45

This fourteen (14) piece Splash Apron / A-Arm Dust Shield Filler set is designed from the original part for superior fitment and seal. Filler pieces are die cut from quality masticated rubber to authentic original dimensions. Pieces fit over suspension a-arms and inside front inner fenders.

$118.99/set
In Stock
Fenderskirt Edge Seal

p/n: 70-0154-45

Seal, fenderskirt edge, exact copy, trim notch for skirt lock at installation. Compare sketch with your original to be sure. Two (2), five (5) foot strips.

$75.89/pr.
In Stock
Axle rebound pad

p/n: 70-2225-32

Bumper, rear spring axle impact. Located on frame rail. Rubber only, does not include metal retaining clips or bolts.Width: 1.9375 inches. Height: 2.

$71.19/pr.
In Stock
Front coil spring pad

p/n: 70-2302-35

Pad, front coil spring insulator cushion. Fully molded, mounts at top of front coil springs.

$63.69/pr.
In Stock
1935-1974 Cadillac Factory Parts Manual, CD

p/n: 07-1346-07

This GM Licensed Detroit Iron CD provides the most comprehensive set of digital Cadillac Factory parts manuals. The factory manuals on this CD were professionally scanned from the original service and parts manuals.

$62.59/ea.
Beltline Weatherstrip Channel

p/n: 70-0651-58

This Beltline Weatherstrip Channel is a five (5) foot length of rigid channel with a flocked rubber lip and a flat stainless bead. Can be used as the inner beltline weatherstrip on front doors, rear doors and quarter windows.

$57.79/ea.
In Stock
Front Stabilizer Bar End Link Kit

p/n: 70-2110-33

Kit, front stabilizer bar link assembly replacement. Twenty-two (22) piece set. One (1) kit for both sides of one (1) car. Hex head bolt. 5/16"-18nc x 6-15/16" lg. Comes with metal sleeve, metal cup washers and rubber grommets.

$56.89/pr.
In Stock
Radiator Upper Support Filler

p/n: 70-2502-45

This single piece Radiator Upper Support Filler is designed from the original part for superior fitment and function. Filler piece is die cut from quality masticated rubber to authentic original dimensions. Fits at radiator to radiator upper support.

$42.99/ea.
In Stock
Wiper Transmission Gasket

p/n: 60-0593-53

Wiper Transmission Gasket - This is the seal for the wiper motor crank. For two (2) speed wiper motors only. These parts are made of the highest quality and authenticity. Replaces # 4906021.

$37.69/ea.
In Stock
Radiator mounting pad

p/n: 70-0963-31

Radiator mounting pad, insulator. Up to four (4) used per car.Length: 6.0 inches.

$29.49/ea.
In Stock
Taillight Lens Gaskets - In Bumper

p/n: 70-3481-15

This four (4) piece Taillight Lens Gasket set is designed from the original part for superior fitment and seal. The larger gaskets are for the outer lens. The smaller circular gaskets are for the small glass dome shaped lens that sits inside the housing.

$29.29/set
In Stock
Directional Signal or Fog Light Lens Gaskets

p/n: 70-3094-17

This Directional Turn Signal or Fog Light Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the Directional Signal / Fog Light Lens and the Directional Signal / Fog Light Housing or Bezel.

$28.79/pr.
In Stock
Rear spring pad

p/n: 70-0980-32

Pad, rear spring insulator. Two and one half (2-1/2) inches wide, with cloth reinforcement. Used upper and lower on spring. Four (4) used per car.

$27.29/ea.
In Stock
Auxiliary / Frame Dust Shield

p/n: 70-3084-45

This Auxiliary / Frame Dust Shield pair is designed from the original part for superior fitment and function. The two (2) shield pieces are die cut from quality masticated rubber to authentic original dimensions. These shield pieces fit under the vehicle sway bar, near the frame.

$26.99/pr.
In Stock
Metal sleeved grommet

p/n: 70-0203-41

Flanged rubber grommet with metal sleeve bushing. Used as part of the accelerator relay lever. Also used from 1959-61 on all Cadillac models as a bushing for the windshield wiper relay lever adaptor.

$26.89/ea.
In Stock
Body Mount Isolator Pad

p/n: 70-0929-48

Body Mount Isolator Pad - Rubber with metal core and locating collar as original part. Part dimensions = Two and three sixteenths inch (2 3/16") square by one inch (1") overall height with thirteen sixteenths inch (13/16") inside bolt diameter. Does not include any fastener hardware.

$25.79/ea.
In Stock
Door Handle Gasket Set

p/n: 70-0771-69

This Door Handle Gasket Set is designed from the original part for superior fitment and seal. This six (6) piece gasket set will do two (2) doors.

$24.99/set
In Stock
Taillight Lens Gaskets - In Fin

p/n: 70-3117-15

This Taillight Lens Gasket pair is designed from the original part for superior fitment and seal. This reproduction gasket fits between the taillight lens & taillight housing in fin.

$23.69/pr.
In Stock
Battery clamp cover

p/n: 70-0095-21

Cover, battery clamp. Control unsightly sulfate buildup. Help protect the nearby metal and finish. Good copy from original part.Length: 3.5 inches.

$22.59/ea.
In Stock
Headlight Bucket to Fender Seals

p/n: 70-3085-14

This two (2) piece Headlight Bucket to Fender Seal pair is designed from the original part for superior fitment and seal. Die cut from original style masticated rubber for a like factory fit.

$19.69/pr.
In Stock
Hood bumper

p/n: 70-0770-42

Bumper, fender to hood. Correct detail with ridges as original. Four (4) required per car.Length: 1.3125 inches.

$17.19/ea.
In Stock
Hood bumper

p/n: 70-0907-42

Bumper, hood front aligning. Correct design with proper screw thread.Height: 2.50 inches.

$14.49/ea.
In Stock
Masticated Rubber Sheet

p/n: 70-0645-45

Masticated sheet. Three thirty seconds (3/32) inch thick rubber sheet containing random milled cotton cord reinforcement for front end splash aprons, etc. This product is a four (4) foot wide roll, and will only be sold in four (4) square foot multiples

$13.19/sqf
In Stock
Body Mount Isolator

p/n: 70-2232-48

Isolator, body mounting to chassis. Fully molded rubber. One and seven eighths inch (1 7/8") outside diameter by fifteen sixteenths inch (15/16") inside hole diameter by nine sixteenths inch (9/16") height.

$12.99/ea.
In Stock
Body mounting pad

p/n: 70-2233-48

Pad, body mounting to chassis. Fully molded rubber. One and seven eighths inch (1 7/8") outside diameter by eleven sixteenths inch (11/16") inside hole diameter by nine sixteenths inch (9/16") height.

$12.99/ea.
In Stock
Body mounting pad

p/n: 70-2234-48

Pad, body mounting to chassis. Fully molded rubber, square type. Six (6) or more are used per car. Two and three sixteenths inch (2 3/16") square by three fourths inch (3/4") inside diameter hole by one half inch (1/2") inch height.

$12.79/ea.
In Stock
Headlight dimmer switch pad

p/n: 70-0930-14

Pad, headlight dimmer switch. Rubber slip-over cover for floor mounted switch.

$10.89/ea.
In Stock
Rear spring bushing

p/n: 70-0549-35

Bushing, spring and shackle, rear.

$9.69/ea.
In Stock
Wiper motor gasket

p/n: 70-3610-53

Gasket, wiper motor. 1/4" dense die cut rubber.

$9.69/ea.
In Stock
Door Weatherstrip With Clips

p/n: 70-1245-73

Door edge weatherstrip made from high quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$8.79/ft.
In Stock
Brown Door Lock Knob

p/n: 70-0660-70

This is the Knob or push button for the inside door lock. The part fits over 1/8" steel rod to door lock. Neutral brown color that may be lacquered with other colors as required. A hard rubber part fits many different vehicles.

$8.59/ea.
In Stock
2-5/8" Run Channel Mohair Liner

p/n: 70-2863-58

Run channel liner helps reline guide bars on lock side of hardtops and convertibles. Available by the foot.

$7.89/ft.
In Stock
Door Weatherstrip Without Clips

p/n: 70-1244-73

Door edge weatherstrip made from high-quality EPDM sponge rubber. Excellent for use on many different vehicle models. Available by the foot.

$7.29/ft.
In Stock
1/4" Universal Mounting Pad

p/n: 70-0308-17

Mounting pad, continuous for lights, hinges, brackets, and other bright work when no molded pad is available. Available by the foot.

$7.19/ft.
In Stock
2-1/4" Body Hole Plug

p/n: 35-0863-45

Plug, body sheet metal holes. Used in various places (like trunks). For one and one half (1-1/2) inch hole in body.

$6.99/ea.
In Stock
Stabilizer or shock grommet

p/n: 70-0737-33

Grommet, front stabilizer link or shock absorber. Fully molded rubber. One and one eighths inch (1 1/8") by three eighths inch (3/8") inside hole diameter by seven eighths inch (7/8") height. Use as a front stablizer link for 1946-1970 Cadillac: All mode

$6.79/ea.
In Stock
1/16" Cork Sash Channel Filler

p/n: 70-1115-57

Cork sash channel filler. Available by the foot.

$5.99/ft.
In Stock
1/16" Sash Channel Filler

p/n: 70-2170-57

Sash channel filler. Available by the foot.

$5.19/ft.
In Stock
5/32" Filler and Cushion Strip

p/n: 70-1237-48

Filler and cushion strip. Available by the foot.

$5.19/ft.
In Stock
Door or Tailgate Bumper

p/n: 33-1228-71

Bumper pads, door or tailgate. Twin retainer style.

$5.19/ea.
In Stock
Hood Bumper

p/n: 70-1251-42

Bumper, hood to cowl weatherstrip, one fourth (1/4) inch high. For three sixteenths (3/16) inch high see our #70-1250-42.

$5.19/ea.
In Stock
Hood Bumper

p/n: 70-1252-42

Bumper, hood to cowl weatherstrip, five sixteenths (5/16) inch high. For three sixteenths (3/16) inch high see our #70-1250-42.

$5.19/ea.
In Stock
1/16" Filler and Cushion Strip

p/n: 70-1236-48

Filler and cushion strip with a variety of applications. Available by the foot.

$4.99/ft.
In Stock
1/32" Cork Sash Channel Filler

p/n: 70-1114-57

Sash channel filler. Cork. Available by the foot.

$4.99/ft.
In Stock
1/32" Sash Channel Filler Rubber

p/n: 70-2169-57

Sash channel filler. Available by the foot.

$4.99/ft.
In Stock
Door Bumper

p/n: 33-1227-71

Bumper, door edge, twin retainer style. Half (1/2) inch wide, seven eighths (7/8) inch long, and seven sixteenths (7/16) inch high.

$4.49/ea.
In Stock
1" Floor Pan Plug

p/n: 35-0262-20

Plug designed for floor pan, compartment and body. Up to 12 per car, as required.

$4.19/ea.
In Stock
7/8" Trunk Bumper

p/n: 33-0293-87

Bumper, trunk and tailgate lid bumper support, on lid.

$3.49/ea.
In Stock
Lock Cylinder Gasket

p/n: 60-0641-69

This Lock Cylinder Gasket is die cut from one-thirty-second (1/32) inch neoprene.

$2.89/ea.
In Stock